Tender For Construction Of 75 Mtr. Wide Road Between Sector- 8B And 8A , Yeida.
Tender Value
8.40 Crore
Estimated cost
Bid Submission
13 Nov 2026
15 days left
EMD
16.80 Lakhs
Bank guarantee accepted
Document Fee
6770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 75 Mtr. Wide Road Between Sector- 8B And 8A , Yeida.
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning jungle including uprooting of rank vegetation grass brush wood ,trees & saplings of grith up to 30 cm measured at a height of 1m above G.L and removal of rubbish up to a distance of 50m out side the periphery of the area cleared(UPPWD SOR-2020/259/1 |
| 2 | Supplying and laying of good earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, |
| 3 | All Leads. UPPWD/AR-301 |
| 4 | Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). (DAR-2018/16.2/Based on UPPWD/SOR-2020) |
| 5 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. (DAR-2018/16.4/Based on UPPWD/SOR-2020) |
| 6 | Granular sub-base with close graded A, plant mix methodConstruction of granular sub-base by providing close graded material, mixing in mechanical mix plant at OMC, carriage of mixed material to work at motar grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for grade-1 material (MORTH/(AR/YEIDA) |
| 7 | Royality for Granular sub-base with close graded A, plant mix methodConstruction of granular sub-base by providing close graded material, mixing in mechanical mix plant at OMC, carriage of mixed material to work at motar grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for grade-1 material (MORTH/(AR/YEIDA) |
| 8 | Wet mix macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam precification including premixing the material with water OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Technical Specification Clause 406 of MORTH/(AR/YEIDA) |
| 9 | Royality for Wet mix macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam precification including premixing the material with water OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Technical Specification Clause 406 of MORTH/(AR/YEIDA) |
| 10 | Providing and Applying Primer Coat with bitumen VG-10 on prepared surface of granular base including clearing of road surface and spraying primer at the rate 0.70 kg/SQM using mechanical means. (MORTH/A.R./YEIDA/Based on UPPWD/SOR-2020) |
| 11 | Providing and applying Tack coat on prepared surface heating bitumen in boiler and spraying the bitumen of 80/100 with spray set fitted on bitumen boiler including clearing, preparing the existing road surface as per specification (MORTH/A.R./YEIDA/Based on UPPWD/SOR-2020) |
| 12 | On granular base such as WBM and WMM surface with 2.50Kg of bitumen for 10Sqm |
| 13 | Providing, laying & rolling of close graded premix surfacing material of 20mm thickness composed of 11.2mm to 0.09mm (Type-a) or 13.20mm to 0.09mm (Type-b) aggregates using penetration grade bitumen CRMB-55 to the required line grade and level to same as wearing course on a previously prepared base, including mixing in a suitable plant laying and rolling with a smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade. (MORTH/A.R./YEIDA/Based on UPPWD/SOR-2020) |
| 14 | 20mm compacted thickness with bitumen penetration of CRMB-55 |
| 15 | Royality for Providing, laying & rolling of close graded premix surfacing material of 20mm thickness composed of 11.2mm to 0.09mm (Type-a) or 13.20mm to 0.09mm (Type-b) aggregates using penetration grade bitumen CRMB-55 to the required line grade and level to same as wearing course on a previously prepared base, including mixing in a suitable plant laying and rolling with a smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade. (MORTH/A.R./YEIDA/Based on UPPWD/SOR-2020) |
| 16 | Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With bricks of class designation-150 (DAR-2018/16.7.1/Based on UPPWD/SOR-2020) |
| 17 | Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/281 |
| 18 | M-150 brick work in 1:4 one cement and four course sand 2.20 F.M. mortar in foundation and plinth including supply of all material, labour, T&P etc. required for proper completion of the work. (UPPWD/SOR-2020/305(a) |
| 19 | 12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) |
| 20 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) |
| 21 | White washing with lime to give an even shade : New work (three or more coats |
| 22 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in- charge and accordance with applicable specifications. |
| 23 | Five Year Maintenance of Road Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender