Defence Statutory Bodies & Commissions/Committees Closing in 3 days TDR #58254782

Tender For Periodical Maintenance To Dgrr Mess And Office At Pratap Chowk And Rpso Complex In The Area Of Age B/R-I Under Ge (East) Delhi Cantt-10

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
24.26 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
48540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Periodical Maintenance To Dgrr Mess And Office At Pratap Chowk And Rpso Complex In The Area Of Age B/R-I Under Ge (East) Delhi Cantt-10

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 18-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 25-Nov-2026

BOQ

Name of Work:- PERIODICAL MAINT TO DGRR MESS AND OFFICE AT PRATAP CHOWK AND RPSO COMPLEX IN THE AREA OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10
Sl. No. Item Description
1M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radius built in CM 1:6 including demolition of Brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified.
2Taking down cement or cement lime plaster, any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.
3M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair incl scaffolding etc, complete all as specified and as directed.
4M & L for 12mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and fair incl scaffolding etc, complete all as specified.
5M & L for 5mm thick rendering in cement mortar 1:3 on ceiling, finished even and fair incl scaffolding etc, complete all as specified.
6M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.
7M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) of size 300mmx300mm or 400mmx400mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
8M & L for glazed ceramic tiles in vertical surface of size 300mmx450mm or 300mmx600mm and 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick rendering/ backing coat in CM 1:4 after dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), complete all as specified and as directed.
9M & L for 16-18 mm thick granite of any type work table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and like in over and incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab, notching and moulding and dismantling of existing granite complete all as specified and as directed .
10M & L for Vitrified coloured tiles dark shade 8-10mm thick (square/rectangular) polished, area of each tile exc 0.42 sqm but not exc 1.00 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4, after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
11Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each including iron mangory complete all as specified and as directed.
12Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each including iron mangory complete all as specified and as directed.
13S & F for Factory made UPVC (white/Off White colour casement (Openable) Door made of extruded profile members with wall thickness of 2.3mm (+0.2mm). Door profile members with hollow section with multi chamber. Frame (60mm x 60mm), sash bars (60mm x 110mm). T-profile (One vertical length in between two shutters 60mmx 74mm). Glazing head (35mmx 20mm) will be mitred cut and fusion welded at all corners, including making of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM gasket 1.2 to 0.02mm thick galvanised steel frame (28mmx21.50mm), sash bars (31mmx27mm). T-profile (27x17mm) to be inserted in required profile frame and will be fixed to wall 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloy (white powder coated), Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with striker, Hinges of zinc alloy (white powder coated) and 5mm thick glazing with selected quality glass, complete all as specified and as directed. (Note:The unit rate quoted by contractor includes cost of glass, hydraulic door closure, lock and includes all other connected accessories. Net opening will be measured for payment purpose.)
14S & F for Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (+0.2mm). Window profile with hollow section with multi chamber frame (108mm x 48mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1+0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selected quality glass, Aluminium track on bottom rail to be of three track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. (Note: The unit rate quoted by contractor includes cost of glass, SS wire mesh and includes all other connected accessories. Net opening will be measured for payment purpose.)
15S & F for Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 2mm in vertical and horizontal members and glazed with 5mm thick tinted glass and 12mm thick pre-laminated particle board interior grade with laminations on both faces according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement including dismantling of existing partition of any type complete.
16S & F plain gypsum board panel 12 mm thick on false ceiling (including any design/ cob design as required & pattern as approved by GE) with and including necessary GI frame work for seamless ceiling used with 'T', channel or any section including screws, cleats, fasteners, clips and all required accessories, hangers etc. of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including two coats of OBD over a coat of putty including dismantling of walls and celling existing old board (fibre pulp. Insulation etc. or insulation boards/slabs/blanks any thickness including cover fillets etc, complete all as specified and directed.
17M&L 4mm thick designer board false ceiling e-board (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instruction and including dismantling of walls and celling existing old board (fibre pulp. Insulation etc.) or insulation boards/slabs/blanks any thickness including cover fillets, any type of frame etc, complete all as specified and directed.
18S & F in repairs Vitreous china single Piece floor mounted WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm including connection to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. SLS-WHT-6851S300PP or equivalent in Marc / Kohler)
19S & F in repairs 15mm Angle valve of CP any colour high pressure screwed for iron pipe and fixed, complete all as specified and as directed.
20S & F in repairs 15mm Stop valve/ angle valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms)
21S & F in repairs Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
22S & F in repairs ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. Make : Hindware - Cat Part No. 70089 or 70084/ Make : Kohler : Cat Part No. K-31602IN-E63 or equivalent.
23S&F in repair Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shank and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions complete all as specified and directed (Make : Jaquar/Marc/Kohler).
24S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
25S&F in repair Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
26S&F in repair 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc. all as specified and directed.
27S & F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx 160mm all as specified and directed.
28S & F in repair Fancy type sink mixer for mixing hot and cold water with swinging port, screwed for iron pipe,15mm bore complete all as specified and as directed. (Make : Jaquar/ Marc/ Kohler)
29S & F in repair Designer type high quality fancy type looking mirror of size exc 1.00 Sqm but not exc 1.5 sqm as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.
30S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, (ISI marked) double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut, tank nipple of suitable size complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
31Description all as per srl item No 30 here-in-before but of 500 ltr capacity.
32S & F factory made WPC railing combining WPC board/Fancy designer type grating and WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2' to 2.5' height, comprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, 18mm thick WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm manufactured by \\"RAJSHRI\\" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge), Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3\\"x3\\" GI 'L' or SS cleats to support vertical frame lengths including demolition /dismantling of existing RCC jallies with frames complete all as specified and as directed. (Make : Rajshree or equivalent as approved by GE) (Note : The said item shall be fixed over boundary walls/roof tops and in any other positions as per requirement at site)
33S & F for PVC hollow wall panelling 7 to 8 mm thick wood grain teak finished pre-laminated inclusive of fixing to wall incl moulding end caps fixed with PVC sleeves and screws as required at site including taking down existing panelling of any type complete all as specified and as directed.
34M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed.
35Description all as per srl item No 34 here-in-before but single coat over previously treated wall or ceiling.
36M & L for Preparation of newly plastered /unplaster surfaces of walls and ceilings and applying two coats of Oil Bound Distemper on wall surfaces over a coat of primer and 1.5-2mm thick wall care putty ,complete all as specified and directed.
37M & L for Preparation of Old treated /unplaster surfaces of walls and ceilings and applying one coats of Oil Bound Distemper on wall surfaces,complete all as specified and directed.
38M & L for Mild steel rolled sections Fe-410-W (Gde-E-250) quality B as in Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete all as specified and as directed.
39Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
40S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plain or corrugated AC Sheet complete all as specified and as directed.
41S & F painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing corrugated or semi corrugated AC Sheet, Nainital or similar pattern as in roof coverings complete all as specified and as directed.
42Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.
43M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded aggregate) as in sub base of flooring or in any position complete all as specified and as directed.
44M & L for rubber moulded Coloured Chequered cement concrete tiles 30cm x 30cm and 20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6 etc including dismantling of existing chequered tiles of any type complete all as specified and as directed.
45S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592 of any shape and size as per requirement at site and as directed including demolition of existing manhole covers of any type complete all as specified and as directed.
46M & L in repair for Stainless Steel work of Grade-304 as in vertical post/pole, trusses of any type and size including special shaped washers, channels, plates (horizontal/ vertical/ cantilever type work) also ornamental works like designer railing chain, lattoo any type and size as approved by GE and as reqd at site made of hollow tubes or in any other shape as per requirement at site, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary nuts and bolts dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. (Note :- No extra payment shall be made to the contractor for ornamental works of this item).
47S & F for 2mm thick colour coated polycarbonate roofing sheet translucent plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall, gate etc including taking down old UNSV fibre sheet of any type complete all as specified and as directed.
48S&F Aluminium alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick pre-laminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.
49S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
50S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
51S & F Factory Made Solid PVC Moulded Door Shutters with wood free EPS, 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
52S & F Factory Made Solid PVC Door Shutters, 28 to 30 mm thick (stile:), panel design with 10mm thick PVC Sheet , supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
53S & F in repair 15mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc. incl scaffolding, cutting chases in wall where ever required etc complete, all as specified.
54S & F in repair 20mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc incl scaffolding, cutting chases in wall where ever required etc complete, all as specified.
55S & F in repair bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete. (Make: Jaquar/Marc/Kohler)
56S & F in repair for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.
57S & F in repair 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
58S & F Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including dismantling of existing WC and making good to floor all as specified and directed.
59S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap with connection to drain and flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.
60Supply and fixing PVC valveless syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend,PVC connection 15 mm 600 mm long for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified & directed.
61S&F Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixed in repairs, complete all as specified.
62S&F Vitreous China bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixed in repairs, complete all as specified and as directed.
63S&F shower panel 1600x200mm stainless steel complete all as specified & directed. Make :- Jaquar Cat No SHP-SSF-ST88158B or equivalent in MARC/Kohler
64Providing and laying 60mm thick factory made prepolished chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.
65M & L for PCC (1:2:4) Type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating,
66S & F in repair Brass chromium plated bottle traps 40mm bore for wash basins/ sink/ urinals with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.
67S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
68S & F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position complete all as specified and directed.
69S & F PVC (SWR) 110mm bore bends with access door, complete all as specified and directed.
70Descritpion all as item no 68 above but 75mm bore complete.
71Descritpion all as item no 69 above but 75mm bore complete.
72S & F Mild Steel Steel work in tubular poles/trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete.
73S&F Aluminium alloy powder coated windows including aluminium powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double rebated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/ frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.
74M & L for preparation of plastered, unplaster or pointing surfaces old decorated/un-decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of cement base paint of any tint all as per manufacturers instructions to achive desired finish at any height complete all as directed.
75S&F 0.05mm thick sun control film having 50% visible light transmittance on glass surface of any colour / shade including preparation of surface complete all as specified and directed. Make -(3M or equivalent)
76M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 grey cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern (groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove) complete including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete.
77M&L for APP based polymeric membrane with mineral granules on top surface, minimum weighting 3 kg/Sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm with bitumen primer and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.6 kg/sqm at overlapping joints with a over lap of 75mm at the sides and 100 at the ends complete all as specified including taking down existing roof treatment of any description. Note: the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.” Make- Asian/ STP/ IWL Notes-1. The Work Shall be executed through authorized applicator of manufacturer2. Authorized applicator shall be approved by GE before starting of work3. All material shall be procured directly
78S&F 100mm size stainless steel butt hinges fixing with screws to door frame complete all as specified.
79S&F aluminium Anodised 150mm size barrel tower bolt complete all as specified and as directed.
80S&F 150mm size aluminium anodised handles complete all as specified and as directed.
81S&F 300 mm long stainless steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
82S & F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140mm complete all as specified and directed.
83S & F in repair 150mm long mild steel barrel tower bolts Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and as directed.
84S & F 3mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed including hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed
85S & F 5.5mm thick sheet glass, ordinary quality and glazing with wooden beading exc 0.5 Sqm in each pane all as specified and directed including hacking out old broken glass (any thickness, size, quality or description) from aluminium or steel frame glazed with putty or fixed with rubber /beads complete all as specified and directed
86S & F in repairs Urinal spreader of CP any colour for fixing with 15mm dia pipe complete all as specified.
87S & F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed to doors and widows with necessary 12mm iron flats with welding and including dismantling of old wire cloth complete all as specified and directed. (Note :- Rates are inclusive of welding and supply of flats including reqd nut bolts wherever required)
88M&L for easing of UPVC door shutter including repair/replacement of hinges as required complete
89S&F in repair muilty lever lock for UPVC door shutter complete all as specified and directed.
90S & F in reapir flushing cistern kit of any type complete all as specified and directed
91S & F in reapir flushing cistern handle complete all as specified and directed
92S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make: Jaquar/ Marc/ Kohler)
93S&F in repair stainless steel grating 125mm dia with centre hole of best quality as approved by GE including fixing in CM 1:4 to floor/nahani traps etc complete all as specified and directed.
94M & L for coloured glazed wall cladding tiles of size overall area exc 0.11 Sqm but not exc. 0.18 Sqm of 8-10mm thick on vertical surfaces of wall over 10mm thick rendering in cement mortar 1:4 all as per sample approved by Engr-in-charge or GE complete all as specified and as directed. Please Enable Macros to View BoQ information
95M & L for coloured glazed wall cladding tiles of size overall area exc 0.11 Sqm but not exc. 0.18 Sqm of 8-10mm thick on vertical surfaces of wall over 10mm thick rendering in cement mortar 1:4 all as per sample approved by Engr-in-charge or GE complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58254782
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 24.26 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Periodical Maintenance To Dgrr Mess And Office At Pratap Chowk And Rpso Complex In The Area Of Age B/R-I Under Ge (East) Delhi Cantt-10
Basic Detail
Tender No GE/DE-194/2026-27
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 18 Nov 2026
Submission Date 25 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 24.26 Lakhs
Tender Fee 500
EMD 48540
Exemption Available
Document List
af1d2b41-724f-4f1e-93ec-157123f9a641.html
BOQ_892970.xls
Tender194.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 3 days
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

af1d2b41-724f-4f1e-93ec-157123f9a641.html

xls

BOQ_892970.xls

pdf

Tender194.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender