Tender For Special Repair To Jcos Md Accn Bldg No T-07 And Fol Storage Under Age B/R-I At Ge Gurdaspur.
Tender Value
39 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
19 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurdaspur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Jcos Md Accn Bldg No T-07 And Fol Storage Under Age B/R-I At Ge Gurdaspur.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for taking down wooden roof trusses, coupled rafters or trussed beams, for span 4 to 8mtr all as specified and directed. |
| 2 | Dismantling timber scantlings 40 sqcm and over in section, in any position. |
| 3 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 4 | Dismantling of asbestos cement corrugated or semi corrugated sheets in roof covering of any gauge and thickness complete all as specified and directed. |
| 5 | Dismantlling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid & bedded & pointed in cement mortar,complete all as specified and directed |
| 6 | Taking down chowkats with shutter n. exc 1.50sqm each (without taking off shutter for the chowkats and removing to store complete all as specified and directed. |
| 7 | Taking down chowkats with shutter exc 1.50sqm but n.exc 4 Sqm each (without taking off shutter for the chowkats and removing to store complete all as specified and directed. |
| 8 | Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars & precast concrete masonry etc complete all as specified & directed by Engr-in-Charge. |
| 9 | M&L brick work with fly ash brick old size, straight or curved on plan exc 6m mean radius built in CM1:6 complete all as specified & directed. |
| 10 | M&L for non skid coloured ceramic tiles (premium quality) 7 to 8mm thick joint free square/ rectangular, 600mm x 600mm size, as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 including taking down existing tiles & cement mortar bedding and removing the rubbish to a distance all as directed by Engineer-in-Charge. |
| 11 | M&L for non skid coloured ceramic tiles (premium quality) 7 to 8mm thick joint free square/ rectangular, 600mm x 600mm size, as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 after roughening surface of old concrete floor by picking, sweeping and washing down with water to remove dust complete all as specified and directed. |
| 12 | All as per srl item No 11 here-in-before but on vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick backing plaster/ cement screed in cement mortar 1:3 complete all as specified and as directed. |
| 13 | M&L for glazed ceramic coloured tiles of premium quality, size 450mmx300mmx7mm thick joint free as on vertical surfaces such as dado/skirting etc laid over and including 10mm thick screed in cement mortar 1:4, set and jointed in neat cement slurry and pointing in white cement with pigment to match, including taking down existing tiles & cement mortar bedding and removing the rubbish to a distance all as directed by Engineer-in-Charge. |
| 14 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base (to raise level) concrete complete all as specified and directed. |
| 15 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in 40mm thick floor and finished even and smooth without using extra cement complete all as specified and directed. |
| 16 | Taking down cement plaster of any description on brick or concrete surfaces etc of walls/ ceiling etc. including racking out joints hacking for key, scrubbing down with water surfaces of any description complete all as specified and directed. |
| 17 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces of walls, surface finished even and fair complete all as specified and directed. |
| 18 | M&L for rendering 12mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces of walls, surface finished even and fair without using extra cement complete all as specified and directed. |
| 19 | M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 20 | M&L for preparation of old plastered surface of wall by complete removal of existing treatment and applying two coat of cement base paint, complete all as specified and directed. |
| 21 | M&L preparation of new plastered surface and applying two coats of oil bound distemper on wall over a coat of primer complete all as specified and directed. |
| 22 | M&L for preparation of old plastered surface by complete removal of existing treatment and and applying two coats of oil bound distemper on wall over a coat of primer and 2mm thick wall care putty complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surface of wall and applying three coat of white wash on wall complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and directed. |
| 25 | M&L for preparation of old plastered surfaces of wall by brooming down, making good holes, cracks, etc and applying one coat of white wash, complete all as specified and directed. |
| 26 | M&L for preparation of old plastered surfaces of ceiling by brooming down, making good holes, cracks and applying one coat of white wash complete all as specified and directed. |
| 27 | S&F steel window box type made of ERW tube, hollow P section of size 60mmX25mm double rebated outer frame comprising double skeleton shutters i.e. guaged & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 including one shop coat of priming and two coats of synthetic enamel paint and taking down old existing window complete:- (i) Thickness of the sheet shall be of 18 gauge (ii) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (iii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iv) MS Tower bolt 150mm long-02 Nos per leaf (v) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (vi) Cleat 55mm long of hollow square 15mmX12mm -01 Nos per leaf (vii) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (viii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). Note: Wire cloth, glass, shall be measured and paid for separately |
| 28 | S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/ TD-1019/08 Sh 1/3 to 3/3 including making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, including one shop coat of priming and two coats of synthetic enamel paint including taking down old existing window/ ventilator complete all as specified and directed. Notes:- (i) Thickness of the sheet shall be of 18 gauge. (ii) Glass/ wire mesh, shall be measured and paid for separately. |
| 29 | S&F pressed steel frame for doors with one or more rebate including necessary lugs, hinges, lock strike, plate etc complete of size 105mmx60mm including filling PCC 1:3:6 type B-1 (using 20mm graded crushed stone aggregate) in the frames including one shop coat of priming and two coats of synthetic enamel paint complete all as specified and directed. |
| 30 | S&F pressed steel frame for doors with one or more rebate including necessary lugs, hinges, lock strike, plate etc complete of size 125mmx60mm including filling PCC 1:3:6 type B-1 (using 20mm graded crushed stone aggregate) in the frames including one shop coat of priming and two coats of synthetic enamel paint complete all as specified and directed. |
| 31 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stanless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being ermite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (MS hold fast/ lugs or stainless steel dash fasteners shall be paid for separately). |
| 32 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification & drawing complete all as specified and directed. |
| 33 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter, 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing butt hinges of required size with necessary fully body threaded star headed counter sunk stainless steel screws complete all as specified and directed. |
| 34 | S&F 2nd class hard wood factory made glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc , sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) ; fitted to chowkats complete all as specified and directed. |
| 35 | S&F in repair 25mm thick flush shutter solid core block boards, grade 2 quality interior grade, decorative type with decorative face veneer on two faces, fixed with screws to frame work including teak wood lipping 6mm thick alround fixed with nails complete all as specified and directed. |
| 36 | M&L for preparation of new wooden surface exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 37 | M&L for preparation of old painted wooden surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 38 | M&L for preparation of new steel surface exc 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 39 | M&L for preparation of old painted steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 40 | S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed. |
| 41 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm each complete all as specified and directed. |
| 42 | S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares nexc 0.50 Sqm each including hacking out of old broken glass panes from wooden or steel frame complete all as specified and directed. |
| 43 | M&L for green marble work 16mm to 18mm thick (table rubbed and polished) in steps, jambs, pillars window cills , cooking platforms, stair case and the like with bull nosing in cement mortar ( 1:4) incl pointing in white cement ( 1:2) using marble dust with admixture of pigment to match with marble shade including making grooves for slip guard on steps, edge moulding, making 30mm dia hole in cooking counter slab & green marble top for gas pipe including 15mm screed in cement mortar 1:4 complete all as specified and directed. (Marble shall be fixed in one piece only i.e no joint shall be provided). |
| 44 | S&F in repair sinks with drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, waste coupling and waste pipe , including cantilever cast iron brackets and connecting union to pipe, overall size 915 mm x 460 mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 45 | S&F in repair, vitreous china wash hand basin, white flat back, size 550mm x 400mm including brackets, brass CP waste coupling, cutting for and pinning in ends of bracket complete all as specified and directed. |
| 46 | S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest, including connection to trap and lime concrete bedding complete all as specified and directed. |
| 47 | S&F in repair PVC low level dual flushing cistern 10ltr capacity, with syphonic action PVC float valve and 32mm bore PVC flush pipe etc complete all as specified and directed. |
| 48 | S&F in repair 600mm X 450mm (minimum size) bevelled edge mirror of selected quality glass fancy type and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 49 | S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long with flanges complete all as specified and directed. |
| 50 | S&F in repair PVC waste pipe 32mm dia 800mm to 1200 mm long fixed to wash fitting of wash basin and sink all as specified and directed. |
| 51 | S&F in repair brass chromium plated shower rose fancy type 125mm size with swivel joints, including fixing to steel pipe or union with brass CP arm 225mm long, 15mm size complete all as specified and directed. |
| 52 | S&F in repair 15mm bore pillar tap, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long shank screwed for iron pipe complete all as specified and directed. |
| 53 | S&F in repair angle valve 15mm bore fancy type, chromium plated with crutch or butterfly handle screwed down, high pressure, screwed on both ends, fixed with iron pipe etc complete all as specified and directed. |
| 54 | S&F in repair conclead stop cock 15mm bore fancy type , chromium plated with crutch or butterfly handle screwed down, high pressure, screwed on both ends, fixed with iron pipe etc complete all as specified and directed. |
| 55 | S&F in repair bib tap cast copper alloy chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. |
| 56 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 57 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60cm long complete all as specified. |
| 58 | S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified. |
| 59 | S&F in repair grating doom with waste hole 125mm dia of PTMT (minimum weight 25gms) complete all as specified. |
| 60 | S&F 500 litres capacity ISI marked rotational moulded polyethylene triple layered water storage tanks white ISI marked (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I, including 20mm bore ball brass valves, high pressure, with polythene float and flynut, dismantling of existing water tanks complete all as specified and directed. |
| 61 | S&F GI tubing 15mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings including taking up or down existing pipe complete all as specified and directed. |
| 62 | S&F PVC (SWR) pipes 75mm bore in any length with rubber ring joints laid in trenches or floors complete all as specified and directed. |
| 63 | S&F aluminium anodized barel tower bolt of extruded section 150mm long complete all as specified and directed. |
| 64 | S&F aluminium anodized barel tower bolt of extruded section 100mm long complete all as specified and directed. |
| 65 | S&F aluminium alloy handle fabricated type anodized of size 150 mm long complete all as specified and directed. |
| 66 | S&F aluminium alloy handle fabricated type anodized of size 100 mm long complete all as specified and directed. |
| 67 | S&F aluminium alloy, anodised, 250 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 68 | S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs,including roller and roller plate, fixing through welding/bolt in metal/wooden frame or necessary alternative arrangements to be done complete all as specified and directed. |
| 69 | S&F hasp and staple of size100mm, safety type of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 70 | S&F in repair cutrain rod 20mm dia of anodised aluminium alloys with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug including taking down existing curtain rod and decorative complete all as specified and directed. |
| 71 | S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed |
| 72 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 73 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed. |
| 74 | M&L for non asbestos fibre cement building boards 6mm thick in ceiling flat or sloping, fixed or laid/ inserted to timber/GI/ aluminium framework with screws complete all as specified and directed. |
| 75 | S&F powder coated GI snap grid frame work for false ceiling all as specified size of grid 605 x 605mm with GI angle of 25x 25 x1mm, main 'T' of 38 x25x 1.5mm and secondary 'T' of 25x25x1.2mm complete all as specified & directed. (suspension wire for measuring fixing snap grid measured and paid under separate item). |
| 76 | M&L for cement concrete 1:2:4 type B-1 (using 12.50mm graded crushed stone aggregate) as in roof padding using water proofing compound including demolition of existing padding complete all as specified and directed. Note : Water proofing compound shall be measured and paid separately. |
| 77 | M&L for 10 mm thick redering on fair faces of concrete surfaces in CM 1:4 with water proofing compound all as per manufacturar instruction by weight of cement and on concrete surface complete all as specified and directed. (Note:- water proofing compound shall be measured and paid separately) |
| 78 | M&L for APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick, reinforced with polyster non woven fabric (weight not less than 150 gms/ Sqm) by forced application with butane torch over entire roof area with minimum overlaps of 100mm at the sides/ longitudinal edges of strips membrane and 150mm at the ends and sealed in over a coat of hot bitumen grade 85/25 grade @ 1.6 Kg/Sqm ,over a coat of bitumen primer @ 0.40 kg /Sqm after cleaning surface and finally APP membrane will be finished with two coats of aluminium paint complete all as specified and directed. |
| 79 | M&L for cement cocnrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as directed and specified. |
| 80 | M&L for colour chequered cement concrete tiles with pigment of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed in CM 1:6 jointed cement slurry mixed with pigment to match complete all as specified and directed. |
| 81 | Supply only integral water proofing compound. |
| 82 | Roughing the surface of old concrete floor picking sweeping clean and washing down with water to remove dust/mud etc.and brushing ith neat cement slurry @ 3kg/Sqm all as specified and as directed. |
| 83 | Demolition of cement concrete of any description and in any position (above/below of ground level) not otherwise specifically provided as in sunken floor, plinth protection, roof kerb, foundation etc. all as specified and directed. |
| 84 | M&L for cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection thickness of 75mm finishing the surface even and fair with joints to full depth at corners, along the wall and @ 3 meter c/c filled with mastic mortar complete all as speicified and directed |
| 85 | S&F machine cut kota stone slab flooring 18 to 20mm thick over cement screed base 20mm thick in 1:6 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (with bees wax polish) including demolition existing complete all as specified and directed by Engineer-in-Charge. |
| 86 | Demolition of RCC of any description including cutting of reinfrocement of chhajja, facia, parapet, projection, shelves etc with necessary scaffolding all as specified and directed by Engr-in charge. |
| 87 | Use and Waste formwork to rough finished surface of concrete flat to soffits of shelves, chajjah, fin etc including supports over hangs complete all as specified and directed |
| 88 | S&F of TMT bars 6 to 8mm dia bars cut to length bent to shape including cranking binding spiraly, hooping, hooking end and binding with MS wire (anealed) not less then 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 89 | M&L for RCC in 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in chajjas facia, shelves etc and similar work, complete all as specified and directed. |
| 90 | M&L for rendering 5mm thick plaster on ceiling in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 91 | M&L for preparation of old plastered surface of walls including rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, making good holes, cracks, etc and applying two coats of colour wash upto 12m ht incl cleaning the floor/ joinery surfaces, glass pane all as directed by Engr-in-charge |
| 92 | M&L for preparation of old plastered surfaces of ceiling including rubbing down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, making good holes, cracks, etc and applying two coat of white wash on Ceiling incl cleaning the floor/ joinery surfaces, glass pans all as directed by Engr-in-charge |
| 93 | S&F 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels on both side complete all as specified and directed. |
| 94 | Dismantling of cast iron, PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches, if required. |
| 95 | S&F PVC (SWR) pipes 110mm dia in any length with rubber ring joint fixed to wall/floor height complete all as specified and directed. |
| 96 | S&F in repair PVC (SWR) bends 110mm dia, in any radius, complete all as specified and directed. |
| 97 | All as per Srl item No 09 bove but except bricks (reused old bricks) |
| 98 | M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 99 | M&L for repairing of RCC projections, chajjas, roofs, facia etc. by necessary preparations i.e. scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:2:4) (using 12.5mm graded crushed stone aggregate) and finished with cement sand mortar (1:3) using coarse sand in patches area n.exc 5 Sqm each and thickness of RCC member exc 50mm including applying two coats of Finishes to match with the existing surfaces in at any height complete all as specified. Note: - Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the Contractor. |
| 100 | S&F in repair stack clamps (110 mm pipe) out of 20 mm by 1.5 mm galvanised mild steel incl stays, bolt and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 101 | S&F of rolled mild steel Gde Fe-410-W Gde E-250 Quality-A in roof trusses (framed), trussed, purlins crane gantries, joist, channel, steel tube, rails & fastenings & heavy brackets framimg (beam, tee, angle, coulmn, gusset plates, channel, hollow square/rectangular or flat section) including distance pieces, cleats with riveted, bolted or welded attachment etc complete all as specified and directed by Engr-In-Charge. |
| 102 | M&L for 60 mm thick PCC (M-35) factory made (machine pressed ) with gray cement and no pigment interlocking tiles/ paver block of shape/ size as conforming to IS 15658-2006 joints will be filled with fine sand, complete all as specified and as directed by Engr-in-Charge. Note:- Sand will be paid under relavent item. |
| 103 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 104 | E/M PORTION Taking down carefully aluminium/ copper point wiring for light, fan, bell, socket of point complete fiitings such as switches, ceiling roses, pendents, regulator socket etc complete at site and making goods disturbed surfaces of walls, floors etc complete all as specified and directed. |
| 105 | M&L for point wiring with PVC insulated and PVC unsheathed single core multistranded FRLSH copper conductor cable of size 1.5 Sqmm (nominal area) using approved colour coding, 1100 volts grade, ISI marked, including PVC conduit heavy grade, 20 mm or higher dia with fittings concealed in wall/ on surface for ceiling with continuous earth wire of PVC insulated and PVC unsheathed single core multistranded FRLSH copper conductor cable of size 1.5 Sqmm (nominal area) 1100 volts grade, ISI marked and connecting to the common earth dolly including provn of 3mm thick plastic laminated sheet of appropriate size and sunken CI/ pressed steel terminal boxes for mounting switches, sockets and regulators etc including cutting chases and making good to the disturbed surfaces as per existing specifications for One light point/fan point/ bell point controlled by one, one way modular switch complete all as specified and directed. |
| 106 | All as per Srl item No 105 here-in-before but one 5 amp modular socket outlet on independent board. |
| 107 | All as per Srl item No 105 here-in-before but one 5 pin modular socket outlet 5 amp on same board. |
| 108 | All as per Srl item No.105 here-in-before but one light point controlled by two way modular switches. |
| 109 | All as per Srl item No. 105 here-in-before but wiring with 2.5 sqmm FRLSH copper wire including earth wire 2.5 Sqmm of copper for 15 Amps 3 pin socket outlet. |
| 110 | S&F PVC insulated sheathed copper wire 1.5 Sqmm FRLSH subgke cire 1100 volt for inverter connection in same conduit complete all as specified and directed. Please Enable Macros to View BoQ information |
| 111 | S&F PVC insulated sheathed copper wire 1.5 Sqmm FRLSH subgke cire 1100 volt for inverter connection in same conduit complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender