Tender For Addition/Alteration Of Hawa Mahal (T-02) At 901 Su At Air Force Station Nathatop Under Ge (Af) Udh Ur
Tender Value
43.15 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
14 days left
EMD
86300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration Of Hawa Mahal (T-02) At 901 Su At Air Force Station Nathatop Under Ge (Af) Udh Ur
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr in deep for sewage lines/manholes etc.n.exc 10 sqm on plan and getting out in any type of soil. |
| 2 | Returning filling including spreading watering and well ramming in layers n.exc 25cm thick in hard/dense soil. |
| 3 | Removing excavated soil to a distance n.exc 50m & depositing where directed at a level n.exc 1.5m above the starting point. |
| 4 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering complete all as specified and as directed by Engineer-in-Charge. |
| 5 | S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenght of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screw or L type or J type hook all as specified and directed. |
| 6 | S & F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strenght of 550 Mpa as in roof covering, fixed with self tapping screw or L type or J type hookcomplete all as specified and as directed by Engineer-in-Charge. |
| 7 | M & L in repairs APP based polymeric water proofing membrane ,five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed.Note : The rate quoted shall be deemed to include for dismantling and refixing in position of lightening protection after carrying out the treatment at height upto 20.0 mtr from avg ground level (including scaffolding if required) for all type building complete all as specified and as directed. |
| 8 | M&L for applying evenly a tack coat for roof treatment of industrial bitumen 85/25 at the rate of 0.40 Kg per Sqm including cleaning surfaces, complete at height upto 20.0 mtr from avg ground level (including scaffolding if required) for all type building complete all as specified and as directed. |
| 9 | Material and Labour for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) all as specified and as directed . |
| 10 | Material and Labour applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface n.exc 10 cm width or girth complete all as specified and as directed . |
| 11 | M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted totimber/GI/Aluminium framework with screwscomplete all as specified and as directed by Engineer-in-Charge. |
| 12 | Supply & Fix for anodised aluminium snap grid of size 605 x 605 mmm frame work for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifiedall as specified |
| 13 | S & F wall panelling on existing wall surface made out of PVC hollow profile section of size 150mm x 10mm with a wall thickness of 1mm (+/-) 0.2mm to be fixed on wall by self tapping scew of size 19mm x 6mm after puttin rawal plugs.The edge and periphery finaly to be covered by extruded PVC corner angles beading section of size 28mm x 12mm with wall thickness of 1mm complete all as specified and as directed by Engr-in-Charge. |
| 14 | Excavating in post holes (or similar holes) in soft soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed . |
| 15 | Material and labour for providing cement concrete in foundations 1:4:8 type D2 ( using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed |
| 16 | Supply and fix rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and as directed . |
| 17 | Suuply and fix rolled mild steel roof truss ( framed ) , trussed , purlins , crane gantries , rails and fastenings and heavy bracket framing ( beam , tee , angle , channel or flat sections ) including distance pieces , cleats conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and as directed . |
| 18 | Supply and fix plates ( plain or chequered ) as per IS-3502 ( Base IS-10748 Gr-II ) square or rectangular cut or notched ( ordinary and counter shunk ) forming holes , without any attachment complete all as specified and as directed . |
| 19 | Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut of 11 to 15 mm dia and exceeding 15 cm and n.exceeding 22.5 cm long complete all as specified and as directed. |
| 20 | M&L for preparation of new steel and iron surfaces exceeding 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed. |
| 21 | M&L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed. |
| 22 | Demolition of Brick/ stone / boulder masonry built in cement morter complete all as specified and directed . |
| 23 | Dismantling boarding of any description fixed in any position with nails, complete all as specified and as directed. |
| 24 | Material and labour for brickwork with subclass designation 75 , old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & directed. |
| 25 | Material and labour for RCC (nominal Mix ) type B1 1:2:4 (20 mm graded aggregate) as in RCC Beams, contilevers, bressummers, lintels over 1.50 m span complete all as specified and directed by Enginner-in- Charge. |
| 26 | Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Enginner-in- Charge. |
| 27 | All as per item no.26 above but 5 to 10 mm dia as in stirrups complete all as specified and as directed . |
| 28 | Material and Labour form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Complete all as specified and as directed by Engr-in-Charge. |
| 29 | Taking down cement plaster of any description on Brick Walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc complete all as specified and as directed by Engineer-in-Charge. |
| 30 | M&L for 15 mm thick rendering in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and fair complete with water proofing compound on outer layer complete all as specified and as directed by Engineer-in-Charge. Note:-Water proofing compound shall be measured and paid separately under the respective item. |
| 31 | Supply only Liquid water proofing compound . |
| 32 | M&L for 15 mm thick rendering on fair faces of brick/concrete or stone surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Material and labour for applying three coats of white wash on new plastered surface of wall including preperation of newly plastered surface complete all as specified and as directed . |
| 34 | M&L two coats of exterior acrylic paint of any shade in camouflage pattern over a coat of primer as approved by GE on new plastered surfaces of walls and the like etc and in any tint including preparation of new plastered surfaces complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L 40 mm th PCC 1:2:4 type B1 using 20 mm graded aggregate as in flooring, finished fair and even. |
| 36 | M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base of the floor. |
| 37 | M&L 10 mm thick light shade Vitrified tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile, etc complete all as specified and directed. |
| 38 | M&L for laminated wooden flooring of size 1214mm x 193mm x 8.00mm thick type AC-3 and fixing by using a coat of approved adhesive not less than 1.32 kg/sqm by weight over 2mm thick foam over existing surface all as specified and directed. |
| 39 | M&Lbroken stone or boulders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, all as specified. |
| 40 | M & L PCC 1:3:6 type C-2 75mm thick (using 40mm graded aggregate) as in plinth protection finished the concrete surface even and smooth W/O using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 42 | M & L 15mm thick screed bed or bedding layer in cement mortar1:4 for laying floor finishes, finished even and fair complete all as specified and as directed by Engineer-in-Charge. |
| 43 | M & L for Non skid tiles coloured flooring with tile size exc 0.06 sqm and n.exc 0.11 sqm each tile, 7-8mm thick of any colour pattern in floor set and jointed in grey cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified and as directed by Engineer-in-Charge. |
| 44 | M&L Rendering 10 mm thick on wall and the like to receive tile in cement mortar (1:4), complete all as specified and as directed by Engineer-in-Charge. |
| 45 | M&L Coloured glazed ceramic tiles of size 300x450x7mm to 8mm thick in dado’s/skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete all as specified and as directed by Engineer-in-Charge. |
| 46 | Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame), complete all as specified and as directed. |
| 47 | All as per item No (46) here-in-before but exc 1.5 sqm but n.exc 4sqm each complete all as specified and as directed. |
| 48 | S & F for Pressed steel frames 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed by Engineer-in-Charge. |
| 49 | M & L for PCC 1:3:6 type C-0 (using 12.50 mm graded aggregate) for filling of Steel door frames complete all as specified and as directed by Engineer-in-Charge. |
| 50 | M & L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) for fixing of Steel door frames complete all as specified and as directed by Engineer-in-Charge. |
| 51 | S&F Factory made 2nd class hardwood plain framed panelled shutters 35mm thick (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board med density/wood particle board with commercial face veneers fixed to chowkats complete all as specified and as directed by Engineer-in-Charge. |
| 52 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed by Engineer-in-Charge. |
| 53 | S & F Factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails MS framed shall be covered with neat moulded plain coloured PVC 'C' channel having PVC sheet ship if 20 mm width stuck inside with solvant cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent gear supply and fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge. |
| 54 | S & F aluminium anodised barrel tower bolts extruded section of 150 mm, long complete all as specified . |
| 55 | S & F aluminium anodised handles fabricated type extruded section of 150 mm, long complete all as specified . |
| 56 | S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified . |
| 57 | S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 58 | M & L steel window (box type) factory made with side hung shutters including pintle hinge, steel handle, steel peg stay,and all locking arrangement complete with glazing bars devetailed or welded, complete all as specified and as directed.Note :- Glazing shall be measured and paid separately |
| 59 | Supply and fix 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane fixed with steel frame work complete all as specified and directed . |
| 60 | S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with, front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed. |
| 61 | S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. |
| 62 | S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning all as specified and as directed. |
| 63 | S&Fin repair basin mixer single liver without popup waste system with 450 mm long Braided Hoses complete all as specified and as directed.Make:- Cat No CQT-23167B of Jaquar or equivalent. |
| 64 | M&L in repairs 32 mm waste fittings, brass, chromium plated for glazed wash basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed to waste pipe complete all as specified and directed. |
| 65 | Supply and fixing in repairs 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed of wooden plugs with CP brass screws complete all as specified and directed by Engineer-in-Charge. |
| 66 | S&F in repairs 450mm long PVC connections 15mm bore with PTMT nuts of length complete all as specified.. |
| 67 | S&F in repairs 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified. |
| 68 | Supply and fix in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe of 15mm bore all as specified and directed. |
| 69 | S & F in repairs 32mm dia PVC flexible waste pipe 1100 mm long for WHB complete all as specified and as directed. |
| 70 | S&F in repair 15 mm dia bib tap cast copper alloy (fancy type), chromium plated ,'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule all as directed. |
| 71 | S&Fin repair Wall mixer with provision for Overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges complete all as specified and as directed.Make:- Cat No CQT-2327UPR of Jaquar or equivalent. |
| 72 | Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store |
| 73 | Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store |
| 74 | S&F GI tubing medium grade 15mm bore dia with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 75 | S&F GI tubing medium grade 20mm bore dia with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 76 | S & F in repairs 15mm bore angle valve with flnge all as directed by Enginner-in-Charge.Make:- Cat No-CON-059KN of Jaquar or equivalent. |
| 77 | S & F in repairs 110 mm dia PVC (SWR) pipe single socketed with rubber ring joints, laid in trenches or in floors including including clamps all as specified and directed. |
| 78 | S & F in repairs 110 mm dia PVC (SWR) pipe single socketed with rubber ring joints,fixed to walls including including clamps all as specified and directed. |
| 79 | S & F in repairs 75 mm dia PVC (SWR) pipe single socketed with rubber ring joints, laid in trenches or in floors including including clamps all as specified and directed. |
| 80 | S & F in repairs 110 mm dia PVC (SWR) junction single,(Single T) equal or unequal |
| 81 | S & F in repairs 110 mm dia PVC (SWR) vent cowl |
| 82 | S & F in repairs 110 mm dia PVC (SWR) bend any radious |
| 83 | S & F in repairs 75 mm dia PVC (SWR) bend any radious |
| 84 | S & F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified. |
| 85 | S & F in repairs 100mm dia grating of PTMT (Minimum weight 25 gms) complete all as specified and as directed. |
| 86 | S & F for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 87 | S & F in repairs 110 mm dia PVC (SWR) 'P' trap coplete all as specified. |
| 88 | M&L 25mm th PCC 1:2:4 type BO (using 12.50 mm graded aggregate) laid below floor tiles complete all as specified and directed. |
| 89 | M&L 15mm thick screed bed or bedding layer in cement mortar 1:6 as in floors complete all as specified and directed. |
| 90 | M&L chequred cement concrete tiles in repairs of size 30cm X 30 cm X 25mm thick,with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 91 | M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base |
| 92 | M&L for sand (cushioning) filling under floors including watering and consolidation all as specified and as directed by Engr- in -charge. |
| 93 | M&L in repairs Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with gray cement and pigment etc, complete all as specified and as directed by Engineer-In- Charge. |
| 94 | Providing precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cover slabs (for manholes and drains etc.), water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 including necessary formwork and removing of old broken cover slab complete all as specified.Note: Reinforcement shall be measured and paid for separately. |
| 95 | Dismantling timber scantling 40 Sq. cm and over in section, in any position, framed work complete all as specified and as directed by Engr-in-Charge. |
| 96 | M & L for sand filling under floor including watering and leveling complete all as specified and as directed by Engr-in-Charge. |
| 97 | E/M PORTION |
| 98 | Supply and fixing of DWC HDPE tubing of black colour 63 mm bore for open/underground laying cable, cut to size and making the tubing for cable protection including cutting of road etc/cutting of PCC and making the good surface complete all as specifie |
| 99 | M&L for point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through PVC conduits with sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. |
| 100 | All as per serial item No.98.00 here-in-before but for size 1.5 Sqmm on Independent board complete all as specified and directed |
| 101 | All as per serial item No.98.00 here-in-before but for size 1.5 Sqmm on same board complete all as specified and directed |
| 102 | All as per serial item No.98.00 here-in-before but for size 2.5 sqmm for 15 amp socket on independent board complete all as specified and directed |
| 103 | M&L for white cover plate with frame 6 module complete all as specified and directed. |
| 104 | M&L for white cover plate with frame 8 module complete all as specified and directed. |
| 105 | M&L for white cover plate with frame 2/3 module complete all as specified and directed. |
| 106 | M&L for modular metal flux box 6 module complete all as specified and directed. |
| 107 | M&L for modular metal flux box 8 module complete all as specified and directed. |
| 108 | M&L for modular metal flux box 2/3 module complete all as specified and directed. |
| 109 | M&L for modular blanking plate complete all as specified and directed. |
| 110 | Supply and fix modular switch , 1 way 6 Amp 1 module singe pole one way complete all as specified and directed |
| 111 | Supply and fix modular socket outlet 2/3 pin, 6 amp complete all as specified and directed. |
| 112 | Supply and fix modular switch , 1 way 16 Amp 1 module singe pole one way complete all as specified and directed |
| 113 | Supply and fix modular socket outlet 2/3 pin, 16 amp complete all as specified and directed. |
| 114 | Supply and fix Ceiling rose, surface bakelite 65 x 50mm, two to three terminals complete all as specified and as directed. |
| 115 | Supply and fix in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of capacity 20 Amp including taking down all as specified and as directed. |
| 116 | S&F Exhaust fan of size 250/300 mm sweep including high speed induction motor, metal body & blades, power coated minium air delivery 1000 M/Hr with wire mesh guard, mounting frame, nits as required single phase 230V AC, 1400 RPM including electric connection from ceiling rose to fan connector with PVC insulated 2 core copper cable of size 0.75 sq.mm complete all as directed.Make : Havells/Cromption/Bajaj |
| 117 | Supply and fix electric water heater storage geyser vertical/horizontal type steel body with steelinner tank and heating element upto 2 to 3 KW capacity 25 litre 220 to 240 volt , BEE 5 Star rated with temperature range between 25 0 C to 75 0 C including adjustable via a high-precision thermostat. up to 8 bar (8MPa) IP 54/65 complete with all accessoriessuch as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. |
| 118 | M&L in repair Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface/concealed in PVC casing caping/ PVC conduit heavy duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. |
| 119 | M&L Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface cashing capping, heavey duty and connected to main board and making good disturbed surface complete all as specified and as directed. |
| 120 | M&L Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface/concealed in PVC casing caping/ PVC conduit , heavey duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. |
| 121 | S&F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, single door with IP 43 protection, suitable for mounting MCBs all as specified and as directed including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. |
| 122 | M&L in repair MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. |
| 123 | M&L in repair MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. |
| 124 | S&F in repair building security light 35 W, street light, energy efficient should stays on as long as motion is detected. then dims to 20% if no movement is detected for 90 seconds. inbuilt microwave sensor. suitable for indoors/ outdoors with high efficient high power LED enclosed with toughened qlass and voltage rated 220V to 240V etc complete all as specified and directed |
| 125 | S&F in repair Street light bracket made out of 32/40 mm dia GI light grade tubing not less than .75 Mtr long bend to shape including pole clamps/fastners clips nails made out flat iron and nuts, bolts and washers etc complete all as specified and directed. |
| 126 | S&F in repair Recess mounting type fitting LED indoor luminaire powder coated, CRCA or powder coated aluminium panel 2' x 2' (Appx) system wattage 36 watt (cool white), minimum system lumen efficacy not less than 80 % , CRI not less than 80, colour temperature not less than 6000 K, power factor not less than 0.95, LED driver with constant output voltage and current at input voltage of 140volt to 285 volt AC, 50 HZ, Surge Protection>2 KV, IP protection IP 20, powder coated housing with ashthetic bottom frame, with excellent heat dissipation through high thermal conductivity, high efficiency transulence diffuser, suitable for any type of ceiling system including connection with PVC insulated copper conductor 3 core cable of 0.50 sqmm complete all as specified. |
| 127 | Supply and fix in replacement of LED lights fitting Four feet 1x 20 Watt LED 6500K, 220V,AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down all as specified and directed by Engr-in-Charge. |
| 128 | Supply and fix in replacement of LED lights fitting Two feet 1x 10 Watt LED 6500 K, 220V,AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down all as specified and directed by Engr-in-Charge. |
| 129 | S & F wall LED decorative lamp with frosted glass chrome finish suitable for 230 V AC, 50 Hz complete all as specified and directed with driver, holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down all as specified and directed by Engr-in-Charge. |
| 130 | Supply, installation, testing, commissioning & electrically connected feeder pillar outdoor type, single door compartmentized with looking arrangement canopy at top weather proof, verman/dust proof of suitable size cubical type factory made of CRCA MS sheet 3.15 mm thick machine pressed of size 60x60x40 cm & angle iron frame 40x40x6 mm for legs and including grouted in PCC 1:2:4 type B1 (20 mm graded stone aggregate) suitable 440 volts AC 3 phase 4 wire bus bar 4 pole made out of suitable size copper strip capacity 200 Amps with 01 No MCCB 415 Volt ,50HZ ,100 Amps,25KA bracking cap ,adjustable thermal setting ics=100% icuFully mounted on procelain insulator enclosed chamber with open able shutter both sides comprising with following complete all as specified and directed.PROVISION FOR CABLE ENTRY :- The provision for cable entry / exit shall be provided from the bottom for both incoming and outgoing cables through and including cable gland adge of BrassCONTROL WIRING :- All control wirings shall have to be carried out with 1100 volts rated FRLS grade PVC insulated (Gray Colour) multi-flexible type copper wire of cross sectional area 1.50 Sq mm and shall be properly bunched,tied and dressed, ferrule marked for proper identification and crimped with suitable size & type of tinned copper lugs and shall be wrapped with PVC spring type flexible pipes near the door hinges.INCOMING :- (i) S&F MCCB of capacity 100 Amp with , 4 Pole, 25 KA, 50 Hz complete ----- 02 No. INSTRUMENTATION SYSTEM :-LED Phase Indicating light, shrouded type, 22mm, with cluster LED - 01 set of 3 lamps (RED,YELLOW & BLUE)Digital Multifunction meter - 01 No. |
| 131 | Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked of size 70 Sq.mm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed. |
| 132 | All as per item No 130 herein before of size 25 Sq.mm 4 core complete all as specified and directed. |
| 133 | M&L Earthing complete with Galvanised steel earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick as earth buried directly in ground (earth pit not less than 2.25 Meter deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using GI earth lead wire 4.0 mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including jointing of earth electrode and earth wire by means of welding, all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20 mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal and salt around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site complete all as specified and directed. |
| 134 | Material and Labour for earth continuity conductor or main galvanised iron wire of size 4.00 mm burried in ground, fixed to wall, any other indicated situation for loop earthing and the like upto test point on necesarry insulators and fastning screws, rawl plugs complete all as specified and directed. |
| 135 | Supply and Fixing in repair insulated 1000 ltr 8 layer triple Puff PVC Tank, of pure virgin plastic, food-grade, UV-stabilized plastic having anti bacterial, Extra strong heavy Lid, heavy durable quality, 8 layer triple puff with +/- 5 degree celcius Temperature control in puff quality, vertical cylindrical tanks with a flat base including fixing and making PCC foundation for placing the PVC tank including removal of old un insulated PVC tank of any size all as specified and directed by Engr-in-charge. |
| 136 | Supply and lay 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 6 (PN 20) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply of outer dia (OD) 63 mm including all PP-R plain & brass threaded polypropylene random fittings laid in trenches with all PPR brassfittings complete all as specified and directed. |
| 137 | Supply and lay 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 6 (PN 20) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply of outer dia (OD) 40 mm including all PP-R plain & brass threaded polypropylene random fittings laid in trenches with all PPR brassfittings complete all as specified and directed. |
| 138 | Supply and lay 3- layer PP-R Polypropylene random copolymer) concealed pipes SDR 6 (PN 20) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply of outer dia (OD) 25 mm including all PP-R plain & brass threaded polypropylene random fittings laid in trenches with all PPR brassfittings complete all as specified and directed. |
| 139 | Supply and fixing of foam insulation 19 mm thick suitable for GI /PPR Pipe of dia 25 mm suitable for -50 0 C to +75 0 C including jointing material such as tape aluminium for self adhesive solvent adhesive etc including aluminium for cladding complete all as specified and directed at site by Engr-inCharge Please Enable Macros to View BoQ information |
| 140 | Supply and fixing of foam insulation 19 mm thick suitable for GI /PPR Pipe of dia 25 mm suitable for -50 0 C to +75 0 C including jointing material such as tape aluminium for self adhesive solvent adhesive etc including aluminium for cladding complete all as specified and directed at site by Engr-inCharge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender