Tender For Construction Of Additional Accommodation For Bhs Kaisermullah Budgam.
Tender Value
92.14 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
3 days left
EMD
1.84 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Additional Accommodation For Bhs Kaisermullah Budgam.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 2 | Providing and laying of stone soling in trenches hand packed including all leads, lifts, loading, unloading, dressing, head load, ramming with iron rammer all carriage of materials involved from approved nearest sources to site of work(all complete). |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 7 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 8 | Providing and fixing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length KD wood |
| 9 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood 30 mm thick |
| 10 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class Kail wood 30mm thick |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws30mm thick |
| 12 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 13 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 14 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. |
| 15 | Providing and fixing of 12mm ply to ply plywood incl. all necessary fittings, fixtures, jambing, frame work, all cost of materials and labour involved during the completion of work all complete as ditected by EIC. |
| 16 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. Changez Khani |
| 17 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 18 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 19 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite of any colour or shade (Area of slab over 0.5 sqm) 18 mm Thick |
| 20 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble Work |
| 21 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 22 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 23 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 24 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 25 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 27 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 31 | Suspended floors, roofs, landings, balconies and access platforms |
| 32 | Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 33 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all levels Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 34 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate. |
| 35 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 36 | Providing and fixing piano finish decorative panelling of approved make, colour, design and finish, including MDF/plywood base, laminate/acrylic or PU piano finish surface, necessary framing, supports, adhesives, screws, edge finishing, cutting, jointing and all accessories, complete in all respects as per approved drawings, specifications,cornice beedings including all costs of materials and labours for frame work for the base and directions of the Engineer-in-Charge. |
| 37 | Providing and fixing 0.50 mm thick (+0.05 mm tolerance) H.I. ribbed, colour-coated roofing sheets on horizontal, vertical or curved surfaces, fixed with polymer-coated J or L hooks, 8 mm diameter bolts and nuts, PVC limpet washers or G.I. limpet washers filled with white lead, including cutting to the required size and shape, Providing and fixing of ridges and valleys, necessary overlaps, fastening and finishing, complete in all respects as per approved drawings incl. cost of all materials and labours required during execution of work all complete in all respects. |
| 38 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, |
| 39 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 40 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 41 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 42 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 43 | Providing and Fixing PVC Pipes and sanitary Fittings of Approved Brand(Type-B) Including Cost of Labour Charges for Cutting of Wall/Floor incl.laying in proper gradient and fixing in position all complete job. |
| 44 | 4\\" Dia |
| 45 | 3\\" Dia |
| 46 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 of approved make and manufacturer. |
| 47 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 of approved make and manufacturer. |
| 48 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 49 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 50 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm |
| 51 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 52 | Providing, installation, commissioning and testing Hot water Geyser of approved make (Venus, Racold, Jaguar or equivalent) including all fittings and fixtures, including cost angle valves, connection pipes, etc and making necessary connections. 50 litre capacity. Complete job as directed by EIC. |
| 53 | Carriage of materials from approved source to site of work including loading unloading complete. |
| 54 | Stone Aggregates to site from nearest source above 40mm for an average lead of 15 Km |
| 55 | Stone Aggregates to site from nearest source below 40mm for an average lead of 15 Km |
| 56 | Sand from nearest source to site for an average lead of 18 Km |
| 57 | Bricks from nearest source an average lead of 13 Km |
| 58 | Wiring for light point in 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Polycab / Finolex / Havells / Anchor / Salzer make in surface / recessed medium class PVC conduit (25 mm dia PVC conduits including cutting of walls / floors with hydraulic cutters and refacing to original position by way of cement plastering / POP / painting etc., complete job), with 6 Amps modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (P+N+E for normal and inverter points per room is to be provided separately). The job includes providing and fixing of 6 Amps single-pole MCB to be housed in DB box, including cost of MCB and DB box. The job further includes providing and fixing of 12–15 Watts LED downlighting fixture (commercial type) having aluminium body of standard make, duly ISI marked, including GI lighting deep to be recessed in slab, complete job. |
| 59 | Wiring for Heating point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable of Polycab / Finolex / Havells / Anchor / Salzer make in surface / recessed medium class PVC conduit (25 mm dia PVC conduits including cutting of walls / floors with hydraulic cutters and refacing to original position by way of cement plastering / POP / painting etc., complete job), with 6 Amps modular switch, 350 Watts fan dimmer, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (P+N+E for normal and inverter points per room is to be provided separately). The job includes providing and fixing of 6 Amps single-pole MCB to be housed in DB box, including cost of MCB and DB box. The job further includes providing and fixing of 1200 mm sweep ceiling fans with fan deep fabricated out of heavy-gauge sheet steel to be recessed in slab, of standard make, duly ISI marked, complete job. |
| 60 | Providing wiring for 16 Amp power socket outlet points in 3 × 4.0 sq.mm (P+N+E) FRLS PVC insulated multi-strand copper conductor wires of Polycab / Finolex / Paramount / Anchor make to be laid in surface / recessed medium-class PVC conduit (including cost of conduit / channel). The job includes providing and fixing of 16 Amps one-way switch and 16 Amps one-way socket of modular series with cover plate to be fitted on GI box of required size, to be fitted on walls with necessary screws, including refacing of walls wherever required, complete job. The job includes circuit wires from DB box to first switch in sub-circuit; a maximum of two points shall be paired in one circuit, complete job. No extra circuit wiring will be paid whatsoever the length. The job further includes providing and fixing of 16 Amps single-pole MCB to be housed in DB box, including cost of MCB and DB box. |
| 61 | Supplying and fixing of 40–63 Amps rating DP, 240/415 volts (10 KA), of standard make, duly ISI marked, complete with connections incl. cost of DB Box for housing of MCB's |
| 62 | Supplying, installing, testing and commissioning of 900 mm sweep ceiling fans of approved make and rating, including all necessary fittings, fixtures, down rods, canopies, suspension arrangements, fasteners, electrical connections and accessories required for proper installation and satisfactory functioning, complete in all respects as per approved specifications and directions of the Engineer-in-Charge, including the cost of all materials and labour involved in the execution of the work.(The description and specifications of all electrical items shall conform to the relevant specifications prescribed by the Electrical Division.) |
| 63 | Providing, supplying and fixing horizontal Zebra blinds with alternate sheer and solid fabric strips for adjustable light filtration, including headrail, operating mechanism, brackets, mounting accessories, necessary fittings and labour charges, complete in all respects as per approved specifications and directions of the Engineer-in-Charge, including all materials and labour required for execution of the work. size 3 × 1.8 × 1.8. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender