Tender For Repair/Maint And Poslishing To Wooden Furniture For Otm And Md Accn Under Ge (East) Delhi Cantt-10
Tender Value
49.40 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
15 days left
EMD
98820
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint And Poslishing To Wooden Furniture For Otm And Md Accn Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Notes : (1) Work will be executed where the furniture exist in different User Units/ Married Accn of GE(East) Delhi Cantt including BSO Furniture Yard as directed by Engineer-in-Charge. (2) 1st class teak wood shall be used in all timber works. |
| 2 | Chair Easy (FD-280,FD-229, FD-282, FD-279 & FD-75) |
| 3 | Replacement of unsv front leg and S&F of new leg of Chair Easy as per drg or as per directed by Engr-in-Charge. |
| 4 | Description all as per Srl item No 2.01 above but back leg. |
| 5 | Description all as per Srl item No 2.01 above but side rails of seat frame. |
| 6 | Description all as per Srl item No 2.01 above but front rails of seat frame. |
| 7 | Description all as per Srl item No. 2.01 above but back rail of seat frame. |
| 8 | Description all as per Srl item No. 2.01 above but back rest stiffener. |
| 9 | Description all as per Srl item No. 2.01 above but arm rest. |
| 10 | CHAIR WRITING |
| 11 | Replacement of unsv front leg and S&F of new leg of Chair Writing as per drg or as per directed by Engr-in-Charge. |
| 12 | Description all as per srl item No. 3.01 above but rear leg. |
| 13 | Description all as per srl item No. 3.01 above but front/back/side rail. |
| 14 | Description all as per srl item No. 3.01 above but back rest. |
| 15 | Description all as per srl item No. 3.01 above but stiffener between front leg and rear leg . |
| 16 | Description all as per srl item No. 3.01 above but stiffener for jointing to side stiffeners. |
| 17 | Description all as per srl item No.3.01 above but arm. |
| 18 | Chair Dining (FD-279) |
| 19 | Replacement of unsv front leg and S&F of new leg of Chair Dining (FD-279) as per drg or as per directed by Engr-in-Charge. |
| 20 | Description all as per Srl item No 4.01 above but back legs. |
| 21 | Description all as per Srl item No 4.01 above but side rail of seat frame. |
| 22 | Description all as per Srl item No 4.01 above but front rail of seat frame. |
| 23 | Description all as per Srl item No 4.01 above but back rail of seat frame. |
| 24 | Description all as per Srl item No 4.01 above but back rest stiffener. |
| 25 | Description all as per Srl item No 4.01 above but bottom stiffener. |
| 26 | CHAIR DINING CUSHION (FD/E6/MAP/10 R) |
| 27 | Replacement of unsv front leg and S&F of new leg of Chair Dining (FD/E6/MAP/10 R) as per drg or as per directed by Engr-in-Charge. |
| 28 | Description all as per srl item No. 5.01 above but rear leg. |
| 29 | Description all as per item No. 5.01 above but front/back/side rail. |
| 30 | Description all as per srl item No. 5.01 above but back teak wood strip of size 30x15mm of suitable length. |
| 31 | Description all as per srl item No. 5.01 above but stiffner. |
| 32 | Removing old unserviceable leatherite cover and margin cloth from the seat of the chair and S&F new tapestry cover to the seat (duly covered from all the sides incluing bottom of the chair) and of the range not less than Rs.210/- per meter. Colour, shade and quality of tapestry shall be as approved by the GE complete all as specified and directed. |
| 33 | Removing old unserviceable foam cushioned seat from existing chair dining cushioned and S&F new 75 mm thick ,32 density foam seat of (Make: Sleepwell/Featherfoam/Kurl-on )to chair dining duly covered with tapestry cover of range not less than Rs.250/- per meter, colour, shade and quality of tapestry shall be as approved by GE complete all as specified and directed. |
| 34 | Removing old unserviceable ply of seat and fixing of new seat of ply as per drg or approved by GE complete all as specified and directed. |
| 35 | S&F new wooden bracket/corners of suitable size made of Ist class hard wood teak to Chair dining cushioned and screwd with railing for extra strength including french polish complete all as directed. |
| 36 | CHAIR DINNING (JCO/ORs) (FD/MAP-II/05) |
| 37 | Replacement of unsv front leg and S&F of new leg of Chair Dining (FD/MAP-II/05) as per drg or as per directed by Engr-in-Charge. |
| 38 | Description all as per srl item No. 6.01 above but rear leg. |
| 39 | Description all as per srl item No. 6.01 above but front/back/side rail. |
| 40 | Description all as per srl item No. 6.01 above but back rest. |
| 41 | Description all as per srl item No. 6.01 above but stiffener between front leg to rear leg. |
| 42 | Description all as per srl item No. 6.01 above but stiffener for jointing to side stiffener. |
| 43 | Description all as per srl item No. 6.01 above but PVC seat incl tighting of chair. |
| 44 | S&F new wooden bracket/corners of suitable size made of Ist class hard wood teak to Chair dining cushioned and screwd with railing for extra strength including french polish complete all as directed. |
| 45 | Table Writing |
| 46 | Replacement of unsv leg and S&F of new leg of table writing as per drg or as per directed by Engr-in-Charge. |
| 47 | Description all as per srl item No. 7.01 above but top long rail. |
| 48 | Description all as per srl item No. 7.01 above but top short rail. |
| 49 | Description all as per srl item No. 7.01 above but stiffener. |
| 50 | Description all as per srl item No. 7.01 above but Table Top made out of 18/19mm thick pre-laminated exterior grade MDF board OSL (Grade I / Grade I Type I) particle board as specified and shown on drg. (Make-Kitply/ Novapan/ Green Panelmax) as per drg or as per directed by Engr-in-Charge. |
| 51 | Description all as per srl item No. 7.01 above but drawer. |
| 52 | Description all as per srl item No. 7.01 above but ply wood 3mm thick one side teak faced in front, rear and both side of table writing as per drg or as directed by Engr-in-Charge. |
| 53 | Description all as per srl item No. 7.01 above but shutter. |
| 54 | Description all as per srl item No. 7.01 above but cabinet box complete with vertical and horizental partitions made of 18/19mm thick pre-laminated exterior grade MDF board OSL (Grade I / Grade I Type I) particle board both side and back made of season teak wood (Make: Greenply/ Archidply/ Century ply) of shade approved by EIC/GE with suitable adhesive as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWR grade as per drg. |
| 55 | Description all as per srl item No. 7.01 above but cabinet door made out of 18/19mm thick pre-laminated exterior grade MDF board OSL (Grade I / Grade I Type I) particle board both side and back made of season teak wood of shade approved by EIC/GE and all as directed by GE/EIC and drg. SS Piano higes shall be used for fixing. Lock (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 56 | Peg Table (FD-277) |
| 57 | Replacement of unsv top and S&F of new top of Peg Table 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply) duly post-formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. (Make-Kitply/ Novapan/Green Panelmax) |
| 58 | Description all as per srl item No. 8.01 above but leg. |
| 59 | Description all as per srl item No. 8.01 above but Top Rail/Bottom Rail. |
| 60 | Description all as per srl item No. 8.01 above but top short rail. |
| 61 | Description all as per srl item No. 8.01 above but stiffneres. |
| 62 | Side Board (FD-241) |
| 63 | Replacement of unsv top and S&F of top of Side Board (FD-241) of 18/19mm thick pre-laminated exterior grade MDF board OSL (Grade I / Grade I Type I) particle board (Kitply/greenply/ Green Panelmax) all as specified and as shown on drgs. |
| 64 | Description all as per srl item No. 9.01 above but side. |
| 65 | Description all as per srl item No. 9.01 above but back. |
| 66 | Description all as per srl item No. 9.01 above but Top drawer. |
| 67 | Description all as per srl item No. 9.01 above but shutter. |
| 68 | Description all as per srl item No. 9.01 above but bottom. |
| 69 | Description all as per srl item No. 9.01 above but leg frame. |
| 70 | Table Dining 6 Persons (FD-30/239/ 273) |
| 71 | Replacement of unsv Top and S&F of Top of Table Dining 6 Person (FD-30/239/273) as per drg or as per directed by Engr-in-Charge. |
| 72 | Description all as per srl item No. 10.01 above but leg. |
| 73 | Description all as per srl item No. 10.01 above but long rail. |
| 74 | Description all as per srl item No. 10.01 above but short rail. |
| 75 | Description all as per srl item No. 10.01 above but stiffener. |
| 76 | S & F wooden corners made of first class hard wood teak/seasam to legs joining top rails each with 04 Nos of steel screws. |
| 77 | TABLE CENTRE FD-235/FD-274 |
| 78 | Removing of old unserviceable top from table centre and S&F new top made of 18mm thick exterior grade, ISI marked particle board duly with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. (Make:- Ecoboard /Action- Tesa / Greenply). |
| 79 | Replacement of old unserviceable leg from existing table centre and S&F the same size new leg made out of Ist class hard wood teak to Table Centre all as shown on drawing and as directed by Engineer-in-Charge. |
| 80 | Description all as per srl item No. 11.02 here-in-before but long top rail of Table centre. |
| 81 | Description all as per srl item No. 11.02 here-in-before but bottom rail of Table centre. |
| 82 | Description all as per srl item No. 11.02 here-in-before but side rail the top of table centre. |
| 83 | S&F new steel bracket/corners of suitable size to table centre with steel screws all as shown on drawing and as directed. |
| 84 | Supply and fixing including preparation of glass top of 12 mm thick (Make: Modiguard/ Swastik/ saint gobain) webling through out the all sides of glass various sizes to fix at the existing tables. Rest all as directed by Engr-In-Charge |
| 85 | TABLE DRESSING LADIES (FD/E6/MAP-II/07) |
| 86 | Drawer made out of 18mm thick exterior grade pre-laminated particle board teak faced with 04mm thick teak wood beading wherever required to the drawer all as shown on drawing and as directed. (Make:- Archid/Action- tesa / greenply). |
| 87 | Description all as per srl No 12.01 here in before but side. |
| 88 | Description all as per srl No 12.01 here in before but door shutter. |
| 89 | Description all as per srl No 12.01 here in before but looking mirror S&F of new mirror of same size. Make modi guard. |
| 90 | Steel handle/ knob as per drg and direction. |
| 91 | BED PLY WOOD TOP ( FD-246) |
| 92 | Replacement of unsv long rail and S&F new long rail as per drg or as per directed by Engr-in Charge. |
| 93 | Description all as per Srl item No 13.01 above but Stiffners. |
| 94 | Description all as per Srl item No 13.01 above but Head Rest. |
| 95 | Description all as per Srl item No 13.01 above but Foot Rest. |
| 96 | Replacement of unserviceable Top and S&F new Ply top 12 mm thick BWP marine Grade 710 (Make: Greenply/Archidply/ Century ply/ indian ply) all as per drg. |
| 97 | Replacement of UNSV Teak face ply 4 mm thick and S&F of new Teak face ply 4 mm thick (Make: Greenply/Archidply/ Century ply) in head rest as per drg. |
| 98 | Replacement of UNSV Teak face ply 4 mm thick and S&F of new Teak face ply 4 mm thick (Make: Greenply/Archidply/Century ply) in foot rest as per drg. |
| 99 | S&F of Wooden corners to be provided in shape all as directed by EIC/GE. |
| 100 | RECANNING TO DIFFERENT TYPE OF CHAIR :Recanning of following wooden chair of different type with 02mm wide cane having 03mm wide plastic cane border in godrej pattern all as shown on drg. Make shah/ aryan premier. |
| 101 | Chair dining |
| 102 | Chair writing |
| 103 | Chair easy |
| 104 | REPAIRS TO CHAIR VERANDAH (MAP) WITH ARM:- |
| 105 | S & F of new seat made from 12mm thick BWR grade ply complete with 06 Nos Nut bolt & washers duly completed with 40 density foam cushion of size 435mm x 410mm duly covered with best quality leatherite cover of DCM/Indian Handloom of approved shade and of rate ranging between Rs. 200/- to Rs. 250/- per meter and fixing the same all as per drawing and as directed. Make of Cushion :- Sleepwell / Feather-foam / Kurl-on. |
| 106 | S & F of new back made from 12mm thick BWR grade ply complete with 06 Nos Nut bolt & washers duly completed with 40 density foam cushion of size 305mm x 305mm duly covered with best quality leatherite cover of DCM/Indian Handloom of approved shade and of rate ranging between Rs. 200/- to Rs. 250/- per meter and fixing the same all as per drawing and as directed. Make of Cushion :- Sleepwell / Feather-foam / Kurl-on. |
| 107 | Hard rubber shoe/Toe best quality as per drg or as directed. |
| 108 | Welding work wherever required with FI as directed by EIC |
| 109 | Material and labour for preparing of old surface of chair verandah map steel and applying two coat of synthetic enamel black paint over a coat of primer for each chair complete all as specified and directed. |
| 110 | RECANNING TO CHAIR VERANDAH :Recanning of seat & back of chair verandah with size of 04mm thick plastic cane in Godrej pattern all as shown on drg. Make shah/ aryan & premier. |
| 111 | Material and labour for preparing of old surface of chair verandah steel and applying two coat of synthetic enamel white paint a coat of primer including provision of 4 Nos rubber shoes for each chair complete all as specified and directed. |
| 112 | Material and labour for welding to chair varandah complete all as specified and directed. |
| 113 | TEAPOY WOODEN FD-232, 278 & 382 |
| 114 | Removing of old unserviceable top from table centre and S&F new top made of 18mm thick exterior grade, ISI marked particle board duly post-formed with 0.6mm thick teak faced laminate extended upto minimum 50mm from the bottom edge and having other side white and with 02mm thick PVC edging on two short sides of the top duly fixed with strong adhesive and fixed in position all as specified and directed by Engineer-in-charge. (Make:- Ecoboard /Action- Tesa / Greenply). |
| 115 | Replacement of old unserviceable leg from existing Teapoy Wooden and supply and fixing the same size new leg made out of Ist class teak wood to teapoy wooden all as shown on drawing and as directed. |
| 116 | Description all as per srl item No. 17.02 here-in-before but top long rail of Teapoy Wooden. |
| 117 | Description all as per srl item No. 17.02 here-in-before but top side rail of Teapoy Wooden. |
| 118 | Description all as per srl item No. 17.02 here-in-before but bottom rail / stiffner of Teapoy Wooden. |
| 119 | S&F new steel bracket/corners of suitable size to Teapoy wooden with steel screws all as shown on drawing and as directed. |
| 120 | SOFA SET 5/4 SEATER |
| 121 | Replacement of unsv leg/side rail and S&F new leg/ side rail of Sofa 3 Seater as per drg or as per directed by Engr-in-Charge. |
| 122 | Replacement of unsv Arms and S&F new Arms of Sofa Set 5/4 Seater as per drg or as per directed by Engr-in-Charge. |
| 123 | Replacement of unsv front rail/back rail and S&F new front rail/back rail of Sofa 3 Seater as per drg or as per directed by Engr-in-Charge. |
| 124 | Replacement of unsv front rail/back rail and S&F new front rail/back rail of Sofa Single Seater as per drg or as per directed by Engr-in-Charge. |
| 125 | Replacement of unsv bearer/batten and S&F new bearer/batten of Sofa Set 5/4 Seater as per drg or as per directed by Engr-in-Charge. |
| 126 | Replacement of unsv back frame top/bottom and S&F new back frame top/bottom of Sofa 3 Seater as per drg or as per directed by Engr-in-Charge. |
| 127 | Replacement of unsv back frame top/bottom and S&F new back frame top/bottom of Sofa single Seater as per drg or as per directed by Engr-in-Charge. |
| 128 | S&F of Cushion for Sofa Set 5/4 seater complete with 40 density PU foam of size 22”X21”X110mm (Make:Sleepwell/ (Primocool)/ Komfort Universe (Poly Cool)) as approved by EIC/GE. |
| 129 | S&F of upholstery of tapestry cloth for cushion of Sofa Set 5/4 Seater of range not less than Rs. 450/mtr (Sample kept with BSO as approved colur, shade & quality and providing a chain best quality (at either of 21\\" side) of Make : YKK or approved quality with two runners at both ends as approved by EIC/GE. |
| 130 | S&F of Cushion with cover for stool dressing (FD/E6/MAP-II/07) PU foam (Make:Sleepwell/ (Primocool)/ Komfort Universe (Poly Cool)) alongwith base of ply of required size and dimesion as per drg or directed by Engr-in-Charge. |
| 131 | Bed Hard (FD/E6/MAP/08(R)) |
| 132 | Replacement of unsv top and S&F of new top of bed ply wood with 12 mm thick commercial plywood, BWP marine grade 710 (Make: Greenply /Archidply / Century ply), ISI marked ply fixed on the top of bed Hard steel with screws fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts complete, all as specified and shown in drawing and as directed . |
| 133 | Material and labour for welding of broken joints of Bed Hard Steel including preparation of surface complete, rest all as shown on drg and directed. |
| 134 | Material and labour in repair of head board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed. |
| 135 | Material and labour in reapir of foot board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed. |
| 136 | Material and labour in replacement of Rubber shoe and new rubber shoe of size 25mm square to be fixed as per sample |
| 137 | TABLE BED SIDE : (FD/E6/MAP/15 R) |
| 138 | Removing of old unserviceable back and S&F of new Back of 6 mm thick ply BWP grade plywood (Make: Greenply/ Archidply/ Century ply) shall be used as per shape and size shown in drg. |
| 139 | Removing of old unserviceable Top and S&F of new Top made out of 18 mm thick prelaminated particle board exterior gde (Make: Greenply/ Archidply/ Century ply) of shade approved by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC. |
| 140 | Removing of old unserviceable sides and S&F of new Sides made out of 18 mm thick prelaminated particle board exterior gde (Make: Greenply/ Archidply/ Century ply) of shade approved by EIC/GE with suitable adhesive on one side and balancing white sunmica on other side all as directed by GE/EIC. |
| 141 | Removing of old unserviceable drawer large and S&F of new Drawer Large made of 18 mm thick prelaminated particle board exterior gde and 06mm thick bottom made of ISI marked, BWR grade commercial plywood. (Make :- Archid /Action- Tesa / Greenply) as approved by EIC/GE in front, sides and complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 4\\" be provided in Drawers all as directed by GE/EIC and as per drg. |
| 142 | Removing of old unserviceable Drawer Small and S&F of new Drawer Small made of 18 mm thick prelaminated particle board exterior gde and 06mm thick bottom made of ISI marked, BWR grade commercial plywood. (Make :- Archid /Action- Tesa / Greenply)as approved by EIC/GE in front, sides and complete. Telescopic channel (Make: Hettich/Ebco/Quba) and CP Handle 4\\" be provided in Drawers all as directed by GE/EIC and as per drg. |
| 143 | Welding work wherever required as directed by EIC. |
| 144 | Removing of old unserviceable Shoe and S&F of new PVC shoe as per sample. |
| 145 | Material and labour for preparing of old surface of Table bed side map and applying two coat of synthetic enamel black paint over a coat of primer for each chair and polishing of wooden part as per direction all as specified and directed. |
| 146 | Supply and fixing including preparation of glass top of 12 mm thick (Make: Modiguard/ Swastik/ saint gobain) webling through out the all sides of glass various sizes to fix at the existing tables. Rest all as directed by Engr-In-Charge |
| 147 | Almirah Large Steel : FD-67 / 1031/MAP/18/ TP |
| 148 | Removing of old unserviceable lock and S&F of new S/S 6 lever locks (Make-Godrej/ Hettich/ Harrison/ mydas/Rina) as per drg |
| 149 | Removing of old unserviceable handle and S&F of new CP Handle as per sample/as per drg |
| 150 | Removing of old unserviceable leg and S&F of new Legs as per drg |
| 151 | Repairs to door as specified including replacement of hinges |
| 152 | Repair/adjustment to existing shelf including welding as per drg |
| 153 | Removing of old unserviceable Shutter/door and S&F of new Shutter/door as per drg. |
| 154 | Removing of old unserviceable shelves and S&F of new shelves as per drg |
| 155 | Removing of old unserviceable 3 way locking arrangement and S&F of new 3 way locking arrangement complete including MS bar |
| 156 | Almirah Medium / Small Steel: FD-1032/FD-104(M) |
| 157 | Removing of old unserviceable lock and S&F of new S/S 6 lever locks (Make-Godrej/ Hettich/ Harrison/ mydas/Rina) as per drg |
| 158 | Removing of old unserviceable handle and S&F of new CP Handle as per sample/as per drg |
| 159 | Removing of old unserviceable leg and S&F of new Legs as per drg |
| 160 | Repairs to door as specified including replacement of hinges |
| 161 | Repair/adjustment to existing shelf including welding as per drg |
| 162 | Removing of old unserviceable Shutter/door and S&F of new Shutter/door as per drg. |
| 163 | Removing of old unserviceable shelves and S&F of new shelves as per drg |
| 164 | Removing of old unserviceable 3 way locking arrangement and S&F of new 3 way locking arrangement complete including MS bar |
| 165 | Table Dressing Ladies(FD-32 (M) & FD-251) |
| 166 | Removing of old unserviceable 'D' figure mirror 5mm thick and S&F of new mirror size as per drg. Make-Atul/ Modiguard. Mirror shall be fixed in frame after providing rubber packing of required size before fixing of back ply. |
| 167 | S&F of new back ply of Mirror made out of teak wood commercial 6mm thick Make- Kit Ply/green ply after removing old unserviceable ply. |
| 168 | Removing of old unserviceable glass shutters including aluminium channel and S&F of new glass shutter including aluminium channel as shown in drawings and approved by Engineer-in-Charge. |
| 169 | Removing/ dismantling of old unserviceable shutters and S&F of new shutter/ drawer made out of teak wood commercial 12mm thick one side teak face. Make - Kit Ply/greenply. |
| 170 | Bin Linen Multipurpose FD/E6/MAP/09 |
| 171 | Replacement of unsv cabinet box and S&F of new cabinet box complete with vertical and horizental partitions made of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWP grade as per drg. |
| 172 | Replacement of unsv cabinet door and S&F of new cabinet door made out of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg. SS Piano higes shall be used for fixing. Lock (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 173 | Replacement of unsv drawer and S&F of drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers. |
| 174 | Replacement of unsv Base Frame structure and S&F of new Base Frame structure to be made complete with 25mm dia PVC shoe all as specified and as per drg. |
| 175 | Replacement of unsv Fancy Knob SS CP and S&F of Fancy Knob SS CP as per sample held in yard. |
| 176 | Spl Chair Executive revolving/ High Back/Low Back |
| 177 | S & F in repair Nylon castor wheel of chair revolving of existing size, shape and pattern of complete all as specified and directed by Engr-in-Charge. |
| 178 | S & F in repair ABS seat with moulded PU foam and tapestry cloth/leatherite of Chair revolving of existing size, shape and pattern of complete all as specified and directed by Engr-in-Charge. |
| 179 | S & F in repairs ABS back with moulded PU foam and tapestry cloth of Chair revolving of existing size, shape, pattern of complete all as specified and directed by Engr-in-Charge. |
| 180 | S & F in repair Pneumatic with complete assembly of Chair revolving of existing size, shape and pattern of complete all as specified and directed by Engr-in-Charge. |
| 181 | S & F in repair PU arms of Chair revolving of existing size, shape and pattern of complete all as specified and directed by Engr-in-Charge. |
| 182 | S & F in repair Chrome finish pedestal with nylon castor wheels of Chair revolving of existing size, shape and pattern of complete all as specified and directed by Engr-in-Charge. |
| 183 | S & F in repair Hydraulic with complete synchronising assembly of Chair revolving of existing size, shape and pattern of complete all as specified and directed by Engr-in-Charge. |
| 184 | M & L For painting two coat of hammer Tone paint with shade as approved by EIC/GE over a coat of primer through spray machiine,both internally & externally to the following furniture articles, viz F/FD/DB/MAP/TP series or similar items encluding removing of dust , dirts dents etc and existing paint both internally & exernally by applying paint removeer/scrapping with emery paper without damaging to surface, applying putty to level the surface before primer/painting all as specified and shown on dgrs and directed by Engineer-in-Charge. There will be a one day gap between every stage of painting. |
| 185 | Bed Hard (FD/E6/MAP/08(R)) |
| 186 | Almirah Large Steel : FD-67 / 1031/MAP/18/ TP |
| 187 | Almirah Medium / Small Steel: FD-1032/FD-104(M) |
| 188 | Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (b) M&L for melamine polish high gloss/mate finish with spray machine applying shellac, wood filler, shelar etc after removing of complete existing polish making surface smooth by sand paper (Emery paper) with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/ DB/ FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing incl tighting of furniture all as specified and directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. |
| 189 | Chair Easy |
| 190 | Chair Writing |
| 191 | Chair dining CB |
| 192 | Chair Dining (FD/E6/MAP/10 R) |
| 193 | CHAIR DINNING (JCO/ORs) (FD/MAP-II/05) |
| 194 | Table Writing |
| 195 | Peg Table (FD-277) |
| 196 | Table Dining 6 Persons |
| 197 | Bed Plywood |
| 198 | TEAPOY WOODEN FD-232, 278 & 382 |
| 199 | SOFA SET 5 SEATER |
| 200 | SOFA SET 4 SEATER |
| 201 | TABLE CENTRE FD-235/FD-274 |
| 202 | Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (b) polishing : Material and labour for complete removing/scrubbing the entire old polished surfaces by emery paper by manual means of the following items including preparation of old wooden surfaces by applying seina/burnt seina uniformally and filing of cavities with putty/filler and applying one or more coat of french polish with as directed in order to obtain glossy finish to the to the entire satisfaction of Engr-in-Charge incl tighting of furniture and all as directed. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. |
| 203 | Chair Easy |
| 204 | Chair Writing |
| 205 | Chair dining CB |
| 206 | Chair Dining (FD/E6/MAP/10 R) |
| 207 | CHAIR DINNING (JCO/ORs) (FD/MAP-II/05) |
| 208 | Table Writing |
| 209 | Peg Table (FD-277) |
| 210 | Side Board (FD-241) |
| 211 | Table Dining 6 Persons |
| 212 | TABLE DRESSING LADIES (FD/E6/MAP-II/07) |
| 213 | TABLE DRESSING LADIES (FD-32 (M) & FD-251) |
| 214 | Bed Plywood |
| 215 | TEAPOY WOODEN FD-232, 278 & 382 |
| 216 | SOFA SET 5 SEATER |
| 217 | SOFA SET 4 SEATER |
| 218 | TABLE CENTRE FD-235/FD-274 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender