Tender For special Repair To Pump House And Power House At Gandhinagar Under Ge(Af) Chiloda
Tender Value
43.49 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
19 days left
EMD
86980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Pump House And Power House At Gandhinagar Under Ge(Af) Chiloda
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings ,complete all as specified. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for ,complete all as specified. |
| 3 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 ,complete all as specified. |
| 4 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,complete all as specified. |
| 5 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (Fe 410-W(Gde-E- 250) quality-A) ,complete all as specified. |
| 6 | S&F 2mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall ,complete all as specified. |
| 7 | S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screw complete all as specified. |
| 8 | S&F in repairs PVC (SWR) pipes 150mm bore single socketed in any length with rubber ring joints fixed to walls for rain water pipes,complete all as specified. |
| 9 | S&F in repairs PVC (SWR) bends any radius 110mm dia,complete all as specified. |
| 10 | Dismantling/removal of existing water proofing membrane, including of cement plaster of any description and any thickness and removal of material out of MOD land/sites etc complete all as specified. |
| 11 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level),complete all as specified. |
| 12 | M&L for PCC 1:2:4 type B1 (20mm graded aggregate) as in levelling course for slope correction of existing RCC roof surfaces including cleaning the roof surfaces and removing existing APP based membrane removing all foreign materials by wire brushes/ brooms/ water jet complete all as specified. |
| 13 | M&L for rendering in CM (1:3) 10mm thick over RCC roof, chajja/ brick wall mixed with water proofing compound @ 3% by weight of cement finished even and fair without using extra cement. Note - WPC shall be measured and paid separately,complete all as specified. |
| 14 | Supply only integral water proofing compound ,complete all as specified. |
| 15 | M&L for preapring clean and dried plaster surface and applying a coat of oil based bitumen primer confirming to (IS: 3384) at the rate of 0.30 litrs per Sqm and then laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with non woven polyster reinforced membrane having thermal insulation with mineral gravel on upper side of membrane land on primed surface by torch application method complete all as specified. |
| 16 | M&L ATT Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron ,complete all as specified. |
| 17 | M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors,complete all as specified. |
| 18 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar,complete all as specified and directed.. |
| 19 | Brick work with fly ash bricks (modular size bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 ,complete all as specified. |
| 20 | Taking down cement plaster on brick or PCC block masonry wall in any description,complete all as specified. |
| 21 | M&L for rendering 10mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement,complete all as specified. |
| 22 | M & L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even & fair without using extra cement work ,complete all as specified. |
| 23 | M&L for rendering to ceiling in 5mm thick on fair faces concrete surface in CM (1:3) finished even and smooth without using extra cement,complete all as specified. |
| 24 | M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered surfaces of wall ,complete all as specified. |
| 25 | All as per Item No: 24 but on ceiling, complete all as specified. |
| 26 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces,complete all as specified. |
| 27 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises,complete all as specified.. |
| 28 | Dismantling Stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons ,complete all as specified. |
| 29 | M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes ,complete all as specified. |
| 30 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls ,complete all as specified. |
| 31 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor ,complete all as specified. |
| 32 | All as per item no 31 above but on vertical surfaces/skirting ,complete all as specified. |
| 33 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified. |
| 34 | M&L for Glazed ceramic coloured tiles in vertical surfaces 300X450X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified. |
| 35 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified. |
| 36 | M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,complete all as specified. |
| 37 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ,complete all as specified. |
| 38 | S&F 12mm Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required with all fittings and solar control film 50 micron reflective type sticked to glass panes as per manufacture instruction,complete all as specified. |
| 39 | Disconnecting existing tanks, setting aside (or lowering if required) of capacity exc 500 Ltr n exc 1000ltr for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),complete all as specified. |
| 40 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of capacity exc 500 Ltr n exc 1000 Ltr capacity,complete all as specified. |
| 41 | S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets ,complete all as specified. |
| 42 | S&F in repair 32mm brass chromium plated waste coupling for wash hand basin ,complete all as specified. |
| 43 | S&F in repairs Pillar taps, fancy type cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe all as specified. (Minimum weight 0.665 Kg),complete all as specified. |
| 44 | S & F in repairs Bib taps fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe. (Minimum weight 0.575 Kg),complete all as specified... |
| 45 | S&F in repairs Stop valves fancy type cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for iron pipe or fo runions and fixed to15mm bore pipe complete all as specified. (Minimum weight 0.575 Kg),complete all as specified. |
| 46 | S & F in repairs Toilet paper holder with flat recessed type stainless steel ,complete all as specified. |
| 47 | Supply and fix in repairs 32 mm size waste pipe for wash hand basin / urinal / sink ,complete all as specified. |
| 48 | S&F 5.50 mm thick glass,looking mirror size exc 0.5 Sqm and not exc 3 Sqm of selected quality glass, mounted on 10 mm thick commercial ply wood with chromium plated brass screws/ Brackets including taking down old looking mirror complete all as specified. |
| 49 | S&F in repair Stainless steel sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 50 | S & F in repairs stainless steel Soap dish fixed to plugs with chromium plated brass screws,complete all as specified and directed.. |
| 51 | Demolition Cement concrete (unreinforced) Concrete of any description and in any position not otherwise specifically provided for,complete all as specified. |
| 52 | M&L for 75mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in floor finishes and pavings,complete all as specified. |
| 53 | M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all ,complete all as specified. |
| 54 | M & L Chequred cement concrete tiles 30cm x30cmx 25mm thick with grey cement and pigment , set jointed in neat cement slurry complete all as specified. |
| 55 | Demolition of stone slabs and tiles / paver block of any description or thickness in floors aprons etc laid bedded and pointed in any mortar,complete all as specified. |
| 56 | M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 grade ,complete all as specified. |
| 57 | All as per item no 56 above except tiles,complete all as specified. |
| 58 | M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 80mm thickness M-40 grade complete all as specified. |
| 59 | All as per item no 58 above except tiles,complete all as specified. |
| 60 | M& L factory made kerb stone of concrete C2 1:3:6 (25mm graded aggregate) cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever ,complete all as specified. |
| 61 | M&L for preparation of old painted surfaces of wall / concrete surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint ,complete all as specified. |
| 62 | M&L for preparation of new surfaces of wall / concrete surfaces over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer ,complete all as specified. |
| 63 | S & F in repair PVC connection 15 mm size with PTMT nuts on both end, length 450 mm, including taking down old PVC connection ,complete all as specified. |
| 64 | M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement ,complete all as specified. |
| 65 | S&F in repairs 15 mm CP Bib cock 2 way with wall flange and single knobs complete with all fittings ,complete all as specified and directed.. |
| 66 | S&F in repairs CP Overhead rain shower - ABS type Square 150x150mm ,complete all as specified and directed.. |
| 67 | S&F in repair Health Faucet ABS body mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position ,complete all as specified and directed.. |
| 68 | S&F in repair urinal spreader of chromium plated of any colour for fixing with 15 mm dia pipe ,complete all as specified and directed.. |
| 69 | Dismantling of ceiling board/false ceiling any Size and thickness , complete all as specified. |
| 70 | S&F Gypsum Board false ceiling tile (size 595x595mm) 12mm thick in false ceiling , complete all as specified... |
| 71 | S&F Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm all as specified and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long , complete all as specified. |
| 72 | S& F false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles of approved texture, 12mm thick thick micro tegular design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqmincluding both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws, work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge.complete all as specified. |
| 73 | S&F in repair stainless steel grating doom150x150mm ,complete all as specified and directed.. |
| 74 | S&F in repair Round shape thin rim Table top basin with fixing accessories of size 360mm x 360mm x 120mm ,complete all as specified.(Make : Jaquar Cat part No SLS-WHT-6905 or equivalent as approved by GE.) |
| 75 | S&F in repair EWC with wall hung cistern, Drainage L Bend Pipe, Gasket and Installation Kit with PP normal close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fitting, of size 350x480x395 mm with S trap complete all as specified.(Make Jaquar Cat No. CNS-WHT-551SNSPP184LZ or equivalent as approved by GE.) |
| 76 | Taking down existing chowkats or frames n.exc. 1.5 Sqm each removing to from store or handed over to contractor ,complete all as specified. |
| 77 | Taking down existing chowkats or frames exc. 1.5 Sqm but n exc 4.0 Sqm each removing to from store or handed over to contractor ,complete all as specified. |
| 78 | S&F factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 79 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified. |
| 80 | S&F factory made uPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made, complete all as specified. |
| 81 | S&F factory made uPVC white color Sliding / fixed type window / Ventilator Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 82 | Supply only 5.5 mm thick sheet oridinary quality glass and glazing with rubber packing around the glass, in squares n exceeding 0.50 sqm in each pane complete all as specified. |
| 83 | Supply only 5 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares n exceeding 0.50 sqm in each pane complete all as specified. |
| 84 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing ,complete all as specified. |
| 85 | S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification |
| 86 | S & F 100 mm size, Butt hinges, Stainless Steel, Medium weight, bright polished including fixtures complete all as specified. |
| 87 | S & F 150 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified. |
| 88 | S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified.. |
| 89 | S & F MS steel work in tubular /post/trusses/purlin including special shaped washers base and bed plate cleat nut and bolt etc confirming to IS 1161- 1979 graded St 240 complete all as specified. |
| 90 | S&F Stairs (framed) including stringers, treades, landing balusters, hand rails etc. including cleats brackets Fe 290 (Gde E-165) complete all as specified. |
| 91 | S&F stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement ,complete all as specified. |
| 92 | M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of Fe 290 (Gde E-165) complete all as specified. |
| 93 | S&F Expanded metal wire mesh weigth n exc 4 Kg per Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members ,complete all as specified. |
| 94 | M&L preparation of old painted steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all drops etc. complete all as specified. |
| 95 | M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender