Tender For Repair/Replacement Of Paths, Hardstandings, Fencing And Boundary Walls In Officers Accommodation Under Age B/R-Ii At Itarana Cantt, Alwar.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Paths, Hardstandings, Fencing And Boundary Walls In Officers Accommodation Under Age B/R-Ii At Itarana Cantt, Alwar.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for dismantling existing fencing of any description including chain-link fencing, barbed-wire fencing etc., carefully taking down fencing material, line wires, binding wires and other attachments, sorting and stacking serviceable materials and removing unserviceable materials to place as directed, complete all as specified and directed. |
| 2 | M&L for dismantling existing posts/struts of steel/RCC/wood and rafters/purlins of any description, including carefully taking out embedded portions, making good disturbed surfaces, sorting and stacking recovered materials at place as directed, complete all as specified and directed. |
| 3 | M&L for taking down existing cement or cement-lime plaster of any description from brick/stone masonry surfaces, including raking out joints, hacking surfaces for key, scrubbing down with water and preparing surface for receiving new treatment, complete all as specified and directed. |
| 4 | M&L for demolition of existing brick/stone/boulder masonry built in cement mortar or cement-lime mortar, including sorting, cleaning and stacking serviceable bricks/stones for reuse and removing debris/unserviceable material to place as directed, complete all as specified and directed. |
| 5 | M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for, including cutting where necessary, carefully taking down, sorting and stacking recovered material at place as directed, complete all as specified and directed. |
| 6 | M&L for demolition of cement concrete, unreinforced, in ground floor and paving n exc 150 mm thick, below or above ground level, including breaking, getting out and disposal of debris as directed, complete all as specified and directed. |
| 7 | M&L for demolition of reinforced cement concrete of any description and in any position, including cutting reinforcement as required to facilitate demolition, getting out demolished material and stacking recovered reinforcement separately, complete all as specified and directed. |
| 8 | M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius exc 6 metre, in old-type brick-thick walls, built in cement mortar 1:6, including necessary scaffolding, raking out joints where required and curing, complete all as specified and directed. |
| 9 | All as per preceding item but except bricks, using old serviceable bricks recovered from demolition, including cleaning, sorting, conveying and incorporating the same in the work, complete all as specified and directed. |
| 10 | M&L for brickwork with fly ash bricks, modular type, straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:6, including necessary scaffolding and curing, complete all as specified and directed. |
| 11 | M&L for half-brick thick wall with sub-class 'B' bricks, straight or curved to any radius, built in cement mortar 1:4, including necessary scaffolding and curing, complete all as specified and directed. |
| 12 | All as per preceding item but except bricks, using old serviceable bricks recovered from demolition, including cleaning, sorting, conveying and incorporating the same in the work, complete all as specified and directed. |
| 13 | M&L for walling in random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified and directed. |
| 14 | All as per preceding item but except stone, using old serviceable stone recovered from demolition, including sorting, cleaning, conveying and incorporating the same in the work, complete all as specified and directed. |
| 15 | M&L for rendering 15 mm thick in cement mortar 1:4 on brick/stone masonry surfaces, rendering finished even and smooth without using extra cement, including preparation of surface, scaffolding and curing, complete all as specified and directed. |
| 16 | M&L for rendering 15 mm thick in cement mortar 1:6 on brick/stone masonry surfaces, rendering finished even and smooth without using extra cement, including preparation of surface, scaffolding and curing, complete all as specified and directed. |
| 17 | M&L for flush pointing in cement mortar 1:3 to random or polygonal rubble masonry, uncoursed or brought up to courses, including raking out existing joints, cleaning, wetting and finishing, complete all as specified and directed. |
| 18 | M&L for excavation in post holes in soft/loose soil, each n exc 0.50 Cum, getting out excavated material, returning, filling in and ramming earth or broken rubble mixed with earth around posts in layers n exc 250 mm, watering and removing surplus soil to a distance n exc 50 metre, complete all as specified and directed. |
| 19 | M&L for PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate in foundations, filling/mass concrete including in post holes, complete all as specified and directed. |
| 20 | S&F mild steel hand rails, half-round or other stock sections or core for wooden handrails in straight portions, drilled and countersunk for balusters/running bars, including bars for doors, balusters and nosing to steps; wind ties for roofs; securing bolts, posts and struts in fencing; cutting tops to shape, drilling/notching for wire; flat-iron fillets for securing wire mesh and similar work, including all necessary drilling, bolting, riveting, embedding in concrete and fixing, conforming to Fe-290 Grade E-165, complete all as specified and directed. |
| 21 | M&L for mild steel screwed bolts, machine-made, with hexagonal or square heads at one end and screwed at the other or screwed at both ends, each screwed end fitted with washer and one hexagonal/square nut, length exc 50 mm but n exc 100 mm and neck dia n less than 11 mm and n exc 15 mm, complete all as specified and directed. |
| 22 | S&F mild steel round bars as line bars for fixing chain-link fencing, including cutting to required lengths, drilling/welding where required and fixing complete all as specified and directed. |
| 23 | Supply only MS galvanised chain-link fencing of required mesh size, fabricated from 4 mm dia galvanised steel wire, complete all as specified and directed. |
| 24 | Fixing only chain-link fencing of any mesh, size and type, including line wire, standard rails, straining bolts and provision of binding wire, properly stretched, strained and secured complete all as specified and directed. |
| 25 | S&F welded steel wire fabric, weight n exc 4 Kg per Sqm, fixed complete to wood or steel members, including necessary tying/fixing accessories, complete all as specified and directed. |
| 26 | All as per item hereinbefore but fixing only, complete all as specified and directed. |
| 27 | M&L for refixing/reusing old serviceable mild steel round bars and flat iron recovered from dismantled fencing, including sorting, straightening, cleaning, cutting where necessary and refixing in position complete all as specified and directed. |
| 28 | S&F galvanised two-strand steel barbed wire, 2.24 mm dia, barbed with 2 mm dia barbs at 75 mm spacing, strained and fixed to any type of standard rails/straining bolts, including securing/tying at crossings and providing galvanised mild steel wire, staples or steel pins etc., complete all as specified and directed. Note: Each line of barbed wire shall be measured separately. |
| 29 | M&L for restraining and resecuring existing loose barbed wire, including tightening to proper tension and making good/providing necessary staples, ties and minor fixing accessories, complete all as specified and directed. |
| 30 | M&L for restraining and resecuring existing loose/bent chain-link fencing, including straightening, stretching, tightening and making good necessary ties, binding wire and minor fixing accessories, complete all as specified and directed. |
| 31 | M&L for refixing/resecuring and re-erecting existing displaced/bent angle iron fencing posts in correct line, level and plumb, including carefully demolishing existing PCC around posts and providing PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate in foundations/post holes, including straightening of posts where required, making good disturbed surfaces and disposal of debris, complete all as specified and directed. |
| 32 | M&L for clearing site/area including cutting and removing bushes, shrubs, rank vegetation and other unwanted growth, grubbing up roots where required, collecting and removing rubbish/debris and making good and levelling the site, complete all as specified and directed. |
| 33 | M&L for framed mild steel work as in doors, gates, frames, cooler stands and similar work, prepared for hanging or sliding, including hooks, hinges or steel hanging-door fittings, fastening, fixing, welding, drilling and all necessary workmanship, but excluding steel or other covering, running rails and guides, conforming to Fe-290 Grade E-165, complete all as specified and directed. |
| 34 | M&L for mild steel framed work such as grills, gratings, framed guard bars, barred iron doors, stops and similar work, with ends of bars shouldered and/or riveted or forged into spikes, including cutting, welding, drilling, riveting, fastening and fixing, conforming to Fe-290 Grade E-165, complete all as specified and directed. |
| 35 | S&F steelwork in tubular trusses including cutting, fabricating, welding, drilling, erection and providing special-shaped washers, bolts, nuts and other necessary accessories, using ERW or induction butt-welded steel tubes, fixed complete all as specified and directed. |
| 36 | S&F 75 mm thick steel fibre reinforced concrete (SFRC) manhole cover with matching frame, medium duty, square/rectangular/circular as required, conforming to IS 12592 and having minimum load-bearing capacity as specified, including bedding, setting frame true to line and level and making good disturbed surfaces, complete all as specified and directed. |
| 37 | M&L for precast cement concrete Type B-0 (1:2:4) using 12.5 mm graded stone aggregate, louvres and jallies, 40 mm thick, measured solid, including all mouldings, casting, curing, handling and fixing in position, but excluding precast frame which shall be measured and paid separately under the respective item, complete all as specified and directed. |
| 38 | M&L for rough-cast plaster to exterior wall surfaces comprising undercoat of cement mortar 1:3, n less than 10 mm thick, and while still in plastic state applying rough-cast mixture consisting of crushed stone/fine gravel aggregate of size 6 to 12 mm, coarse sand and cement in the proportion 1:1:1, thoroughly mixed to ensure complete coating of aggregate and finished uniformly, including preparation of surface, scaffolding and curing, complete all as specified and directed. |
| 39 | M&L for preparation of existing chain-link fencing by thoroughly removing rust, loose scale and old loose paint by scraping/rubbing with wire brush and applying one coat aluminium red oxide primer followed by two coats aluminium paint, complete all as specified and directed. Note: Work shall be executed in three distinct stages, i.e. primer coat, first finishing coat and subsequent finishing coat, and each stage shall be approved by Engineer-in-Charge/GE before application of next coat. |
| 40 | M&L for preparation of newly plastered wall surfaces and applying one coat of approved primer followed by two coats of cement-based paint of approved colour and shade, including necessary surface preparation, complete all as specified and directed. |
| 41 | M&L for preparation of new steel surfaces of any description exc 100 mm in width or girth and applying one coat zinc-chromate primer followed by two coats synthetic enamel paint of approved colour and shade, complete all as specified and directed. |
| 42 | M&L for preparation of existing old painted steel surfaces exc 100 mm in width or girth by cleaning and preparing existing surface and applying one coat synthetic enamel paint of approved colour and shade, complete all as specified and directed. |
| 43 | M&L for preparation of existing old painted steel surfaces exc 100 mm in width or girth by removing rust, loose scale and defective paint by brushing/rubbing and applying two coats synthetic enamel paint of approved colour and shade, complete all as specified and directed. |
| 44 | S&F stainless steel Grade 304 letters fabricated from hollow tubes/plates to approved size, shape and design, including cutting, welding, grinding, buffing and polishing and providing necessary supporting framework, where required, fabricated from 25 mm square MS hollow section, including all fixing accessories and fixing in any position at height n exc 9 metre; exposed MS framework finished with two coats synthetic enamel paint over suitable primer, complete all as specified and directed. Note: For measurement, height of each letter shall be measured as specified. |
| 45 | M&L for providing and fixing stainless steel Grade 304 ornamental gate/railing fabricated from hollow tubes, channels, plates and other sections, including laser cutting, forming required curvature, welding, grinding, buffing and polishing, complete with stainless steel nuts, bolts, dash fasteners and all necessary fixing accessories, securely fixed to top of floor or side of waist slab with suitable arrangement, complete all as specified and directed. |
| 46 | S&F formation sign board comprising 2 mm thick acrylic lettering/signage of approved design, size and pattern with required LED illumination, fixed over 4 mm thick ACP board supported on framework fabricated from 25 mm square MS hollow section, including WPC sheet base of size 3'-0\\" x 3'-0\\", internal wiring, LED driver, fixing screws and all necessary accessories, erected and made functional complete all as specified and directed. Note: For payment purposes, size of ACP board/frame shall be measured. |
| 47 | M&L for PCC 1:4:8 Type D-2, 75 mm thick, using 40 mm graded stone aggregate, as in foundation filling/mass concrete and floor sub-base, including preparation of bed, mixing, laying, compacting, finishing and curing, complete all as specified and directed. |
| 48 | M&L for vibrator-moulded precast cement concrete interlocking paver blocks of any approved shape and size, 60 mm thick, M-35 grade, manufactured with grey cement and approved pigment and conforming to IS 15658:2006, laid to required line, level and pattern over prepared sand cushion and joints filled with dry sand, including compaction and finishing, complete all as specified and directed. |
| 49 | M&L for chequered coloured cement concrete tiles, 300 x 300 x 25 mm thick, lacquer/glossy finish, laid and jointed in neat cement slurry over 20 mm thick cement mortar screed bed 1:4 and joints pointed with white cement mixed with approved pigment to matching shade, complete all as specified and directed. |
| 50 | M&L for 12 mm thick exterior-grade textured-finish vitrified heavy-duty tiles, size 300 x 300 mm/400 x 400 mm, suitable for parking/porch areas, laid and jointed in neat cement slurry over 20 mm thick cement mortar screed bed 1:4 and joints pointed with white/coloured cement and matching pigment, complete all as specified and directed. Make: Endura Johnson or equivalent as approved by GE. |
| 51 | M&L for providing and laying at or near ground level factory-made M-25 grade precast cement concrete kerb stones to required line, level and curvature, jointed in cement mortar 1:3, including forming joints with or without grooves, thickness of joints n exc 5 mm except at sharp curves, and providing drainage openings wherever required, complete all as specified and directed. |
| 52 | M&L for dismantling existing AC/CGI/fibre cement sheets, corrugated/semi-corrugated or other profile, as in roof covering/cladding, including carefully removing fasteners and accessories, lowering, sorting and stacking serviceable sheets/material and disposing of unserviceable material as directed, complete all as specified and directed. |
| 53 | S&F pre-painted Galvalume aluminium-zinc coated GI-based corrugated steel sheet, 0.50 mm thick, of approved colour, minimum tensile strength 550 MPa, as in roof covering/wall cladding, including cutting to size, necessary laps and fixing with approved self-drilling/self-tapping screws with sealing washers and accessories, complete all as specified and directed. |
| 54 | M&L for dismantling existing floor/hearth/wall tiling, but not backing, including carefully removing serviceable tiles, cleaning and stacking the same at store/place as directed and removing rubbish/unserviceable material from premises, complete all as specified and directed. |
| 55 | M&L for 15–18 mm thick granite stone of approved type, shade and pattern, table-rubbed and polished, as in steps, jambs, pillars, window cills, cooking platforms and similar locations, set in cement mortar 1:4 and joints pointed in white cement mortar 1:2 using marble dust with approved pigment matching the granite shade, including cutting, dressing, polishing exposed edges and making necessary openings, complete all as specified and directed. |
| 56 | M&L for 600 x 300 mm, 7–8 mm thick, matt-finish glazed vitrified wall-cladding tiles, set and jointed in neat cement slurry over 10 mm thick rendering in cement mortar 1:4 and joints pointed with coloured cement to matching shade, including cutting and finishing at corners/edges, complete all as specified and directed. Make: Somany / RAK / Johnson or equivalent as approved by GE. Note: Design, colour and pattern shall be as approved/directed by Engineer-in-Charge. |
| 57 | M&L for cleaning existing drains of any size by removing accumulated silt, sludge, earth, vegetation, rubbish, debris and other obstructions, including scraping sides and bottom as necessary, restoring unobstructed flow, getting out, collecting, loading and disposing removed material at place as directed and leaving drain and surrounding area clean, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender