Tender For Cleaning To Sewage Line, Manhole And Certain Repair/ Maintenance To Drains, Sewage Line, Manholes, Approach Path, Boundary Wall, Grit Plaster And Other Misc Maintenance To Offrs Md Accn And Otm At Comd Huts, Messes,, Mes Ib, Harbaksh Stadi
Tender Value
45 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
15 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cleaning To Sewage Line, Manhole And Certain Repair/ Maintenance To Drains, Sewage Line, Manholes, Approach Path, Boundary Wall, Grit Plaster And Other Misc Maintenance To Offrs Md Accn And Otm At Comd Huts, Messes,, Mes Ib, Harbaksh Stadium, Rpso Complex, Triveni, Taurus Csd At Mandir Marg, Tigris Road, Parade Road, Arun Khetarpal Marg In The Area Of Age B/R-I Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning of blocked WC up to first manhole and making the drain pipe of any dia fully functional by flushing with water to entire satisfaction of Engr-in-Charge including disposal of sludge outside the periphery of defence land at his own arrangement where sanitary hazards do not take place as per directions/ instructions of civil authority and burried in excavated pits all as specified and directed. Note:- Unit rate quoted by tenderer shall include clearing blockage, taking out sludge(liquid/semi liquid/solid), excavation of borrow pits for dumping sludge, removing including loading/unloading and transportation etc. |
| 2 | Demolition and breaking up 150 mm dia drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar, complete all as specified and as directed. |
| 3 | Excavation in trenches not exc 1.5m wide and not exceeding 1.5 mtr in depth for foundation etc shaft, cesspits, manholes sewage line etc not exc. 10 Sqm on plan and getting out complete all as specified and directed. |
| 4 | Returning, filling in, trenches with soil in layers not exc 25 cm thick, watering and well ramming complete all as specified and directed. |
| 5 | Removal of surplus soil to a distance not exc 50 mtr away & deposting where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 6 | M&L for PCC 1:4:8 type D-2(using 40mm graded crushed stone aggregates) bedding for sewage lines of 150mm dia incl packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 7 | S&F DWCPE (SN8) nominal size 150 mm (internal dia) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed. |
| 8 | Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and as directed. |
| 9 | Cleaning of sewage system including WCs, WHB, bottle traps, nahani and floor traps, soil/ waste/ rain/drain pipe running on external walls/cancealed type of building including junctions, manholes of any description and sewage lines of all sizes upto the final drop out let into septic tank/soak well of central sewage/drain wihtout distrubing its running/flowing and removing all type of blockages in any situation by mechanical means, and disposing waste materials out side defence land strictly as per Hon'ble Supreme Court directions, complete all as specified and as directed by the Engineer-in-Charge. NOTE: a) The above task shall be caried out by deploying 04 safaiwalas for Offrs Md Accn , Messes/MES IBs / Command Huts / Central ammonites at Mall road, Polo road, Parade road,CPG, HQDA, Mandir marg, Tigris road, Church road, and other minor units. b) Where there is requirement of work involving scaffoldings and jhula, Contractor shall deploy the additional skilled team of workers expert in working on jhullas in high rise bldgs. c) If contractor fails to attend/clean a given complaint (received on any working days till 6 PM) on the same day, is liable to be charged damage Rs 500/- per day per complaint. Recovery for same will be deducted from his payment. d) One mechanical pump diesel/petrol for dewatering sludge water, safety belt, ladder, gloves gasmask, bucket to remove sludge, mechnical device required to reach work at difficult locations upto 9 stories shall be made available all time at site. |
| 10 | M & L for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in surface channels and drains all as specified and directed. |
| 11 | Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement including forms, moulds mitred/stopped ends etc. complete all as specified and directed. |
| 12 | Demolition of brickwork built in cement mortar/cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 13 | M & L for Brick work with sub class ‘B’ old Size bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed. |
| 14 | Description all as per above item No 13.00 here -in-before but except bricks, complete all as specified and as directed. |
| 15 | S&F of RCC precast concrete post (M-30) of sixze 150mm X 150 mm X 2435mm height having two grooves of size 50 X 30mm, so as to receive 6 nos. including provn of 6 nos of pre cast rcc panels between two post of size 1500mm X 300mm X40mm thickness the post isreinforced with 4 nos ,8mm dia tor bars with 4mm dia stir-ups @1.615m center to centre 150mm c/c; panels are reinforced with 3 nos longnitudinal bar of 8mm dia tor steel & 6mm plain M.s stir ups @ 150mm c/c. manufacture by M-30 graded of concrete complete all as specified as directed. Note:- (a) above ground level height will be measured for payment purpose.(b) The post may be fixed to the ground by digging a hole of 500 X 500 X 600m and filled with 1:3:6 concrete after the post has been aligned in these holes. The post will be erected 2 1.615 m center to center. Including distamntling of old posts abd struts. as specified and directed by Engr-in-charge. Make: kreative concrete company or equilent as approved by GE. |
| 16 | Taking down cement or cement lime plaster, grit plaster any description on brick or stone or RCC walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 17 | M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair without using extra cement in any position incl scafolding as required etc, complete all as specified and as directed. |
| 18 | PCC (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in brenching for manholes, bands, coping, bed plate etc with slightly chamfered or rounded angles including necessary from work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified & directed. |
| 19 | M & L for preparation of new surface decorated brick/concrete/ plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint complete all as specified and directed. |
| 20 | M & L for preparation of old surface decorated brick/concrete/ plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint complete all as specified and directed. |
| 21 | M & L for preparation of old external surfaces of walls, pillars, cornices etc by scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots and including filling cracks/holes in the surface with white putty and scrapped surface area to obtain smooth finishing as required and applying one coats of weather proof exterior acrylic emulsion paint premium quality over a coat of primer, complete all as specified and directed. |
| 22 | M & L for Washed stone grit plaster on exterior walls in two layers ( any colour and design as approved by GE), under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15 mm white cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 stone (white) chipping 10mm nominal size) in panels with groove all around as per approved pattern including Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer -in -Chargescrubbing and washing, the top layer with brushes and water to expose the stone chippings icomplete all as specified and directed. |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 24 | S & F Mild Steel framed work such as in Ornamenal gate, door frame, door shuters / gate of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified. |
| 25 | S& F Mild Steel work in rafter, purlin and other connected work including special shaped washer, nut bolt and plates etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 |
| 26 | M&L two coats of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified. |
| 27 | M & L for 18/20 mm thick granite (of any type) work( table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 10 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed. |
| 28 | M&L for 20 mm thick granite (of any type) work (table rubbed and polished) as in vertical surfaces such as skirting and dado etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 15 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 29 | Dismantling posts or struts (wood, steel or RCC) any section, incl taking out embedded portion & making good disturbed ground,post embedded in concrete, brick work, masonary etc. |
| 30 | M&L for PCC (1:3:6) type D-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified & directed |
| 31 | S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated AC sheeting any gauge thickness as in roof covering, complete all as specified and as directed. |
| 32 | S & F for 2 mm thick fibre glass reinforced translucent corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or crancked hook bolts including dismantling of of existing sheeting of any type, complete all as specified and directed. |
| 33 | M&L for Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc 15 cm thick (below or above ground level) including removal debris complete all as specified and as directed. |
| 34 | M&L for 75mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing completed all as specified and directed. |
| 35 | M & L for Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-40 Grade laid dry in floor/path complete all as specified and as directed. |
| 36 | M&L for 25mm thick Sand filling under floors or in foundations including watering and consolidation etc complete all as specified and directed. |
| 37 | M&L for chequered cement concrete tiles with mixture of white and grey cement in equal proportion and no pigments of size 30cmx30cmx25 mm thick, set, jointed and pointed in neat cement surry in floors including 20mm thick screed bed in CM 1:6 for laying floor tiles complete all as specified and diected. |
| 38 | M&L for out door coloured ceramic heavy duty tiles 10 to 15 mm thick (square/rectangle) area of each tiles not exc 0.16 sqm in floors etc set, jointed and pointed in white or coloured to match over and including 15mm thick screed bed in CM 1:6 complete tiles as specified and diected. |
| 39 | Providing and fixing \\"RAJSHRI\\" Brand factory or equivalent made WPC railing combining WPC board 18 mm thick Fancy designer type grating and including WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2' to 2.5' height , comprising of virgin PVC resin of K value 58-60 (Suspension Grade) , Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm manufactured by \\"RAJSHRI\\" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge) , Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with inclWPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3\\"x3\\" GI 'L' or SS cleats to support vertical frame lengths including taking down exisitng RCC Jali complete all as specified and as directed incluidng taking down exisitng RCC Jali (Make : Rajshree or equivalent) (Note : The said item shall be fixed for view cutter in any positions as requirement at site) |
| 40 | S & F HPL Sheet exterior glossy (colour & design as approved by GE) of 6mm thick joint with Silicon/ adhesive as per manufacturer instruction including necessary aluminium framed work as required shape and size by welding etc fixing to wall/ceiling/ Slabs/RCC column/ boarding/ Gates/ Name Plates on gates with necessary fixing arrangements upto a height of 10 Mtrs including dismantling of old HPL sheets complete all as specified and as directed. |
| 41 | M&L of factory made Fiberglass Reinforced Plastics (FRP) “CHAJJA” of “Fibreways” brand or equivalent 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos. vertically and 1 no. horizontally 50x2mm thick M.S. Flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete using silicon sealant from top and bottom to make it waterproof in one single piece casted monolithically including all necessary fittings complete all as specified and directed. The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fiberglass chopped strand mat (CSM) as per IS: 11551, complete with protective Gelcoat UV coating on top for complete resistance from the extreme of temperature, weather & sunlight complete all as specified and directed. Note: All fittings/fixtures including in above quote rates. |
| 42 | Disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land), for all leads and all lifts, complete all as specified and as directed by the Engineer-in-Charge.Notes:1. Photographic Evidence: The contractor shall submit clear photographic evidence in support of disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials, indicating the condition of the site before loading, during transportation and after unloading at the approved Municipal dumping ground. The photographs shall preferably be geo-tagged and date-stamped and shall form part of the record for verification and payment purposes. 2. Certification by Engineer-in-Charge: Completion of whole work in this BOQ shall be deemed to have been achieved only after certification by the Engineer-in-Charge that no building rubbish/malba, similar unserviceable, dismantled or waste materials have been left at the site and that the site has been thoroughly cleared and cleaned to his satisfaction. 3. Each load shall comprise a minimum carrying capacity of 5.00 cubic metres (Cum). Payment under this item shall be made on a per-load basis for loads conforming to the above minimum capacity and duly verified by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender