Tender For Nctps Ii - M I Circle - Bm Division - Unit I 600Mw Boiler - Supply And Erection Of Refractory In The Damaged / Broken Up Areas In Rear Arch Slope, Pent House, Drum Enclosure Area, Water Wall Bottom Neck Area, Dock House Area Etc., And Clea
Tender Overview
Project Description
Tender for Nctps Ii - M I Circle - Bm Division - Unit I 600Mw Boiler - Supply And Erection Of Refractory In The Damaged / Broken Up Areas In Rear Arch Slope, Pent House, Drum Enclosure Area, Water Wall Bottom Neck Area, Dock House Area Etc., And Cleaning And Painting Of Safety Valve Silencers & Its Structures And Scanner Air Pipeline In Boiler During The Year Aoh 2026 - 27.
BOQ
| Sl. No. | Item Description |
| 1 | Castable Refractory :Charges for transportation of materials to work site, cleaning of patch up area and patch up of refractory in the damaged / broken up areas in rear arch slope, pent house, drum enclosure area, waterwall bottom neck area, dock house area etc., Charges inclusive of transportation, consumables and T&Ps. |
| 2 | Charges for Removing of caved and damaged refractory layer and insulation without damaging the adjusant deck sheets, collecting the debris in a gunny bag without polluting the surrounding and bringing down from 88mtr to 0mtr, transporting and dumping the debris from boiler to the dump yards as instructed by site in charge, including leading, lifting of necessary T&P's and consumables from 88m to 0m elevation of boiler and from boiler '0' mtr to dump yard area. ( The contractor should be arrange necessary truck for the transportation) |
| 3 | Charges for dismantling damaged deck sheet and structural supports between damaged horizontal deck support structural channel at 88 mtr elevation at boiler pent house, lowering the dismantled scrap materials from 88 mtr to \\"0' mtr elevation, transporting and devoluting to stores, including leading, lifting, necessary T&P's and consumables ( Elevation -> Above 50mtr ) |
| 4 | Charges for leading, lifting and transportation of iron and steel materials from store to site. Including leading, lifting, necessary T&P's and consumables ( Elevation -> Above 50mtr ) |
| 5 | Charges for fabrication and erection of MS structurals and patch up work. (Penthouse roof strengthening and damaged skin casing sheet renewal work). Including leading, lifting, necessary T&P's and consumables ( Elevation -> Above 50mtr ) |
| 6 | Pourable Refractory :Charges for transportation of refractory materials to work site including leading and lifting of material from '0' mtr elevation to '88' mtr elevation, laying of fresh refractory over the old / newly fabricated deck sheet in between the support with support sheets with LRB wool mattrees layer placed with equal distances for a thickness of 275mm. Including cost of consumables and T&Ps complete. |
| 7 | Silencer painting :Charges for surface preparation and two coat of Lumerous - HR - 47 Aluminium painting on the Silencers of Drum Safety valve, Startup vent, Super heater safety valve and reheater safety valve, including cost of Lumerous - HR - 47 - Aluminum paint, consumables and T&P's etc., |
| 8 | Silencer supports painting :Charges for cleaning & painting of Silencer suppor structures. Each one coat of red oxide zinc chromate primer and two coat of smoke grey enamel paint including cost of paint labour, consumables and T&P's. |
| 9 | Providing special type platform to access the Safety valve silencer @ 100 mtr EL for the entire silencer painting work.The charges for transportation of scaffolding materials and consumables to the boiler roof top area, erecting the scaffolding and temporary platform for facilitating attending the above work. After completion work, removing the scaffolding and temporary platform from the area and shifting back the scaffolding materials. Charges inclusive of T&P's and consumables. |
| 10 | Scanner Air pipeline painting :Charges for cleaning & painting of two coat of smoke grey enamel paint in scanner air pipeline including cost of paint labour, consumables and T&P's. |
| 11 | Supply of Castable Refractory as per specification. Including loading, transporting & unloading charges. |
| 12 | Supply of Pourable Refractory as per specification. Including loading, transporting & unloading charges. |
| 13 | Supply of MS Beam, MS Channel, MS Angle and MS Plate as per site requirement Material : IS 2062Including loading, transporting & unloading charges. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender