Tender For Provn Of Plinth/Hardstanding For Radars At Various Mof Op Locations In Ladakh
Tender Overview
Project Description
Tender for Provn Of Plinth/Hardstanding For Radars At Various Mof Op Locations In Ladakh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Oct-2026 | corr1 | BOQ | 19-Nov-2026 |
| 2 | 19-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating over areas, n exc 1.5 m deep and getting out and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 2 | Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge. |
| 3 | Removing excavated material to a distance exc 250m but not exc 500m and depositing where directed at a level not exceeding 1.5 mtr above the starting points, complete all as per specified and as directed complete all as specified and directed by Engr-in-Charge. |
| 4 | Rolling and consolidating formation surfaces in cutting/filling to camber by using earth compactor or power road roller of capacity exc 8 tonne and n exc 12 tonne including watering, levelling etc. complete all as specified and directed by Engr-in-Charge. |
| 5 | Laying and compacting 250 mm thick (compacted thickness) Granular Sub Base Course(GSB) grading as per Grade II as specified M&L for Table 400-12 of MORTH specification for road and bridge works, 2013, in a single layer over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag, or combination thereof as per the grading required. The materials are mechanically mixed, spread and levelling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-100 KN static wight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerance as per Table 900-1 of MoRTH specifications for Road and Bridge works, 2013 specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 6 | Laying and compacting 250 mm thick (compacted thickness) Granular Sub Base Course(GSB) grading as per Grade II as specified M&L for Table 400-12 of MORTH specification for road and bridge works, 2013, in a single layer over compacted subgrade with natural sand, crushed gravel, crushed stone, crushed slag, or combination thereof as per the grading required. The materials are mechanically mixed, spread and levelling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-100 KN static wight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerance as per Table 900-1 of MoRTH specifications for Road and Bridge works, 2013 specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender