Tender For Repair/ Replacement Of Helipad Lights, Security Lights, Lt Cables & Connected Items At installation Shikra Under Ge (Nw) Nofra.
Tender Value
49.39 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
16 days left
EMD
98788
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Helipad Lights, Security Lights, Lt Cables & Connected Items At installation Shikra Under Ge (Nw) Nofra.
BOQ
| Sl. No. | Item Description |
| 1 | Routine maintinance of air field Runway light System (AFLS) by attending fault testing of system, on regular basis to ensure serviceablity & checking of system etc ,including replacement of unseriviceable component including preventive maintinance spares by replacing parts other than mention in Schedule \\"A\\" installed at dispersal area INS Shikra with comprising of following:- |
| 2 | (a) Mantinance of runway light circuit no1 and 2 Approx consists of 65 runway lights including repairing & cleaning of lighting system complete.(b) Maintinance of constant current Regulator (CCR) unit and line stablizer 230 volt,50hz,10 kw,single phase.(c) Maintinance of Remote control unit at ATC.(d) Maintinance and Repairing,cleaning and replacement of holder/lamp of flood light fitting red/blue light.(e)Maintenance and Repairing,cleaning of blue and red light.(f) Maintinance of obstruction light at any height of building/Hanger etc. |
| 3 | All as per item no 1 above but for Rotating Beacon system. (a) Maintinance of complete Rotating Beacon System Consisting of 3 light assembly including of replacement of lamps/holder/carbon brushes. (b) Maintinance of rotating mechanism for beacon lamps. (c) Maintinance of Remote control unit at ATC. |
| 4 | Note:-1. For item no 1 & 2 Schedule & perventive maintinance of the equipment will be carried out as per the publication of the equipment in consultation with BLD department.2. Highly experience and dedicated Engineer and Technicians having knowledge & fully experienced in Repair and maintinance of runway lighting system shall be deputed to carry out runway light system and cost of the same shall be deemed to be included in the unit Rate quated.3. Holding of adequate spares parts for runway light shall be kept ready in stock,minimum 25% at site with essential tools for maintinance.4. On receipt of break down call, the defect shall be attended and rectified on priority with in 01(one) hours. Incase of any such failure,penalty of RS 500/- Per hour shall be recovered.5. Spares part shall be measured & paid under respective items. |
| 5 | Supply and fix in repair Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket complete all as specified and directed by Engr in Charge. |
| 6 | Supply and fix in repair of 250 watt LED flood light with cast aluminum housing , toughened glass cover, high power LED, second optics , IP 65/66 , 10KV SPD, 100 lm/watt, and prewired with all accessories complete all as specified and directed by Engr in Charge. |
| 7 | Supply and fix in repair of 100/120 WATT LED highbay/midbay intergral industrial high power LED High/midbaywith pressure die cast alluminium housing anodised aluminium reflector complete with all acessories. |
| 8 | M&L for scraping the old Painted surfaces and spray painting of LT Pole any size with two coat of synthetic enamel paint of approved colour complete with all fitting etc all as specified and directed by Engr in charge. |
| 9 | M&L for scraping the old Painted surfaces and spray painting of red/ yellow /blue and flood light poles lights around helipad any size with two coat of synthetic enamel paint of approved colour complete with all fitting etc all as specified and directed by Engr in charge. |
| 10 | Supply and fix in repair of LED lamp 14 Watt aviation obstruction light yellow/red epoxy flame orange painted die cast auminium alloy housing , heat resistant, clear thick glass and accessories complete all as specifed and dircted. |
| 11 | Supply and fix in repair of wind cone assembly (wind direction indicator) with bottom base plate and steady burning red obstruction light mounted on top,made of water repellent and resistant to rotating and mildew nylon fabric with colour combination red and white complete of size dia 600 mm, the dia of small end is 300 mm and length is 2.4 mtr complete all as specified and directed by Engr in Charge. |
| 12 | Supply and fix in repair of cable junction boxes IP 66/67 weather proof for outdoor installation(with knock outs cable entry junction box size should be 205 x 255 x 112 with terminals including all accessories complete all as specified and directed. |
| 13 | Supply and fix in repair of copper cable 4 sqmm 2 core PVC round sheathed insulated Unsheathed copper conductor industrial cable voltage 1100 volt for connection junction box to light. |
| 14 | Supply and fix in repair of copper cable 2.5 sqmm 2 core PVC round sheathed insulated Unsheathed copper conductor industrial cable for voltage 1100 volt complete all as specifed and directed. Please Enable Macros to View BoQ information |
| 15 | Supply and fix in repair of copper cable 2.5 sqmm 2 core PVC round sheathed insulated Unsheathed copper conductor industrial cable for voltage 1100 volt complete all as specifed and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender