Tender For Construction Of Prefab Room - Bungalow No. Vip 5 At Wazarat Road, Jammu.
Tender Value
4.85 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
0 days left
EMD
9700
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Prefab Room - Bungalow No. Vip 5 At Wazarat Road, Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing of prefabricated structure made up of structural steel and polyurethane foam panels in walls with attached general washroom on ground floor. The prefabricated double storey structure shall be made up of structural steel and PUF panels, prepainted coloured profile steel sheets with all design parameters in compliance to all relevant latest codes of design for steel and concrete structure and shall be inclusive of all sub items given below:- The main and partition walls shall be made up of 50mm thick polyurethane foam panels which shall consists of wall panels manufactured in sandwich panel system using two nos. of precast/precoloured steel profile sheets of 0.50mm thickness fitted with 50mm thick insulation of Polyurethane foam (Density 40 KG + 2 kg/cum). The wall panels will be provided with tongue and grooves joint and will be cam lock system for interlocking. All materials required for the manufacture of shelter will be new and shall comply with relevant Bureau of Indian Standard Specifications. The brand of PUF wall panels shall be got approved by the E.I.C. Windows and Ventilators :- Windows shall be made up of three track powder coated Aluminium Sliding window (of minimum 10 gauge sections having 5 mm thick float glass panes fixed on two leaves and one leaf shall be provided with fixed flyproofing using stainless steel mesh of 1.5 mm aperture). Doors/Shutters :- 35 mm Thick flush door shutters with necessary locking arrangement of approved brand godrej/Harrison stainless steel towerbolts, handles shall be provided with appropriate 10 gauge Aluminium profile sections including all necessary fittings and fixtures.. False Ceiling :- Providing and Fixing of false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from MS sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277. The ceiling system is to be fixed to the concealed GI frame work which shall be suspended from the truss member/ roof with all necessary arrangements. The false ceiling shall be made up of calcium silicate /gypsum board tiles of size 600 x 600 mm and 8 mm thick with provision for lights. The roofing shall be provided with 0.5 mm thick pre coated steel profile sheets supposed on purlins/designed steel structural truss with provision of adequate rain water drain/pipes. The minimum projection all around the roof should be 600mm. The sheets shall be fixed using hot dip zinc coated self drilling hexagonal washer head fasteners. The steel sheet shall be laid with minimum end and side lap of 150mm. Eaves boarding of 150mm height shall be provided with necessary frame work all around the roof structure. Eaves boarding and soffit shall be provided with ACP sheet 4mm thick over necessary frame work. Cable End:- Cable end will be covered with same PUF panels as of wall upto bottom chord of truss. The triangular truss portion shall be covered with 0.50 mm thick precoated steel profile sheets. Sunshades:- Suitable sunshades made out of prepainted coloured steel profile sheets with angle iron frames shall be provided to the external windows. The minimum projection of sunshaded shall be 450mm and 300 mm wider than the width of the opening.. Under flooring :- The plain cement concrete 1:4:8 mix 100 mm thick shall be laid using crushed stone aggregate of 40mm nominal size. Cement concrete flooring 50mm thick shall be provided using cement concrete 1:2:4 mix. All steel members will be provided with 2 coats of red oxide zinc chromate primer before fabrication. The complete cement concrete flooring of 1:2:4 mix, electrification, painting work whenever required and internal sanitary works as required and approved by Engineer in charge shall be provided. Fasteners and Fittings :- The fastners and fittings for prefabricated structure shall be as per approved/vetted structural design and shall conform to relevant specifications. Finishes :- All structural steel member shall be applied two coats of red oxide zinc chromate steel primer of approved brand and thereafter shall be painted with two coats of synthetic enamel paint. |
| 2 | Labour engaged for cleaning of roof for preparing the surface for construction. |
| 3 | 9999.4179140 Providing and laying vitrified full body floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete : Size of tile : 600 x 1200 mm. |
| 4 | 12mm Cement plaster of mix:13.1.1 1 : 4 ( 1 cement : 4 fine sand) |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in :6.1.4 Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 6 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:4.4.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 8 | Site clearance after completion of work by engaging labour |
| 9 | Providing and fixing factory made uPVC white colour casement/casement cumfixed glazed windows comprising of uPVC multi-chambered frame, sash andmullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extrudedglazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304grade) friction hinges, zinc alloy (white powder coated) casement handles, G.Ifasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.9.149A.2 Casement window double panels with S.S. friction hinges (300x 19x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm &mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and singleglazing bead of appropriate dimension. (Area of window above 0.75sqmupto1.50 sqm). |
| 10 | Providing and fixing of 19mm thick ply of approved quality and make including necessary fittings, fixtures etc. complete |
| 11 | Providing and fixing of 1mm thick mica of approved quality and make including necessary fittings, fixtures, adhesive etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender