Tender For Overhauling Of 2 Nos Rah, Repair Of 100 Nos H.E/I.E/C.E Baskets Including Its Frame & Re-Setting Of Fins Of Baskets Ofrah Of 250Mw, Unit-7, Ptps, Panipat During Major Overhauling
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Nov 2026
9 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panipat → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Overhauling Of 2 Nos Rah, Repair Of 100 Nos H.E/I.E/C.E Baskets Including Its Frame & Re-Setting Of Fins Of Baskets Ofrah Of 250Mw, Unit-7, Ptps, Panipat During Major Overhauling
BOQ
| Sl. No. | Item Description |
| 1 | Overhauling of 2 nos. of RAHs as per scope of work of Annexure-B(Item No.-A, Part no.-1.01) |
| 2 | Repair of 100 No’s H.E/I.E/C.E baskets including its frame & Re-setting of fins of RAH baskets as per scope of work of Annexure-B,(Item No.-A, Part no.-1.02) |
| 3 | Repair of RAH H.E/I.E/C.E baskets including its frame & Re-setting of fins |
| 4 | Cleaning of Hot End/Intermediate End/Cold End basket |
| 5 | Replacement of Hot end/Intermediate end basket |
| 6 | Replacement of cold end basket |
| 7 | Reversal of H.E/I.E/C.E basket |
| 8 | Patch work of duct |
| 9 | Replacement of gratings of cold end baskets. (One set of grating = 12 Nos.) |
| 10 | Replacement of diaphragm plates and stay plates in hot end, intermediate end & cold end of RAH and replacement of same as per site requirement. Proper alignment of diaphragm plates & stay plates after repair is in the scope of contractor (One set of Diaphragm=24 Nos. & One Set of Stay plates of 5 No’s different sizes =60 Nos.) |
| 11 | Replacement of overrun clutch |
| 12 | Replacement, proper setting and alignment of hot end T-bar for one no. RAH |
| 13 | Replacement, proper setting & alignment of rotor angle for cold end / hot end. |
| 14 | Replacement, proper setting and alignment of cold end T-bar |
| 15 | Replacement of bypass angle, proper setting and alignment for cold end / hot end. |
| 16 | Servicing of actuator & gearbox of gates / dampers |
| 17 | Servicing of inlet & outlet damper of RAH |
| 18 | Replacement of Guide Bearing |
| 19 | Running welding of Ducting |
| 20 | Replacement of duct support pipes |
| 21 | Repair of damaged metallic Exp. Bellow of RAH |
| 22 | Replacement of Foundation bolts of sector plates (Main Pedestal and Axial Seal plate Assembly) of RAH-7A&7B (1 Set=Screw Hex M16X125 with nut M16, 8 No’s., Adjuster sleeve assembly-16 No’s., Tube of dia.34.2X3.25,L-175-16 No’s, Washer plain-16 No’s & Washer MCD 24-16No’s.) |
| 23 | Man hour rates (including T&P gas, consumables etc.) for Skilled labour/ welder |
| 24 | Man hour rates (including T&P gas, consumables etc.) for Semi-Skilled labour/ welder |
| 25 | Man hour rates (including T&P gas, consumables etc.) for Un-Skilled labour/ welder Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender