Tender For General-Maintenance Work (One Year Maintenance) To Various Buildings That Comes Under The Asset Of Pwd Building Section, Kanhangad-Electrification-General Electrical Work
Tender Value
84711
Estimated cost
Bid Submission
03 Nov 2026
3 days left
EMD
2118
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kasaragod → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Maintenance Work (One Year Maintenance) To Various Buildings That Comes Under The Asset Of Pwd Building Section, Kanhangad-Electrification-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | Electrification |
| 2 | OD42141/2026-2027:Disconnect all electric connections from the motor ,lifting the vertical submersible motor from open well and remove the pipe fittings and kept the motor at safe place , checking and testing the stator and rotor winding ,power up to 15 HP |
| 3 | OD41127/2026-2027:Loading the 15 HP motor from pump house to the nearest road side,loading in to the vehicle and transporting to the nearest workshop including charges for loading and unloading etc. |
| 4 | OD42143/2026-2027:Dismantling the 15 HP vertical submersible motor into stator and rotor, cleaning the windings for better working performence, varnishing the coils with best quality insulation varnish, cleaning and greasing the bearings with good quality grease, heating the windings, reassembling, test running , cleaning and painting with enamel paint. |
| 5 | OD41202/2026-2027:Shaft boring of the 15Hp motor ,checking and resetting the unit in good condition. |
| 6 | OD41239/2026-2027:Supply and changing the damaged Ball bearing of 15 HP motor |
| 7 | OD41267/2026-2027:Supply and renewal of coupling bush for 15 hp motor pumpset |
| 8 | OD41274/2026-2027:Loading the 15 HP Submersible motor from work shop to the nearest road side,loading in to the vehicle and transporting to the Pump house including charges for loading and unloading etc. |
| 9 | OD41390/2026-2027:Refit the hose caller, fitting the new HDPE pipe and tightening the eye bolt with two layer of nylon rope and connect the electrical connection to motor and testing the motor. |
| 10 | OD41407/2026-2027:Supply and changing Over load Relay |
| 11 | OD42113/2026-2027:Supply and changing damaged cooling fan |
| 12 | 90.3.21.3:Supply & installation of light fittings on 'C/U' shaped flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture |
| 13 | 90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture |
| 14 | OD122698/2026-2027:Supply, conveyance, installation, testing and commissioning of cast aluminium stove enameled elliptical shaped bulk head fittings directly on wall including cutting necessary holes, giving connections with the extended orginal wiring, making good the damgaes, colour washing etc as required. |
| 15 | 1.34:Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 16 | OD54571/2026-2027:Supply and providing the following types and power rated lamps in the existingfittings as required. B22 LED bulb 9W |
| 17 | 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply |
| 18 | OD54570/2026-2027:Supply installation, testing and commissioning of 2.25mfd fan capacitor Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender