Tender For Maintenance Contract For Civil Works From Soorghat (Excluding) To Shalimar Bagh Metro Station (Including) Of Line-7.
Tender Value
7.06 Crore
Estimated cost
Bid Submission
18 Nov 2026
5 days left
EMD
2.35 Lakhs
Bank guarantee accepted
Document Fee
23600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Contract For Civil Works From Soorghat (Excluding) To Shalimar Bagh Metro Station (Including) Of Line-7.
BOQ
| Sl. No. | Item Description |
| 1 | Total of (Schedule-A + Schedule-B) |
| 2 | Total of Schedule C |
| 3 | Total of Schedule-A |
| 4 | Total of Schedule-B |
| 5 | Total of Schedule-C OCM-2338 APPENDIX- 3A PROFORMA FOR STATEMENT OF MINOR DEVIATIONS (Refer Clause C 2.2(d) and C 15.1 of ITT) 1. The following are the particulars of minor deviations from the requirements of the Tender Document: Sr. No Clause Deviations Price reduction for each deviation/s Note : 1. The Tenderer shall indicate price reduction against each deviation in Appendix-3A of BOQ. This price is the price which the tenderer shall reduce from this tender price if deviation(s) is/are accepted by the Employer. 2. Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No Deviations’. In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the tenderer has not proposed any deviations from tender documents. 3. It shall be noted that in case Nil/Zero/NA Price quoted by Tenderer in Appendix-3A then it shall mean that contractor has quoted same price for deviation and undeviation bid. 4. If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender, other than in this Appendix, it will have no effect. Signature of authorized signatory On behalf of Tenderer OCM-2338 Preamble |
| 6 | The Bill of Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to Tenderers, General and Special Conditions of Contract, Employer's Requirement and Technical Specification and other relevant documents. |
| 7 | BoQ1 consists of Schedule A (DSR-2023 Items), Schedule B (NDSR Items) and Schedule C (NDSR Items- Manpower). |
| 8 | The rates and prices to be tendered in the unit Priced Bill of Quantities of Schedule A (DSR-2023 Items), Schedule B (NDSR Items) and Schedule C (NDSR Items- Manpower) are for completed and finished items of works and complete in all respect. |
| 9 | Tenderers shall quote their offer in Indian Rupees (INR) only. Tenderers are required to be quoted percentage (%) Excess/Less for Schedule A (DSR-2023 Items) and Schedule B (NDSR Items) in figures in the appropriate highlighted cells in the BoQ1 sheet. Tenderers are required to be quoted percentage (%) Excess for Schedule C (NDSR Items-Manpower) in figures in the appropriate highlighted cells in the BoQ1 sheet. All the quoted rates will be deemed to include Duties, Taxes, Octroi, Royalty etc., cost of all plants, labour, supervision, materials, scaffolding for masonry work & any work etc., G.I. binding wire, all lead & lifts, transport, all temporary works, erection, maintenance, utility identification, contractor’s profit and establishment/ overheads, together with preparation of design and drawings, all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the contracts. For taxes and duties refer clause C2.5 of ITT & clause 10 of SCC. |
| 10 | The price offer in the BOQ shall be given without considering any deviation mentioned in Appendix-3 of FOT i.e. price in the box shall be quoted as per tender conditions without any deviation. |
| 11 | If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non- responsive and shall be rejected. |
| 12 | Errors will be corrected by the employer for any arithmetical errors in computation or summation as per contract conditions. |
| 13 | The Financial Proposal (as per BOQ) shall be uploaded online on the website http://etenders.gov.in/eprocure/app. The rates shall be quoted in the excel file provided in the bid documents. The tenderer shall download the excel file and quote the rates against each highlighted cells in BoQ1. After quoting their rates the excel file shall be uploaded accordingly. The rates shall not be offered/quoted elsewhere in the technical submission/ tender submission. |
| 14 | The actual work executed against all the BOQ as detailed in tender document would be paid on measurement basis. |
| 15 | The contractor may raise their “On Account” payments on monthly/ quarterly basis as per the status of work on the last day of the respective month as per GCC clause 11.3. |
| 16 | In case of any discrepancy in DSR items covered under Schedule 'A' the relevant items as mentioned in DSR published by CPWD shall prevail. Please Enable Macros to View BoQ information DELHI METRO RAIL CORPORATION LIMITED BOQ Name of Work: OCM-2338: Maintenance Contract for Civil works from Soorghat (excluding) to Shalimar Bagh Metro station (including) of Line-7. S. No. Item Code Description of items Unit Rate Qty Amount (₹) SCHEDULE-'A' (DSR 2023) |
| 17 | DSR-1 |
| 18 | DSR-2 Gross Total of Schedule' A' (DSR Civil - 2023) (inclusive of GST @18%) 42400000.0 Correction Factor of Schedule-A (0.973) 41255200.0 Total of Schedule-'A'(DSR Civil - 2023), exclusive of GST ( A/1.18) 34962033.9 Add GST @ 18.00% 6293166.1 Total of Schedule-'A' (DSR Civil - 2023) i/c GST @18% 41255200.0 SCHEDULE- 'B' (NDSR items) |
| 19 | NDSR-1 |
| 20 | NDSR-2 |
| 21 | NDSR-3 |
| 22 | NDSR-4 NDSR Dry Stone Cladding- GraniteSupplying, providing and fixing prepolished granite stone work ofup to and including sizes of 1200mm.X600mm of approved colour/pattern with 2mm wide groove all around at all levels for wall linings/columns/skirting (veneer work) by mechanical arrangement with SS cramps/brackets (SS Grade 316), anchor bolts, 5mm vertical SS pins, 65mm long (SS Grade 316) of approved make and inserts as per drawings and specifications. The cost of making necessary grooves all around stone pieces, chamfering of comer edges and polishing are included. Allow for cutting of holes and box outs for se1vices etc. Minimum Compressive strength shall be as per I Sm 1121 (part I) . Water absorption Test shall be carried out as per IS 1124. All Groove for fixing the Cramps to be cut on machine table only or as per direction of Engineer- in-charge |
| 23 | NDSR-5 |
| 24 | NDSR 5.2.1 NDSR 1 mm thick Sqm 438.03 100.0 43803.0 |
| 25 | NDSR-6 |
| 26 | NDSR-7 |
| 27 | NDSR NDSR 8 & 9 Sanitary Installation, Water Supply & Drainage, Plumbing items |
| 28 | NDSR 8.1.1 NDSR 40mm Each 7579.32 10.0 75793.2 8.1.2 NDSR 50mm Each 8273.0 30.0 248190.0 8.1.3 NDSR 65mm Each 12287.0 10.0 122870.0 8.1.4 NDSR 80mm Each 12287.0 10.0 122870.0 |
| 29 | NDSR NDSR The base of the stainless steel bottom cladding will be anchored to the floor with a clearance height upto 150mm. The top fitting should consist ofSS top rail which will get fixed with pilasters. SS wall fixing is used only on the wall which will hold the ss top rail. 9.13.1 NDSR Toilet Cubicle with standard dimension of 2000-2100mm Height x 1000mm Width x 1550mm Depth, which includes 600mm door size width as per drawing, however in case of change nothing shall be paid extra). Nos 38257.27 5.0 191286.35 |
| 30 | NDSR 9.14.1 NDSR i) All screw will of 304 grade in SS with stain finish. All pilasters are supported by SS bottom cladding. Stainless steel L clamp is used to attach the divider to the wall, stainless steel L clamp hardware fittings along with SS 304 screws are used to fix the Urinal partitions on the wall. Nos 5241.25 50.0 262062.5 |
| 31 | NDSR 10 |
| 32 | NDSR 10.2.1 NDSR Brackets(sides) Each 381.74 100.0 38174.0 10.2.2 NDSR Wire spring Each 534.42 100.0 53442.0 10.2.3 NDSR Spring holder Each 190.88 100.0 19088.0 10.2.4 NDSR MS. Gararee device. Each 1526.93 100.0 152693.0 10.2.5 NDSR Gear box. Each 3817.31 100.0 381731.0 10.2.6 NDSR Rolling shutter handle. Each 229.05 100.0 22905.0 10.2.7 NDSR Locking Naka/kundee including welding. Each 76.35 100.0 7635.0 10.2.8 NDSR Ball bearing. Each 229.05 100.0 22905.0 10.2.9 NDSR Gararee rod. Each 916.16 100.0 91616.0 10.2.10 NDSR MS. Top cover. Mtr. 375.68 100.0 37568.0 10.2.11 NDSR Bottom locking rail. Mtr. 626.13 100.0 62613.0 10.2.12 NDSR MS. Lath. Mtr. 100.19 100.0 10019.0 10.2.13 NDSR MS. Pipe shaft 2\\" dia. Mtr. 375.71 100.0 37571.0 10.2.14 NDSR Side guide rail Mtr. 250.46 100.0 25046.0 10.2.15 NDSR M.S. Grill. For ( existing pattern ) Sqm 2052.94 100.0 205294.0 10.2.16 NDSR Rolling shutter lever lock. Each 1449.84 100.0 144984.0 |
| 33 | NDSR 11 |
| 34 | NDSR 12 |
| 35 | NDSR 13 |
| 36 | NDSR 14 |
| 37 | NDSR 15 |
| 38 | NDSR 15.4.1 NDSR 200 mm diameter Mtr 1751.06 800.0 1400848.0 |
| 39 | NDSR 15.5.1 NDSR 200 mm x 100 mm Dia, Reducer Tee Each 1910.97 100.0 191097.0 15.5.2 NDSR 200 mm x 200 mm Dia, Bend Each 687.63 300.0 206289.0 |
| 40 | NDSR 15.8.1 NDSR Size- 25mm x 200mm (25nun Width & 200mm Height) Sqm 3984.6 100.0 398460.0 |
| 41 | NDSR 15.9.1 NDSR for WPC panel 25mm thick with or without CNC cutting, Coloured Exterior grade Sqm 4800.66 80.0 384052.8 |
| 42 | NDSR 15.10.1 NDSR Extra for CNC cutting in HPL sheet as per architectural drawing Sqm 1334.87 80.0 106789.6 |
| 43 | NDSR 15.11.1 NDSR SS 316 Stud ( Button) SS 316 Tactile Indicator Warning Stud with Carbornndum Insert of yellow color Size 35mm x 25mm x 5mm: Head dia- 35mm, Carbornndum dia- 25mm, thickness of head -5mm, stud dia-6mm, stud/stem height- 12mm. Each 87.49 500.0 43745.0 15.11.2 NDSR SS 316 Tactile indicator Directional Strip - SS 316 Tactile Indicator directional strip with Carborubdum Inse1t of yellow color Size - 35mmx25 mm x 280 mm- Length - 280mm, width - 35mm, Carborundum width -25mm, thickness of strip-5mm, Stem height- 12mm, stem dia- 6mm Each 545.03 500.0 272515.0 15.11.3 NDSR Providing and laying approved make GRC linear (directional) & button (hazard) paving Tactile 300x300x22-25 mm thick yellow colored made with M40 grade concrete tile(as per specification) laid on floor with 20 nun thick cement mortar ( I cement: 4 coarse sand)including filling the joints with white cement and matching pigment of tile shade complete aspe manufacturer specification complete. Each 127.52 500.0 63760.0 Total of Schedule - 'B' (NDSR) ITEMS 23349805.65 Total of Schedule-B: NDSR exclusive of GST( B/1.18) 19787970.89 Add GST @ 18.00% 3561834.76 Total of Schedule-'B': (NDSR ITEMS) i/c GST @18% 23349805.65 SCHEDULE- 'C' (NDSR ITEMS) (Manpower) |
| 44 | NDSR Total of SCHEDULE- 'C' (NDSR ITEMS) (Manpower) 6035728.0 Total of Schedule-C: NDSR Items ,exclusive of GST (C/1.18) 5115023.73 Add GST @ 18% 920704.27 Total of Schedule-C: NDSR Manpower items including GST 6035728.0 TOTAL OF SCHEDULE (A+B+C) (inclusive of GST) 70640733.65 Total of Schedule-A+B+C, exclusive of GST (D/1.18) 59865028.52 |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender