Tender For Repair & Renovation Of District Information Office Garage Building Bus Stand Poonch For Establishment Of The Office Of Centre Of Excellence For E-Goverence(Cse),District Poonch (Under Untied)
Tender Value
5 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
4 days left
EMD
10000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Renovation Of District Information Office Garage Building Bus Stand Poonch For Establishment Of The Office Of Centre Of Excellence For E-Goverence(Cse),District Poonch (Under Untied)
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead .With cement mortar 1:4 (1 cement : 4 coarse sand) |
| 2 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 3 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 4 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete.50 mm thick with 20mm nominal size stone aggregate |
| 5 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 6 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood |
| 7 | Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class teak wood |
| 8 | Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). 5.0mm thick instead of 4 mm thick |
| 9 | Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class Kail wood |
| 10 | Dumping stone including cost of stones. On Horizontal on level. |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 12 | Providing and fixing 35mm thick ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st classhard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 13 | Taking out existing wooden door shutter, repair by cutting, painting etc.and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 15 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 16 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 17 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 18 | Extra for brick work with common burnt clay bricks/ cement concrete bricks in superstructure above plinth level upto floor five level |
| 19 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10mm |
| 20 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm |
| 21 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm |
| 22 | Providing and fixing brass curtain rods of wall thickness 1.25 mmwith two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 20 mm diameter. |
| 23 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm |
| 24 | Providing and fixing of blind curtain Roller/Vertical/Venetian type as approved of good quality/fabric/material complete with all acessories including brackets channel complete job |
| 25 | Carriage of material by M.T incl loading/unloading & stacking complete |
| 26 | Bricks for an avg. lead 220 km by MT |
| 27 | Sand/Stone agg. below 40 mm nominal size avg. lead 10Km by MT |
| 28 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 29 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 30 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work-exposed on wall with clamps at 1.00 meterspacing |
| 31 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 32 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 33 | Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete: White solid plastic seat with lid. |
| 34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 35 | Providing and fixing following PVC fitting of appeoved quality as vectus or price |
| 36 | PVC Pipe 100mm dia |
| 37 | PVC Pipe 65mm dia |
| 38 | Floor Trap 65mm x100mm dia |
| 39 | P Trap 100mm |
| 40 | PVC Plane band 100mm |
| 41 | PVC P band 65mm |
| 42 | W Cuppling |
| 43 | Providing and fixing following C.P fitting of approved quality |
| 44 | 15mm long niose CP bib Cock |
| 45 | Supply and fixing of CP Short body |
| 46 | Supply and fixing of Grating lock plane |
| 47 | Supply and fixing of Grating lock hole |
| 48 | Supply and fixing angle valve |
| 49 | Supply and fixing CP nipple 1/2\\" |
| 50 | Supply and fixing CP nipple 1\\" |
| 51 | Supply and fixing PVC connection |
| 52 | Supply and fixing waste pipe |
| 53 | Supply and fixing BAL Bal 32mm |
| 54 | Supply and fixing union 32mm |
| 55 | Supply and fixing union 25mm |
| 56 | Supply and fixing full thread nipple (Tank Nipple) union 15mm |
| 57 | Wiring for light point\fan [point\call bell point with 1.5 sq. mm. FRLS PVC insulated copper conductor singel core casbel in furface \recessed medum class pvc conduit with modular switch , modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper comnductor singel cabel etc as req. |
| 58 | Wiring for light\power plug with 4x4 sq. mm FRLS PVC insulated copper conductor singel core cabel in su8rface\recessed medum class PVC conduit aslong with 1 no. 4 sq. mm. PVC FRLS insulated copper conductor singel core cabel in for looping earthing as req. |
| 59 | Supply and fixing suiutable size of GI box with modular plate and cover in forent of surface or in recess,including providing and fixing 2 nos. 5/6 A modular socket outlet and 2 nos. 5/6 A modular swuitch, ,connection etc as rwq. (for light plug to be used in non residential buldings) |
| 60 | Supply and fixing suiutable size of GI box with modular plate and cover in forent of surface or in recess,including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular swuitch, ,connection etc as rwq. |
| 61 | Wiring for cicuit/ submain wirring alongwith earth wire with the following size of FRLS PVC insulated copper conductor 'singel core cabel in surfacr/ recessed medum class PVC conduit as req.1X1.5 Sq mm |
| 62 | Wiring for cicuit/ submain wirring along with earth wire with the following size of FRLS PVC insulated copper conductor 'singel core cabel in surfacr/ recessed medum class PVC conduit as req |
| 63 | 5/6 amp switch |
| 64 | 15/16 A switch |
| 65 | 3 pin 5/6 A socket outlet |
| 66 | 6 pin 15/16 A socket outlet |
| 67 | Supply and fixing two module steped type electronic fan regulator on exisiting modular plate switch box including connection bu excluding modular plate etc as req. |
| 68 | Supply and fixing modular blanking plate on exisiting modular plate & switch box excluding modular plate as req. |
| 69 | Supply and fixing following size/mudler, GI box alongwith modular base and cover plate for modular switch in in recess etc. as req. |
| 70 | 3 module (100mmx75mm) |
| 71 | 4 module(125mmx75mm) |
| 72 | Supply and fixing 5 A to 32 A rating, 240/415 V, 10 KA, ''C'' curve ,miniature circuit breaker suitable for inductive load of following pole in exisiting MCB DB complete with connection, teasting and commessoning etc. as req. |
| 73 | Single pole |
| 74 | Single pole and neutral |
| 75 | Supply and fixing of following electrical items as req |
| 76 | 9/12 W LED consiled light |
| 77 | Celling fan 1200 mm swip alongwith rod upto 2'long as req. |
| 78 | Supply and laying aluminium wire 25.0 sq. mm from main pole to DB Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender