Tender For Special Repair To Bldg No Ps-114 (Usman Auditorium) At Nagrota Mil Stn Under Ge Nagrota
Tender Value
1.34 Crore
Estimated cost
Bid Submission
25 Nov 2026
23 days left
EMD
2.09 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Ps-114 (Usman Auditorium) At Nagrota Mil Stn Under Ge Nagrota
BOQ
| Sl. No. | Item Description |
| 1 | B/R WORKS |
| 2 | Taking down chowkat or frames with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete with hold fasts etc complete all as specified and directed. |
| 3 | Taking down chowkat or frames with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but not exc 4 Sqm each complete with hold fasts etc., complete all as specified and directed. |
| 4 | Taking down shutter of any description area exc 1.0 Sqm but not exc 2.0 Sqm complete all as specified and directed. |
| 5 | Factory made PVC white colour Sliding window three track made of extruded profiles with wall thickness of 2.3mm (+0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2 + 0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Note: The unit rate quoted by contractor excludes cost of glass but includes all other connected accessories. Net Opening will be measured lor payment purpose.(A) Area not exceeding 2.00 Sqm each. |
| 6 | Factory made PVC white colour fixed glazed window/ventilator made of (small series) frame 47mm x 50mm mullion 47mm x 68mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension comprising of PVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100mm x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc., profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 7 | Factory made uPVC of approved colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T-profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T-profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: Casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed(white powder coated) [and 5mm thick glazing with selected quality glass.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories (Net opening will be measured for payment purpose). |
| 8 | Anodised aluminium grill (anodised transparent or dyed to required shade according toIS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as per specified and directed. |
| 9 | 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as per specified and directed. |
| 10 | Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as per specified and directed. |
| 11 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified and directed |
| 12 | 150mm floor door stopper of aluminium power coated alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as per specified and directed. |
| 13 | 4mm thick figured glass, pin head type and glazing fixed with aluminium section in squares not exceeding 0.5 Sqm in each pane complete all as per specified and directed. |
| 14 | 20 to 25 mm dia stainless steel drapery/ Harison rail/ curtain rod with brass/ nickel chrom polish/ decorative finials and brackets, fixed in repairs complete all as specified and approved by Engr-in-Charge including taking out old pelmet with curtain rods complete all as per specified and directed. |
| 15 | Manual horizontal venetian blinds fixed in repairs, including all necessary accessories, brackets, fasteners, mounting hardware, and operating mechanisms. Blinds shall be made of aluminium slats, 25mm width (or as specified), powder-coated finished in approved colour. Slats shall be corrosion resistant, UV-stable, and easy to clean. Installation shall be done on window recess/ surface mounted, complete with cork lock, tilt mechanism, and all operational parts for smooth opening and closing. All works shall be carried out as per manufacturers instructions and as approved by Engr in Charge. |
| 16 | 12 mm thick toughned glass (frosted) one fixed for door (hinges on wall) with steel connectors, top and bottom pivots including all type of fitting and locking arrangement and brass CP handle fancy type 300mm long hole to hole on both sides cutting to shape, drilling required complete fittings complete all as per specified and directed. |
| 17 | Toughned glass 10 mm thick as in hinged windows, partitions similar work including cutting to shape, drilling holes glazing with beads fixed with oil putty glazing with spring clips in metal surrounds metal panel pins spring clips in metal surrounds required complete all as specified and directed. |
| 18 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 19 | 20mm thick granite (of any type of colour) work (table rubbed and polished) in steps, jambs, pillars, window-cills, staircase tread and risers, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Note: Colour will be approved by GE/Engr-in-charge. |
| 20 | Demolition of cement concrete unreinforced in ground floor and paving not exc 15cm thickness (below and above ground level) complete and removing unserviceable material out side the MoD land complete all as per specified and directed. |
| 21 | PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregate) as in plinth protection 50mm thick and finishing the surface even and fair without using extra cement with bitumen and sand mixture joints complete all as specified and directed. |
| 22 | 25mm thick PCC 1:2:4 type B-0 as a sub base to receive topping layer finished even and rough complete all as specified and directed. |
| 23 | Vitrified Ceramic tiles Light/ dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed or bedding layer in CM (1:4) complete all as specified and directed. |
| 24 | All as per srl item No-23 here-in-before but as in skirting, dado including 10 mm rendering in CM 1:4 complete all as specified and directed. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 26 | Glazed ceramic white tiles of size 450mm x 350mm x 7mm thick as on walls/ vertical surfaces such as dados, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 10mm cement rendering in cement mortar 1:4 complete all as specified and directed. |
| 27 | All as per srl item No-26 here-in-before but of size 600mm x 1200mm x 7mm complete all as specified and directed. |
| 28 | Non skid joint free coloured ceramic floor tiles 7mm to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layer in CM (1:6), complete all as specified and directed. |
| 29 | Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and directed. |
| 30 | Brickwork with subclass 'B' bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 31 | All as per srl item No-30 here-in-before but except bricks complete all as specified and directed. |
| 32 | Brickwork with subclass 'B' bricks, as in half brick wall in straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed. |
| 33 | Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water, at any description with necessary scaffolding of max height for G+2 Bldgs etc complete all as specified and directed. |
| 34 | Rendering 10mm thick of fair faces in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed. |
| 35 | Rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work/ concrete surfaces in two layers finished even and smooth with out extra cement with WPC complete all as specified and directed. Note: (i) Water proofing compound on only top layer of plaster (i.e., 5mm thick).(ii) Qty of WPC 200ml per cement Bag as per manufacturer instructions. (iii) WPC shall be measured and paid separately. |
| 36 | Rendering 5mm thick in ceiling cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 37 | Supply only Liquid water proofing compound. |
| 38 | Preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over a coat of primer over 3mm thick wall care putty (in two or more layers) complete all as specified and directed. |
| 39 | Preparation of new plastered surface of walls and finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) over and including 3mm thick wall care putty (in two or more layers), including necessary scaffolding for max height of G+2 bldgs with parapet, etc complete all as specified and directed.Make of Acrylic Smooth exterior paint: Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield). Make of primer: Asian or Equivalent. Note: In one or more shade as approved and directed by GE/Engr-in-Charge. |
| 40 | Removal of existing treatment of old plastered surfaces and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) including 3mm thick wall care putty (in two or more layers), including necessary scaffolding for max height of G+3 bldg with parapet, etc complete all as specified and directed.Make of Acrylic Smooth exterior paint: Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield).Make of primer: Asian or Equivalent. Note: In one or more shade as approved and directed by GE/Engr-in-Charge. |
| 41 | Preparation of old decorated plastered or unplastered surface including complete removal of existing treatment by machinary only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil emulsion distemper on walls over and including 3 mm thick wall care putty (in two or more layers) as specified and directed by Engr-in-Charge. |
| 42 | Preparation of new plastered surfaces of ceiling and applying two coat of white wash, complete all as specified and directed. |
| 43 | Preparation of new surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 44 | PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed. |
| 45 | Machine cut kota stone flooring 20mm to 22 mm thick of any colour laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) each stone not less than 550mm x 550mm over and including 15mm thick screed bed in CM (1:4) as in floor finished rough including applying a coat of cement slurry @ 3 Kg/Sqm of surface complete all as specified and directed. |
| 46 | Machine cut kota stone slab 20mm to 22mm thick in skirting, dado and pillar laid jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) by machine over and including 15 mm thick rendering in CM (1:4) including taking out of existing dado complete all as specified and directed. |
| 47 | All as per srl item No-46 here-in-before but in tread/riser of stair case in single piece complete all as specified and directed. |
| 48 | 20mm thick marble tiles machine cut in Makrana white Marble laid over 15 mm thick screed bed cm (1:4) cement screed and jointed with white/coloured cement slurry including cutting and polishing of type complete all as specified and directed. |
| 49 | Grinding and polishing (mirror finish) old surfaces of marble/ granite/ Kota stone/ stone on work where ever required to give high gloss finish complete to the satisfaction of Engineer-in-Charge. |
| 50 | Demolition of cement concrete (unreinforced) as in roofs, floors (other than ground floors) including roof treatment any type, beams, stair cases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 51 | Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and dircted. |
| 52 | 10mm rendering in CM 1:4 including mixing water proofing compound over roof surfaces finished even and smooth without using extra cement complete all as specified and directed.Note: Qty of WPC 200ml per cement Bag or as per manufacturer instructions. WPC shall be mesured and paid separately. |
| 53 | Applying bituminous primer conforming IS-3384 @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces complete all as specified and directed. |
| 54 | Applying evenly a tack coat of industrial bitumen conforming IS-1203, 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified and directed. |
| 55 | One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.00 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height 60cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing complete all as specified and directed.Note: (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions.(ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions(iii) The make of polymeric membrane shall be IWL India Ltd chennai Ltd or \\"MOPLY FP\\" of Texsa India Ltd).(iv) APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units as per relevent IS. |
| 56 | Cement concrete tiles 25cm x 25cm x 22mm thick machine pressed set jointed and pointed in neat cement slurry on roof over APP membrane laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed. |
| 57 | Applying two coat of aluminium paint over 10 cm width or girth on top of APP membrane complete all as specified and directed. |
| 58 | Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion complete all as specified and directed. |
| 59 | Dismantling of plain or corrugated steel sheeting of any gauge, thickness as in roof covering complete all as specified and directed. |
| 60 | Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-290 (Gde E165) complete all as specified and directed. |
| 61 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 62 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in ridge, hips, valley gutter, drip and straight flashing fixed with self tapping screws complete all as specified and directed. |
| 63 | Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates hand rail, tread, stringer, nosing, riser, newel post etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed. |
| 64 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 65 | Framed work such as grills, gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and similar work conforming to Fe-290 grade-E-165 complete all as specified and directed. |
| 66 | Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 67 | Preparing old steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. Note: In one or more shade as approved and directed by GE/Engr-in-Charge. |
| 68 | Designing fabricating, testing, installing and fixing in reapir position curtain wall with Aluminium Composite panel cladding, with open grooves for linear as well as curvilinear portions of the building, for multi-storied bldgs etc, including: (a) Structural analysis & design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainge of water to make it watertight including checking of all the structural and functional design. (b) Providing fabricating and supplying and fixing panels of aluminium comosite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick almuinium composite the panel material consisting of 3mm thick FR grade mineral core sandwiched between two aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated with Kynar 500 based PVDF/ Lumioflon based fluoropolyme resin coating of approved colour and shade on front side and polymer (service) coating on back side as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5/ MS with Hot Dip Glavanized with serrations and serrated washers to arrest the wind load movement fastener SS 316 Pins and anchor bolts of approved make in SS 316. Nylon seaparaors to prevent bimetallic contacts ali complete required to perform as per specification drawing the item includes cost of all material and labour component the cost of all mock ups at site cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wakk with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is oayable under the relevant aluminium items the Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete. However for the purpose of payment, only the actual area on the external face (incucing width of groove) shall be measured in sqm up to two decimal places.NOTE: 1. Wastage will be expected more as per approved design. No extra payment shall be paid for any wastage at site. 2. Contractor is advised to visit site or GE office in working hours to clarify the approved design.3. The whole work will be executed under supervision of higher officials and GE. |
| 69 | Providing and applying two or more coat acrylic/synthetic decorative textured paint finish on walls surface as per approved shade and pattern, including surface preparation, priming, skimming,base coat, finishing coats, complete all as specified and directed. Note: Colour shall be approved by GE/Engr-in-chrage. |
| 70 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 71 | 15mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed. |
| 72 | Fixing only 15mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed. |
| 73 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed. |
| 74 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 75 | 20mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed. |
| 76 | Fixing only 20mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed. |
| 77 | Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. |
| 78 | 25mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed. |
| 79 | Fixing only 25mm bore GI pipe medium grade with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed. |
| 80 | Gun-metal, globe or gate valves 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as specified and as directed. |
| 81 | Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm complete all as specified and directed. |
| 82 | PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore complete all as specified and directed. |
| 83 | PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 110mm bore complete all as specified and as directed. |
| 84 | PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore complete all as specified and directed. |
| 85 | PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 75mm bore complete all as specified and directed. |
| 86 | PVC (SWR) Bends any radius for 110mm bore complete all as specified and directed. |
| 87 | PVC (SWR) Bends any radius for 75mm bore with oval access door complete all as specified and directed. |
| 88 | 100mm Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 89 | Dismantling of existing unserviceable water tank of any description capacity exc 1000 Ltr but not exc 2000 Ltrs capacity each complete all as specified and directed. |
| 90 | Dismantling of existing unserviceable water tank of any description capacity exc 500 Ltr but not exc 1000 Ltrs capacity each complete all as specified and directed. |
| 91 | Rotational moulded polyethene water storage tank 2000 ltr capacity three layered white in colour hoisted and fixed in position including PVC float valve 20 mm bore and including dismantling of existing water storage tank, complete all as specified and directed. |
| 92 | All as per srl item No-91 here-in-before but 1000 litres capacity complete all as specified and directed. |
| 93 | 20mm Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms. complete all as specified and directed. |
| 94 | 25mm Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms. complete all as specified and directed. |
| 95 | Roughening surfaces of old concrete surfaces of any description over damaged surfaces irregular facia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even followed by 5mm thick rendering in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed. |
| 96 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation board/ slabs/ blankets any thickness including cover fillets complete all as specified and directed. |
| 97 | Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed. |
| 98 | 4 mm thick non asbestos fibre cement building boards 600mm x 600mm thick fixed or laid/ inserted to timber/GI/Aluminium framework with screws and applying two coat of oil bound distemper complete all as specified and directed. |
| 99 | 12 mm thick perforated particle board/tiles for insulation and accoustic purposes, 600mm x 600mm in size, fixed with screws to snap grid frame in ceiling complete all as specified and directed.(i) Fixing of brackets (base metal thickness 0.70mm) as per manufacturers instruction.(ii) Fixing and plug and screws of @800mm c/c on verticle surface.(iii) Fixing of universal channel (web 45m and flange 27mm base metal thickness 0.5 and length 3660mm) as per manufacture instruction.(iv) Insert insulation, 50mm thick, 24 kg/cum,glass wool into the assembled framing system, board are jointing with joint gypsum based joining compund. |
| 100 | Applying two coat of plastic emulsion over coat of base primer including preparation of surfaces complete all as specified and directed. |
| 101 | Perforated gypsum accoustic wall panelling/ tiles 600mm x 600mm of 12mm thick gypsum board round or square hole and insert some different design and colour module which includes provinding and fixing wall angle along the perimeter of the room with help of nylon sleeves and wooden screws at 300mm centres all as manufacturers and approved ISI marked, fixed in repairs complete all as specified and directed.(i) Fixing of brackets(base metal thickness 0.70mm) as per manufacturers instruction.(ii) Fixing and plug and screws of @800mm c/c on verticle surface.(iii) Fixing of universal channel (web 45m and flange 27mm base metal thickness 0.5 and length 3660mm) as per manufacture instruction.(iv) Insert insulation, 50mm thick, 24 Kg/cum,glass wool into the assembled framing system.(board are jointing with joint gypsum based joining compund.(v) Applying two coat of plastic emulsion over coat of base primer including preparation of surface complete all as specified and directed. |
| 102 | GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section of 0.55mm thickness having kurled web of 50mm and flange of 26mm each lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete size of grid 605mm x 605mm complete all as specified and directed. |
| 103 | POP 12mm thick Seamless calcium silicate ceiling made out of 1800mm x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 104 | HDHMR modular bar cabinet/ Kitchen cabinet or basket made from 18mm HDHMR board outer side Germon foil/ acrylic sheet of approved brand and make, moisture resistant, termite resistant, machine pressed high density engineered board suitable for Modular furniture works, including all carcass, shutter, shelves, partitions, drawer units, skirting, edges, banding, hardware fittings, Glass holder, LED profile light, Hydraulic lift-up fittings, Cutlery tray, including connecting accessories stainless steel hinges, Telescopic drawer channels/tanem box system, profile handle 200mm long, Magnetic catchers and all connected fittings including baskets (plain) of minimum size 50cm x 45cm x 10cm made of 4mm minimum dia stainless wire, thali basket (9-10 division) with stainless steel wire, Partecian basket of minimum size 50cm x 45cm x 16cm made of minimum dia, Cutlary basket of minimum size 50cm x 45cm x 10cm made of 4mm mimi dia with stainless wire and bottom of Perforated sheet, bottle pullout of minimum size 50cm x 20cm x 40cm in two tier made of 4mm minimum dia stainless steel wire trolly with 4mm thick 6 Nos whichever is required size and design as per Kitchen arragment, handle 200cm and stainles steel channels and complete installation work including cutting, routing, polishing, fitting, alignment, fixing accessories and finished surface complete all as directed. |
| 105 | Vitreous china wash down water closet pan (pedestal pattern) one piece EWCs with seat cover and twin flush fittings white match to the tiles fixed in repairs complete all as specified and as directed.Note: Cera Cat. No. S1013222 of Size- 650x355x745 with 300 mm \\"S\\" trap Snow white dt Look Book Jun 2025. |
| 106 | Vitreous china wash down water closet pan (pedestal pattern) one piece EWCs with seat cover and twin flush fittings white match to the tiles fixed in repairs complete all as specified and directed.Note: Cera Cat. No. S1013258 of Size-640x350x730 with 300 mm \\"S\\" trap Snow white dt Look Book Jun 2025. |
| 107 | Vitreous china wash basin on counter top laid over and including 20mm granite plated fixed in repairs complete all as specified and directed.Note: Cera Cat. No. S2022103 of Size-600x400x160mm with 300 mm \\"S\\" trap Snow white dt Look Book Jun 2025. |
| 108 | Vitreous China urinal with integrated EFS, size of 375mm x 330mm x 780mm snow white (minimum), with grating and union for discharge pipe with Urinal speder fixed in repairs complete all as specified and directed.Note: Maximum sensing range is 300mm/12inch, Cera Cat. No. S4010101 of Size-375mm x 330mm x 780mm with 300 mm \\"S\\" trap Snow white dt Look Book Jun 2025. |
| 109 | Vitreous China urinal Straight Partition 10 mm thick size of 900mm x 450mm fixed in repairs complete all as specified and directed.Note: Cera Cat. No. S4090103 of Size-900mm x 450mm Look Book Jun 2025. |
| 110 | PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete all as specified and directed. |
| 111 | Toilet paper holder, chromium plated or stainless steel, fixed in repairs complete all as specified and directed. |
| 112 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, fixed in repairs complete all as specified and directed.Note: Cera Cat. No. F8030108AB of Look Book Jun 2025. |
| 113 | CP Pillar tap 15mm bore Long body with crutch or butterfly handle screwed down for iron pipe or for brass ferrule fixed in repair complete all as specified and directed.Note: Cera Cat. No. F1015101 of Look Book Jun 2025. |
| 114 | Fancy angle cock/stop cock 15 mm dia cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.Note: Cera Cat. No.F2002201 of Look Book Jun 2025. |
| 115 | CP Pillar cock with swan neck spount and aerator right side for iron pipe or for brass ferrule fixed in repair complete all as specified and directed.Note: Cera Cat. No. F3001105 of Look Book Jun 2025. |
| 116 | Towel Rail 600mm long of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats, fixed in repairs (Minimum weight 190gms) complete all as specified and directed.Note: Cera Cat. No.F5014103CH of Look Book Jun 2025. |
| 117 | Towel Ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, fixed in repairs (Minimum weight 90gms) complete all as specified and directed.Note: Cera Cat. No.F5014106CH of Look Book Jun 2025. |
| 118 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed in repairs complete all as specified and directed. |
| 119 | Soap dish, vitreous China white, approximate size 160mm x 160mm x 90mm, fixed in repairs complete all as specified and directed.Note: Cera Cat. No.F5003116 of Look Book Jun 2025. |
| 120 | Glass corner Shelf of 300mm long, fixed in repairs complete all as specified and directed. |
| 121 | 6mm thick superior quality mirror glass edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs complete all as specified and directed. |
| 122 | Towel rack 600mm with self hooks 3 Nos wall mounted mounted bathroom, for hanging Keys, lvory required instructions and to the approval of the Engr in Charge complete all as specified and directed.Note: Cera Cat. No F5014131CH of Look Book Jun 2025. |
| 123 | Supply, installation, testing and commissioning of complete automatic sensor operated sliding glass entrance system, including all accessories, fittings, electrical connections, hardware, fixing members and commissioning, complete in all respect Automatic Sensor Sliding Glass Door System Providing, supplying, installing, testing and commissioning of automatic bi-parting sliding glass entrance door system, comprising complete automatic operator assembly, glass panels, sensors, aluminium framing, fittings, fixing hardware and associated accessories, as per following specifications:(a) Door Configuration opening size: 2800mm width and 2400mm of height, Configuration: 02 Nos. fixed side glass panels, 02 Nos. centre sliding glass shutters Centre opening (bi-parting) arrangement.(b) Automatic Operator Provide: Make: dormakaba (DORMA)Model: XL-C 4125 Automatic Sliding Door Operator or approved equivalent BLDC motor operated system Integrated controller Track mechanism Carrier assembly Drive belt assembly End stops Soft opening/closing Automatic calibration Operational selector modes Concealed aluminium header housing complete all as specified and directed.(c) Glass Specification: 12 mm toughened fluted/ribbed safety glass Machine polished edges Finished exposed edges Safety glazing complete For: 02 Nos. fixed panels 02 Nos. sliding shutters complete all as specified and directed.(d) Aluminium Work: Natural anodized aluminium finish Header cover profile Side trims Concealed holding members Matching finishing sections complete all as specified and directed. Please Enable Macros to View BoQ information |
| 124 | Supply, installation, testing and commissioning of complete automatic sensor operated sliding glass entrance system, including all accessories, fittings, electrical connections, hardware, fixing members and commissioning, complete in all respect Automatic Sensor Sliding Glass Door System Providing, supplying, installing, testing and commissioning of automatic bi-parting sliding glass entrance door system, comprising complete automatic operator assembly, glass panels, sensors, aluminium framing, fittings, fixing hardware and associated accessories, as per following specifications:(a) Door Configuration opening size: 2800mm width and 2400mm of height, Configuration: 02 Nos. fixed side glass panels, 02 Nos. centre sliding glass shutters Centre opening (bi-parting) arrangement.(b) Automatic Operator Provide: Make: dormakaba (DORMA)Model: XL-C 4125 Automatic Sliding Door Operator or approved equivalent BLDC motor operated system Integrated controller Track mechanism Carrier assembly Drive belt assembly End stops Soft opening/closing Automatic calibration Operational selector modes Concealed aluminium header housing complete all as specified and directed.(c) Glass Specification: 12 mm toughened fluted/ribbed safety glass Machine polished edges Finished exposed edges Safety glazing complete For: 02 Nos. fixed panels 02 Nos. sliding shutters complete all as specified and directed.(d) Aluminium Work: Natural anodized aluminium finish Header cover profile Side trims Concealed holding members Matching finishing sections complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender