Tender For Integrated Development Of Basic Facilities For Devotees Of Arulmigu Magudeswarar And Veeranarayana Perumal Temple At Kodumudi Taluk Erode District
Tender Value
3.13 Crore
Estimated cost
Bid Submission
13 Nov 2026
13 days left
EMD
2.16 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Integrated Development Of Basic Facilities For Devotees Of Arulmigu Magudeswarar And Veeranarayana Perumal Temple At Kodumudi Taluk Erode District
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation for foundation in all soils and sub soils and to full depth as may be directed except in, Hard rock requiring blasting, but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed watered consolidated and depositing the surplus earth within the compound in places as shown by the departmental officers with an initial lead, and lift etc., complete complying with standard specifications. ( Narrow foundation) |
| 2 | Earthwork excavation for foundation in all soils and sub soils and to full depth as may be directed except in, Hard rock requiring blasting, but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick, well rammed watered consolidated and depositing the surplus earth within the compound in places as shown by the departmental officers with an initial lead, and lift etc., complete complying with standard specifications. ( openfoundation) |
| 3 | Supplying and filling in foundation and basement with M sand in layers of not more than 15cm.thick well rammed watered and compactedetc., complete complying with standard specification. |
| 4 | Refilling with excavated earth other than sand with an initial head load of 100 mts.and depositing the earth as shown by the departmental officers in layers of not more than 15cm thick well rammedwith surface vibrator, watered and consolidated etc.,complete complying with standard specification and as directed by the departmentalofficers. |
| 5 | Wet Mix Macadam (Table:400-13): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 406) |
| 6 | Providing and laying Plain Cement concrete of 1:5:10 ( one cement Five M sand and Ten aggregate) using 40mm HBGS jelly (well graded) confirming to IS specified grading (to produce concrete of the specified grading and characteristic strength of 10N/mm2 at 28 days) and mixing the ingredients by mixer machine including dewatering by bailing/pumping wherever necessary laying the concrete in layers and in bays with all leads and lifts, compacting and finishing the surface, watering, curing etc.,complete complying with standard specifications and as directed by the departmental officers for( FOUNDATION BASE COURSE) |
| 7 | Supplying and erecting Steel shuttering including necessary supports for Plane Surfaces in foundation and basement for reinforced cement concrete works such column footings, plinth beam, Grade beam, Stair Case steps, bed blocks etc., which requires only nominal strutting using stiffened with mild steel sheets of suitable size 90cm x60cm and BG 10 stiffened with mild steel angles of size mm of 25mm x 25mm x 3 mm for boardinglaid over silver oak joists of size 10cm x 6.50 cm spaced at about 60 cm centre to centre and supported by the casurina props of 10 cm to 13 cm dia paced at 75 cm centre to centre or at suitable intervals etc., complete |
| 8 | Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers.Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge 100Cft |
| 9 | Basement cm 1:5 |
| 10 | Ground Floor cm 1:6 |
| 11 | Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 12 | Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m (expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifi cations. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the depart mental Officers. (Payment for centering shall be given after the concrete is laid). |
| 13 | Above Ground level Up to 3.60m Ht |
| 14 | From height 3.60-4.90m |
| 15 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals. MS Channel Section (ISMC 100) shall be provided as a vertical support @1.20m C/C and with Lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) & steel pipes of 20mm dia @ required level/spacing etc. complete complying with standard specifcation and as directed by the departmental officers. (Payment for centering shall be given after the concrete is laid) |
| 16 | Place surface Vertical walls |
| 17 | Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 18 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 19 | Below GL up to 1.50m |
| 20 | Below GL up to 1.50m-4.50m |
| 21 | Above GL Up to 4.50m |
| 22 | Above 4.50m |
| 23 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) |
| 24 | Below GL Up to 1.50m (F+B) |
| 25 | Below GL Up to 1.50m-4.50m |
| 26 | Above GL Up to 4.50m |
| 27 | Above 4.50m |
| 28 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick Paving the floor with best approved quality fine polished Granite Stone Slabs of following size and Variety with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work) |
| 29 | Paving the floor with best quality vitrified Tiles of size 800x800 x10mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 30 | Dadooing walls with following best approved quality, white / colour glazed tiles of size 300x450x8mm conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 31 | Supplying, and fixing M.S. GRILLS for open courtyard grill, grill work to doors, windows and ventilators etc, using necessary flats for inner and outer members which should be fixed or welded to masonry or column including necessary dismantling or making holes and redoing the same to original condition as directed by the departmenta officers inclusive of cost of providing one coat of best quality red oxide primer completre complying with standard specifications. |
| 32 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 33 | Supplying and fixing best Qulality CW Scantlings ( below 3m in length) - Malabar wood used in door frame including Labour wrought and put up in position of frames inclusive of fixing holdfasts for doors, etc. The wood should be got approved from the Executive Engineer beforeo useon work.complete complying with standard specification |
| 34 | Supplying and fixing best Qulality TW Scantlings ( below 3m in length) - Malabar wood used in door frame including Labour wrought and put up in position of frames inclusive of fixing holdfasts for doors, etc. The wood should be got approved from the Executive Engineer beforeo useon work.complete complying with standard specification Data No: |
| 35 | Supplying and fixing solid core flush shutter of following type with thickness and necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 6 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm), 3 Nos. 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers -Double leaf.Door Shutter Type :Thickness |
| 36 | White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed. |
| 37 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 38 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the departmental officers |
| 39 | UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 40 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 41 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 42 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works). |
| 43 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 44 | Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) |
| 45 | Providing and fixing 30mm thick Factory made solid panel P.V.C. DOOR shutter WITH DOOR FRAME conforming to I.S. 4020 with up to date amendments consisting of shutter frame made out of M.S. tubes of 19 gauge thick and size of 19mm x 19mm for styles and 15mm x 15mm for top and bottom rails, M.S. frames shall have a coat of steel primer of approved make and manufacture. M.S. frames shall be covered with 5mm thick heat moulded P.V.C. 'C' channel of size 30 x 75mm for styles, 30 x 75mm for top, rail lock, rail bottoml. On either side 2 Nos.of 5mm thick, 20mm wide cross PVC sheet shall be provided as gap insert for for top rail and bottom rail. Panelling of 5mm thick PVC sheet to be fitted within the M.S. frame welded/ sealed to the styles and rails with 30mm wide 5mm thick PVC sheet beadings on either side and joined together with solvent Cement adhesive shall be rigidly fixed in position including necessary furniture fittings. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' channel using PVC solvent adhesive complete complying with standard specification and asdirected by the departmental officers. |
| 46 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutte for Sliding Door |
| 47 | Temple Pattern Ornamental Doors with high qualityteakwood (country) with 2” minimum to 7” maximum thickOrnamental Frames, 2” thick to 5” thick Kamala (FlowerPlanks), Creeper, Birds, Animal Figures,Sculptures, etc.Backside 1” thick to 3” plank including necessary carving,shaping, wastage, etc., as per approved plan and design |
| 48 | Providing, erecting and fixing of All steel members Using Steel rectangular holloe section for all Roof portion as per approved drawing All steel fabrication works & All welding works are strictly followed in IS code as mention in the approved drawing. The cost includes cost of all materials, process charges like gas cutting, welding, machining, scaffolding charges, labour charges for dismantling, loading, lifting, unloading, transport, erection, labour charges for equipments like crane, chain pulley block, power charges from generator, risk allowance for working at a height of more than 3m, conveyance to site and clearing them after completion of work complete and as directed by the departmental officers. |
| 49 | Supplying and fixing Best Quality Mangalore Tiles (I class A) over best Quality ceiling tiles 200x200x20mm over Steel rafters for All roof porion The cost includes cost of all materials, scaffolding charges, etc complete. The Mangalore tiles and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. and as directed by the departmental officers |
| 50 | Painting new iron works such as steel steel members& window Grill works with one coat of red oxide priming coat and two coats of best approved first quality and colour of synthetic enamel paint in all floors complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 51 | Conveyed earth with Lead of 10km and filling in bathing ghat step slope area the earth in , hard red earth, shales,murram, gravel, stoney earth and earth mixed with small size boulders SS.20B as as directed by the departmental officers. |
| 52 | Flooring with stone flooring Stone not less than 100mm set in cement mortar and pointing with cement mortar1.3 including watering and curring etc complete The stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 53 | Supplying and laying of Interlocking Paver Block Stone 60 mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers. |
| 54 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of thecharges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 55 | Manufacturing, supply & fixing of precast kerb stone of size 400x259x 200 200mm thick made of M 20 grade of concrete rectangular in shape with one corner chamfered by 100 mm x 100 mm as per approved design i/c cost of all material, labour and curing etc.,complete. as per IRC 5758 - 1984. |
| 56 | Providing , laying and Marking of hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes etc., complete as per MoRT&H specification |
| 57 | Supplying, laying and jointing PVC pipes (having working pressure 6 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. |
| 58 | 110mm Dia PVC pipe |
| 59 | 75mm Dia PVC pipe |
| 60 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 61 | 110 mm dia PVC Elbow |
| 62 | 110 mm dia PVC Plain Bend |
| 63 | 110 mm dia PVC Tee |
| 64 | 75 mm dia PVC Elbow |
| 65 | 75 mm dia PVC Plain Bend |
| 66 | 75 mm dia PVC Tee |
| 67 | Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. - Above Ground Level. |
| 68 | 50 mm dia Pipe |
| 69 | 32 mm dia Pipe |
| 70 | 25 mm dia Pipe |
| 71 | 15 mm dia Pipe |
| 72 | Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 73 | 50mm dia |
| 74 | Elbow |
| 75 | Union |
| 76 | Hex Nipple |
| 77 | 32mm dia |
| 78 | Elbow |
| 79 | Union |
| 80 | Hex Nipple |
| 81 | 25 mm dia |
| 82 | Elbow |
| 83 | Union |
| 84 | Hex Nipple |
| 85 | 15 mm dia |
| 86 | Elbow |
| 87 | Union |
| 88 | Supplying and fixing in position best quality and approved varity with ISI mark Gun Metal Gate Valve / Wheel Value of the following dia including necessary charges for cutting and threading of GI Pipes for jointing the gate valve in position etc., complete complying with standard specification |
| 89 | 50 mm dia GM Gate Valve |
| 90 | 32 mm dia GM Gate Valve |
| 91 | 25 mm dia GM Gate Valve |
| 92 | Supplying and fixing in position 15mm dia brass SS Heavy Duty Long Body Tap 15mm (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 93 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 1000x780 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) |
| 94 | Supplying and fixing approved best quality SS Towel Rack 600mm long with Lower Hanger including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 95 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 96 | Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works). |
| 97 | Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Lower End |
| 98 | Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Lower End |
| 99 | Supply and fixing of 4' 20W LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end) |
| 100 | Supply and fixing of 20W LED Mirror light fitting on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end) |
| 101 | Supply and fixing of Water tight Bulkhead fitting with Guard suitable with 9W/7W LED Bulb |
| 102 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm fan down rod on exisitng fan clamp |
| 103 | Supply and fixing of 300mm (12\\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall |
| 104 | Supply and fixing of louvers shutters arrangements for 300mm (12\\") sweep (light duty) AC exhaust fan |
| 105 | supply and fixing of 30W LED street light fitting with LED (Higher end) with 25mm dia. GI pipe (class B) with 1 no.25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting. |
| 106 | Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Lower End |
| 107 | Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Lower End |
| 108 | Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush wall with earth connection only. Lower End |
| 109 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End |
| 110 | Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion. |
| 111 | Supply and Laying of 2 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 112 | Supply and clamping of 2x10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps |
| 113 | Supply and fixing of brass cable gland for 2x10 sq.mm. PVC armoured LTUG cable with earth connection |
| 114 | Design, supply, erection, testing and handing over of 16mtr High Mast Structure Crompton /Havells/Bajaj/make or equivalent with required number of continuously tapered hot dip galvanized steel polygonal sides sections with telescopic strip joints to a total height of 16 meters capable of sustaining the maximum wind pressure at the erection site with single flange base plate secured welded in the bottom of the base mast section with vertically movable hot dip galvanized lantern carriage and accessories such as electrical junction box brackets for providing 8 Nos. 250W LED flood light luminaries (Higher End) complete head frame assembly, Pulley drive, stainless steel wire rope single/double drum self lubricating winch arrangement suitable for raising and lowering the luminaries carriage ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and anchor plates and templates including supply and fixing the following accessories in the Mast. |
| 115 | Supply and fixing of 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole withbase plate of size 300 x 300 x 12mm as per IS-875with following specification. Bottom Pole Dia - 130mmTop Pole Dia - 70 mm Thickness of Pole - 3 mmThe pole should be hot dip galvanized confirming toBESN ISO-1461 with thickness of 65 Micron with concreting with construction of masonary pedestal with suitable box with door arrangement to house 1 no 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and with 1 no. 80W LED street light complete with electrical connections . (Higher End). |
| 116 | Supply and fixing of 8m Free Standing 8 sided Octogonally continously tapered structured pole withbase plate of size 300 x 300 x 12mm as per IS-875with following specification. Bottom Pole Dia - 130mmTop Pole Dia - 70 mm Thickness of Pole - 3 mmThe pole should be hot dip galvanized confirming toBESN ISO-1461 with thickness of 65 Micron with concreting with construction of masonary pedestal with suitable box with door arrangement to house 1 no 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and with 2 nos. 200W LED flood light completeo on suitable cross arm on the top of the pole with electrical connections . (Higher End). |
| 117 | Supply and fixing of single phase timer control for street light with 1 no. 32A DP MCB, 230V operated L&T 32A - 4 Pole Contactor (MCX-3) in suitable enclosure box with necessary accessories, painting and with required inter connections complete. (Data J) |
| 118 | Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (For Mini mast pole) |
| 119 | Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps. |
| 120 | Supply and fixing of brass cable gland for 4 x 16 sqmm PVC armoured LTUG cable with earth connection. |
| 121 | Supply and Laying of 3½ x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 122 | Supply and clamping of 3½ x 25 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps. |
| 123 | Supply and fixing of brass cable gland for 3½ x 25 sqmm PVC armoured LTUG cable with earth connection. |
| 124 | Supply and providing cable end termination of 3½ x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (SD 223) Box with double door |
| 125 | Supply and fixng of TNEB meter board suitable for 3phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2feet angle iron of size 1-1/2\\"x1-1/2\\"x1/4\\" rigidly fixe don wall covered with hylem sheet of size 2 feet x 1-1/2feet of 12 mm thickness with necessary bolts and nuts supports and supply and fixing o f3Nos.100A fuse units (500V), 1No. neutral link, copper earth flat of size 1\\"x1/4\\" with interconnection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete |
| 126 | Supply and fixng of TNEB meter board suitable for 3phase 63As ervice connection made up of suitable angle iron frame work of size 2feetx1-1/2 feet angle iron of size 1-1/2\\"x1-1/2\\"x1/4\\" rigidly fix edon wall covered with hylem sheet of size 2feetx1/2feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos. 63 A fuse units (500V), 1No.neutral link, copper earth flat of size 1\\"x1/4\\" with inter connection of EB metert of 16sq.mm PVC insulated copper wire with 1No63 Amp 30 mA Four Pole RCD / RCCB (Lower End) with suitable necessary connection with earth connection complete (SD 132). |
| 127 | Supply and Laying of 3½ x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 128 | Supply and clamping of 3½ x 50 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps. |
| 129 | Supply and fixing of brass cable gland for 3½ x 50 sqmm PVC armoured LTUG cable with earth connection. |
| 130 | Supply and providing cable end termination of 3½ x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete |
| 131 | Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth |
| 132 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry |
| 133 | Supply and run of 25mm x 6mm GI flat with necessary clamps / supports on wall / floor / ground for earthc onnection |
| 134 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection. |
| 135 | GST Amount for providing Service to Government Contract Works for the above works at 18%(9%+9%). {GST Amount is the Total GST Amount for overall quoted amount} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender