Tender For Special Repair To Various Swts And Water Tank (Tfc,2Sd And Laundary) Of 2 Fod And Provision Of Reception Area With Closed Vicinity, Furniture, Cabinets And Lead Door In The (Cone Beam Computedtomography) Room Of 15 Corps Dental Unit At Bb Cantt
Tender Value
18.55 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
19 days left
EMD
37100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Various Swts And Water Tank (Tfc,2Sd And Laundary) Of 2 Fod And Provision Of Reception Area With Closed Vicinity, Furniture, Cabinets And Lead Door In The (Cone Beam Computedtomography) Room Of 15 Corps Dental Unit At Bb Cantt, Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 2 | Taking down cement plaster and removing the debries out side MoD land, complete all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 4 | M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, complete all as specified and directed. |
| 5 | M & L for formwork to soffits of suspended slabs such as roof slab, floor slab and similar work not exc 200mm thick, complete all as specified and directed. |
| 6 | M/L TMT steel bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 7 | Material and labour for two coat plaster 15 mm thick (10 mm +Layer of Wiremesh+ 5 mm) on wall surfaces in cm 1:3 with liquid water proofing compound (as per manufacturer’s instructions) mixed in both coats, finished even and smooth without using extra cement including necessary scaffolding if required and coving to be provided at any wall to wall / wall to floor junctions, complete all as specified and directed.Note:- WPC & wiremesh shall be measured and paid separately. |
| 8 | Material and labour for Chicken wire mesh galvanised steel wire 0.91 mm dia fixed with tinned tacks or wire staples and size of mesh 20 mmx 20 mm, complete all as specified and directed. |
| 9 | Supply only integral water proofing compound, complete all as specified and directed. |
| 10 | M & L for high quality elastomeric cementitious coating treatment for tank water proofing & protection using FOSROC Nitocote CM 210 compound by the following method complete all as specified and directed:-a) Plastered surface shall be wire brushed & vaccum cleaned thoroughly and made free from dust, oil, grease / wax componentsb) Pre-wetting /Mixing/ Applictaion : Technical specifications, mixing & application of water proofing compound shall be as per the manufacturer instructions provided by M/s FOSROC India Pvt Ltd in respect of Nitocote CM 210 or equilant as approved by GE.c) Testing : The tank shall be filled with water for atleast 72 hrs to observe for water loss, if any loss is observed the coating shall be repeated. Note : All procedures shall follow strictly the mfr product data sheet and application procedures |
| 11 | M&L for plain cement concrete type C-1 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints every 2.5m and corner filled with bitumen 85/25, complete all as specified and directed. |
| 12 | S&F for framed brackets of angles or tees with web and flanges, tubular pipes cut to shape,drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., conforming to Fe.290.Gde-E-165 incl Dismantling wrought iron or mild steel work of any description, complete all as specified and directed. |
| 13 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 14 | M&L plain cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregate) as in copings and the likes including necessary form work, complete all as specified and directed. |
| 15 | M & L for 20-25 mm thick machine cut Pre polished Kota stone slab flooring, Landing,steps over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry @3Kg/sqm mixed with pigment to match with shade of slab including rubbing and mirror polishing complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified |
| 16 | M&L for 2nd class soft wood Wrought scantlings as in Timber framed work and fixed as in Almiraha, Table, Cabinets etc fixed with nails and grooves etc, complete all as specified and directed. |
| 17 | S&F Veenered decorative plywood 12mm thick grade I (withBWR resign)fixed with screws to timber frame including cutting,joiting fixing with screws as in almirah, cabinets etc box type, complete all as specified and directed. |
| 18 | S&F 18mm thick grade BWP type BB fixed with screws to timber frame including cutting,joiting fixing with screws as in almirah, cabinets etc box type, complete all as specified and directed. |
| 19 | M&L for 2nd class soft wood of deodar decorative moulding type ,fillets (bullnosed , splayed, chamfered or rounded on one edge or face ) square, rectangular or triangular in section (sectional area exc 3 sqcm & n.exc 6 Sqcm), secured with nails or brads over ply work complete all as approved and directed. |
| 20 | S & F brass barrel tower bolt of extruded section 100mm long, ISI marked, complete all as specified and directed. |
| 21 | S & F 100 mm long, extruded brass handles, fabricated type, complete all as specified and directed. |
| 22 | S&F 30mm continous (piano ) brass hinges of good quality bright fninsh complete all as specified and directed. |
| 23 | Supplied and fixed for Magnetic Ball catches standard type with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 24 | S&F teak wood beading of size 20mmx6mm on the exposed /edges surfaces of the ply wood, complete all as specified and as directed. |
| 25 | S&F Railing channels for running drawer of length not exceeding 0.60 mtr fixing with screws complete all as specified and directed. |
| 26 | S&F 12mm thick Toughned glass as on Table Top including cutting,grinding the edges, complete all as specified and directed. |
| 27 | S&F 75mm Harrison Brass Mortice lock, 4 lvers fixed as in cubboards and drawers etc., complete all as specified and directed. |
| 28 | S&F 50mm Brass Locks ( 4 levers) grade-I, for drawer, complete all all as specified and directed |
| 29 | S&F Drawer pulls, Brass 4 screw plate with fixed dished pull 80mm to 100 mm, complete all as specified and directed |
| 30 | S&F knout free pre polished 10-12mm thick 1st class softwood wooden(Australian) panelling fixed with tounged and grouted in a wall panelling and including fillets/cornices over and including 9mm thick ply wood fixing on wall , sneezing etc., complete all all as specified and directed Note : (i) Diconnecting of electrical connections from main DB and removing all switch accessories including switch so ket, sheet metal enclosures of all E/M nature (Fittings & Fixtures). (ii) Connecting and refixing of all electrical connections from main DB and fixing of switch accessories such as switch socket, sheet metal enclosure of all E/M nature (Fittings& Fixtures) |
| 31 | Material and labour for Teak wood beading 5mm thick and 25mm wide, of fancy type fixed to board/ply of any description complete, all as specified and directed. |
| 32 | S&F Dental X Ray SD-Pb-01 Sigle shutter Lead Lined Radition shileding door 45mm thick with 2mm thick lead plates with solid core suitable metal door frame with condinous lead lining equivalent to required shielding lead sheet to cover the complete door leaf , including necessary over laps at edges) including Jamb shielding with lead lining/over lap arrangmegement to prevent radiation leackage around the perimeter fixed with heavy duty steel hinges 100mm long minimum 04 Nos including heavy duty mortise lock suitable for lead lined door, 2 Nos 200mm long steel handle and finished as laminate & manual inward/outward openingas required by room katout and including heavt duty brass hydraulick door closer, complete al as specified and directed. |
| 33 | M&L french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and directed. |
| 34 | S&F stainless steel flats hold fast including driling of holes for fixing of hold fast for cabinets to be supported/hanged/fixed with fastnut/nuts and volts, complete all as specifed and directed. |
| 35 | S&F an inscribed emblem/Dental corps sign Board etc over and including 10mm thick toughened glass of size 0.80x1.20 mtr fixed with 4 Nos stainless Nut & volts, complete all as specified and directed |
| 36 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of red colour having tensile strength 550 Mpa as in roof covering for making +(PLUS) sign over Steel roof G+2 Storey bldg fixed with self tapping screws including fixing of Wind Tie flat iron 50x5mm thick all around the border and cross of (PLUS) Sign including painting wind tie with synthetic paint red colour and fixing the same over existing roof covering with self taping screw/secruing by welding etc., complete all as specireid and directed. |
| 37 | M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system concealed or on surface wall with the help of heavy duty ISI mark PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc complete all as specified and directed for the following:- |
| 38 | One light point / fan/bell/exhaust fan point wiring system controlled by one way switch , complete all as specified and directed. |
| 39 | One 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch, complete all as specified and directed. |
| 40 | One 5 Amp socket outlet point wiring system fixed on same board & controlled by one way switch, complete all as specified and directed. |
| 41 | Description all as per serial item No 37 here-in-before, but using PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring system and also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductor wire used as a continuous earth wire for power point wiring system , complete all as specified and directed. |
| 42 | Supply and fixing of modular type switch 5/6 Amps 220 Volts AC,one module , complete all as specified and directed. |
| 43 | Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC, 3/5 multi pin type with two modular, complete all as specified and directed. |
| 44 | Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module , complete all as specified and as directed. |
| 45 | Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed. |
| 46 | Supply and fixing ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed. |
| 47 | Supply and fixing of one/two modular type step type electronic fan regulator with having hum free step alongwith speed control know, complete all as specified and directed. |
| 48 | S&F star rated electric ceiling fan 1200mm sweep min air delivery 210 CFM with service value 6.0 BEE norms 5 star rating with bruhless direct current motor (BLDC) of single phase 230 volt AC alongwith blade, down rod, canopy, clamps with reel insulator, electronic regulator & accessories and MS fan hook fixed in ceiling/roof including providig flate flexible copper wire and making all electrical connection, complete all as specified and directed. |
| 49 | Supply and fixing recessed/ceiling concealed/surface mounted down lighter light fitting of round/Square flate shapes decorative type with high efficiency PMMA fiffuser soft glare free light with drivers & LED luminaire of rating capacity in 7 to 9 Watt 220 volt AC complete light fitting set all as per existing fitting type/ size of sample /model and make and including making in cutting or additional extra corner cutting work on existing hole of ceiling surface (when if required at site) for setting & fixing of new light fitting complete including making in additional extra corner cutting work on existing hole of ceiling surface and connection of light, complete all as specified and directed. |
| 50 | S & F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangment system suitable of rating of size/type of distribution board SPN 4 way type 220 volt AC supply system with IP-43 protection system and having mounting chanel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and duly fixed surface on wall or conceled in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as specified and as directed. |
| 51 | S&F MCB SPN 40 to 63 Amp, 240 Volts, with breaking capacity 10 kA rupturing capacity, 'C' series 50 HZ AC supply and also making suitable size/type of electric wiring connection, complete all as specified and directed. |
| 52 | S&F MCB SP 06 to 32 Amp, 240 Volt, 10 kA rupturing capacity 'C' series 50 HZ AC supply and also making suitable size/type of electric wiring connection complete all as specified and directed. |
| 53 | Supply and fixing of Sub main wiring system with two runs PVC insulated FRLS wire,1100 volt grade with multistranded copper conductor wire of size 3 Run of 4 Sqmm and 1 Run of 4 Sqmm (Nominal area) (ISI Marked) any type any length drawn through in heavy duty ISI mark PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old unservicable sub main wiring system complete and making good all disturbed surfaces match to the existing surface, complete all as specified and directed. Note: 3 runs of 4 sqmm cable and one run of conduit/ casing capping shall be measured and paid as one unit. |
| 54 | Notes :-An amount of Rs 33,200.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender