Tender For Provn Of Drone Protection Nets For Blast Pens At Af Stn Suratgarh Under Ge (Af) Suratgarh
Tender Value
72.80 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
13 days left
EMD
1.34 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Drone Protection Nets For Blast Pens At Af Stn Suratgarh Under Ge (Af) Suratgarh
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for, complete all as specified and as directed. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5m, in all kind of soil, complete all as specified and as directed by Engineer-in-charge. |
| 3 | M&L for Cement concrete type D-2 1:4:8 (40mm aggregate) in foundation, filling and mass concrete, complete all as specified and as directed. |
| 4 | M&L for PCC 1:2:4 type B-1 using 12.50 mm graded stone aggregate as in bed plates, concrete surfaces, water trough and like incl. rounded or chamfered on edges complete all a specified and directed. |
| 5 | S&F for MS work in tubular trusses (framed), purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) etc, complete including necessary cutting, welding, fabrication and erection Machine hydraulic bending etc complete using ERW pipes or induction butt welded tubes, confirming to IS 1161-1998 YSt-240, complete all as specified and directed. |
| 6 | M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, concrete surfaces, water trough and like incl. rounded or chamfered on edges confirming to Fe410- W (Gde-E-250) quality-A , complete all as specified and directed. |
| 7 | S & F for Bands, straps, supports or stays for columns, including bolts, if required: hooks(stay), hook and clamps; hold fasts; wall ties; hooks for conforming to Fe-290 Gde -E-165, complete all as specified and directed. |
| 8 | S& F Mild Steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewished, but length of bolt exc 30cm long. Diameter of neck 20mm. |
| 9 | M&L for preparing new Treated / Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic Enamel Paint (First quality) over a coat of red oxide zinc chrome primer, complete all as specified and as directed. |
| 10 | S&F nylon net woven out of nylon thread (virgin quality) of 3mm dia and size of mesh 25mm, UV stabilized multi filament with tying rope attached, as in drone protection, complete all as specified and directed. |
| 11 | M & L for track roller with hooks, No. of hooks shall be 2 Nos per assembly with end stops, to accommodate heavy duty nylon net and hook of load carrying capacity of 10 kg per hook including provision for tying and fixing of nylon net. Complete all as specified and directed by Engr-in-charge. |
| 12 | M&L for fixing stainless steel flush mount, flush type hook of size 10mm dia including core cutting into concrete floor and making good with PQC surface as specified and directed by Engr-in-charge. |
| 13 | S&F of 12.50mm dia nylon rope woven to border and hem of nylon wire mesh for fixing of nylon net with of frames, complete all as specified and as directed by Engr-in-charge. |
| 14 | M&L for design mix M-25 (20mm aggregate) Foundations, including rafts, footings, foundation beams ; plinth beams; bases for columns, etc; basement slabs and mass concrete, complete all as specified and directed by Engr-in-charge. |
| 15 | M&L for TMT bars 10mm dia and over, cut to length , bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 410 -w or E-250, complete all as specified and directed by Engr-in-charge. |
| 16 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, sides and soffits (if any) of foundation and similar work; vertical or to batter, complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender