Tender For Periodical Services To Otm And Md Accn At Jp Line, Mh, Ml Line And Pp Line Including Welcome Maintenance Services Under Age B/R-I At City Area, Alwar.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Otm And Md Accn At Jp Line, Mh, Ml Line And Pp Line Including Welcome Maintenance Services Under Age B/R-I At City Area, Alwar.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster or cement-lime plaster from PCC, stone or brick surfaces, including raking out joints, hacking for key and scrubbing down with water, complete all as specified and directed. |
| 2 | M&L for washed stone grit plaster on external walls in two layers comprising 12 mm thick under layer in CM 1:4, furrowed with scratching tool, application of cement slurry @ 3 Kg/Sqm over under layer and 15 mm thick top layer in CM 1:½:2 (1 cement : ½ coarse sand : 2 stone chippings of 10 mm nominal size), laid in panels with grooves all around to approved pattern, including scrubbing and washing top surface with brushes and water to expose stone chippings, complete all as specified and directed. |
| 3 | M&L for 5 mm thick rendering in CM 1:3 on concrete surfaces of ceilings, finished even and smooth without using extra cement, complete all as specified and directed. |
| 4 | M&L for 10 mm thick rendering in CM 1:6 on fair faces of brick masonry or concrete wall surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 5 | M&L for 15 mm thick rendering in CM 1:4 on brick/stone wall surfaces or surfaces other than fair faces of brickwork, finished even and smooth without using extra cement, including mixing integral water proofing compound complete all as specified and directed. |
| 6 | M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper of approved shade/tint over one coat of minimum 1 mm thick wall care putty, complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered wall surfaces and applying two coats of white wash, complete all as specified and directed. |
| 8 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint of approved shade/tint over one coat of suitable primer, complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered/unplastered ceiling surfaces and applying three coats of white wash, complete all as specified and directed. |
| 10 | M&L for preparation of old decorated wall surfaces by washing, rubbing down and stopping distempered surfaces and applying one coat of oil bound distemper (OBD) of approved shade/tint, complete all as specified and directed. |
| 11 | M&L for complete removal of existing treatment from wall surfaces, preparation of surfaces and applying two coats of oil bound distemper (OBD) of approved shade/tint, complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatment from old painted wall surfaces mechanically and manually at inaccessible/uneven locations, preparation of surfaces, applying minimum 1 mm thick wall care putty to obtain smooth and even surface followed by two coats of oil bound distemper (OBD) of approved shade/tint, including removal of splashes from glass panes and floors, complete all as specified and directed. |
| 13 | M&L for preparation of old decorated plastered/unplastered ceiling surfaces and applying one coat of oil bound distemper (OBD) of approved shade/tint, complete all as specified and directed. |
| 14 | M&L for preparation of old decorated plastered/unplastered wall surfaces and applying one coat of cement base paint of approved shade/tint, complete all as specified and directed. |
| 15 | M&L for preparation of old decorated plastered/unplastered wall surfaces and applying two coats of cement base paint of approved shade/tint, complete all as specified and directed. |
| 16 | M&L for preparation of old decorated plastered wall surfaces including cornices, pilasters etc. and applying one coat of white wash, complete all as specified and directed. |
| 17 | M&L for brooming down old decorated plastered/unplastered wall surfaces including cornices, pilasters etc. and applying two coats of white wash, complete all as specified and directed. |
| 18 | M&L for preparation of old decorated plastered/unplastered ceiling surfaces and applying one coat of white wash, complete all as specified and directed. |
| 19 | M&L for preparation of old painted surfaces of wood and wood-based materials of any description over 100 mm in width or girth and applying one coat of synthetic enamel paint of approved shade, complete all as specified and directed. |
| 20 | M&L for preparation of old painted steel and iron surfaces of any description over 100 mm in width or girth and applying one coat of synthetic enamel paint of approved shade, complete all as specified and directed. |
| 21 | M&L for complete removal of existing treatment from wall surfaces, preparation of surfaces and applying two coats of plastic emulsion paint of approved shade, complete all as specified and directed. |
| 22 | M&L for complete removal of existing treatment from wall surfaces mechanically and manually at inaccessible/uneven locations, preparation of surfaces, applying minimum 1 mm thick wall care putty followed by one coat of suitable primer and two coats of exterior grade emulsion/Apex paint of approved make, shade and colour, complete all as specified and directed. |
| 23 | M&L for writing letters or figures, block, Roman, italic or Indian letters, n exc 300 mm high, complete all as specified and directed. |
| 24 | Hacking out old broken glass of any thickness, size, quality or description from wooden/steel frames or stone, concrete or brick surrounds and fixing new glass with putty or beads as applicable, complete all as specified and directed. |
| 25 | S&F 3 mm thick ordinary quality sheet glass in panes n exc 0.50 Sqm each, glazed with oil putty, including painting/oiling new putty to match existing/new surfaces, complete all as specified and directed. |
| 26 | S&F 3 mm thick figured glass, pin-head type, in panes n exc 0.50 Sqm each, glazed with oil putty, including painting/oiling new putty to match existing/new surfaces, complete all as specified and directed. |
| 27 | Taking up or down steel tubing and connections, 15 mm bore, fixed to walls/ceilings or laid in floors/trenches etc., complete all as specified and directed. |
| 28 | Taking up or down steel tubing and connections, 20 mm bore, fixed to walls/ceilings or laid in floors/trenches etc., complete all as specified and directed. |
| 29 | M&L galvanised steel water tubing, medium grade, 15 mm bore, with and including all fittings, fixed complete to walls/ceilings or laid in floors, complete all as specified and directed. |
| 30 | M&L galvanised steel water tubing, medium grade, 20 mm bore, with and including all fittings, fixed complete to walls/ceilings or laid in floors, complete all as specified and directed. |
| 31 | S&F 500 litre capacity rotational moulded polyethylene water storage tank, double layered, cylindrical vertical with closed top, ISI marked, hoisted and fixed in position, including making necessary arrangements for inlet, outlet, overflow and washout connections and taking down existing water tank, complete all as specified in SSR Part-I and directed. |
| 32 | S&F 1000 litre capacity rotational moulded polyethylene water storage tank, double layered, cylindrical vertical with closed top, ISI marked, hoisted and fixed in position, including making necessary arrangements for inlet, outlet, overflow and washout connections and taking down existing water tank, complete all as specified in SSR Part-I and directed. |
| 33 | S&F in repairs high-pressure PTMT ball valve, 20 mm bore, with epoxy-coated aluminium rod and high-density plastic ball, screwed for iron pipe, minimum weight 210 grams, including taking down existing U/S fitting where required and fixing complete all as specified and directed. |
| 34 | S&F in repairs brass/gunmetal globe or gate valve, 20 mm bore, with iron wheel head, screwed at both ends for iron pipe, including taking down existing U/S fitting where required and fixing complete all as specified and directed. |
| 35 | S&F in repairs white vitreous china wash-down water closet pan, pedestal pattern, including connection to drain/outgoing pipe, flushing pipe and anti-syphonage pipe etc., complete with white plastic WC seat and cover, closed pattern with flat bottom and MS chromium-plated/aluminised hinging device, including taking down existing U/S fittings where required, complete all as specified and directed. |
| 36 | S&F in repairs PVC valveless symphonic-action type low-level flushing cistern, ISI marked, 10 litre capacity, including 32 mm dia PVC flush pipe connected to WC, inlet, ball valve, float and handle, including taking down existing U/S cistern where required, fixed complete all as specified and directed. |
| 37 | S&F in repairs PVC connection pipe, 15 mm dia and 600 mm long, complete with adaptor and washer at both ends, including taking down existing U/S connection where required, fixed complete all as specified and directed. |
| 38 | S&F in repairs white plastic WC seat and cover, closed pattern with flat bottom and MS chromium-plated/aluminium hinging device, including taking down existing U/S seat and cover, fixed complete all as specified and directed. |
| 39 | S&F in repairs brass chromium-plated wall mixer for mixing hot and cold water, screwed down, with screwed shanks and fly nuts, suitable for 15 mm bore iron pipes, including taking down existing U/S fitting where required, fixed complete all as specified and directed. |
| 40 | S&F in repairs brass chromium-plated shower rose, 100 mm size, swivel-joint type, including fixing to 15 mm bore steel pipe/union and taking down existing U/S fitting where required, complete all as specified and directed. |
| 41 | S&F in repairs kitchen sink with draining board, manufactured from 1 mm thick stainless steel sheet, overall minimum size 915 x 460 mm with bowl approximately 410 x 330 x 160 mm, complete with plugs, washers and wastes, fixed on CI cantilever brackets and bedded in cement mortar on dwarf wall, including 32 mm dia polyethylene waste pipe, 32 mm bore CP brass waste fitting with long screwed shank, fly nut and flange bedded in red lead cement, making holes for brackets and fixing in CM 1:3/PCC 1:2:4 Type B-0, including taking down existing old U/S sink, complete all as specified and directed. |
| 42 | S&F in repairs fancy type 15 mm bore bib tap of cast copper alloy, with crutch/butterfly handle, screwed down and screwed for iron pipe/brass ferrule, including taking down existing U/S tap where required, fixed complete all as specified and directed. |
| 43 | S&F in repairs 15 mm bore stop/angle valve of cast copper alloy, high-pressure type with crutch/butterfly handle, screwed down and screwed at both ends for iron pipe/unions, including taking down existing U/S fitting where required, fixed complete all as specified and directed. |
| 44 | S&F in repairs 15 mm bore two-way angle valve of cast copper alloy, high-pressure type with crutch/butterfly handle, screwed down and screwed at both ends for iron pipe/unions, including taking down existing U/S fitting where required, fixed complete all as specified and directed. |
| 45 | S&F in repairs chromium-plated cast copper alloy pillar tap, 15 mm bore, with capstan head, screwed-down high-pressure type, with or without lettered 'Hot'/'Cold', complete with long screwed shank and fly nut, including taking down existing pillar tap and removing the same to store, fixed complete all as specified and directed. |
| 46 | S&F in repairs white vitreous china wash hand basin, flat-back type, size 550 x 400 mm, fixed on and including new brackets, CP waste coupling and PVC waste pipe, including necessary connections and taking down existing U/S basin where required, complete all as specified and directed. |
| 47 | S&F in repairs white vitreous china squatting pan, Orissa pattern, size 580 x 440 mm, with integral foot rests, including connection to trap and flushing pipe, taking down existing U/S pan where required and making good disturbed floor, complete all as specified and directed. |
| 48 | S&F in repairs looking mirror, 600 x 450 mm, bevelled edge, 5.5 mm thick selected quality glass, mounted on 6 mm thick commercial plywood with aluminium frame all around and fixed to wooden plugs with CP brass screws and cup washers, including taking down existing U/S mirror where required, complete all as specified and directed. |
| 49 | S&F in repairs chromium-plated brass jet spray for EWC, complete with 900 mm long PVC flexible connection suitable for 15 mm bore GI pipe, PTMT nut and nipple, including taking down existing U/S fitting where required, fixed complete all as specified and directed. |
| 50 | S&F in repairs health faucet with ABS body and chromium-plated components, suitable for 15 mm dia pipe, complete with 1.25 metre long flexible tube and ABS wall hook, including making connections and taking down existing U/S fitting where required, fixed complete in all respects as specified and directed. |
| 51 | S&F in repairs PVC framed mirror cabinet, size 400 x 500 mm, fixed to wall with PVC rawl plugs and stainless steel screws of suitable size, including taking down existing U/S mirror cabinet where required, complete all as specified and directed. |
| 52 | S&F in repairs white vitreous china wash hand basin, size 800 x 475 mm, complete with PVC side cabinet size 240 x 140 x 975 mm, floor-mounted cabinet size 780 x 440 x 800 mm and mirror with PVC frame size 560 x 800 mm, complete with all necessary fittings and accessories, Somany Cat Part No. 10527 (Basin), 16122 (Cabinet), 170114 (Mirror), 160121 (Side Cabinet) or equivalent of Johnson/Hindware/CERA/Madhusudan Ceramic as approved by GE, including taking down existing U/S fittings where required, fixed complete all as specified and directed. |
| 53 | S&F in repairs fancy type centre-hole basin mixer without pop-up waste system but including 32 mm plain waste fitting with aerator, of cast copper alloy chromium plated, screwed-down high-pressure type, with long screwed shanks and fly nuts suitable for 15 mm bore iron pipes, including taking down existing U/S fitting where required, fixed complete all as specified and directed. |
| 54 | S&F in repairs brass chromium-plated telephonic hand shower complete with 1.50 metre long stainless steel braided flexible tube with nut, nipple and hook, suitable for wall mixer and 15 mm bore iron pipe, including taking down existing U/S fitting where required, fixed complete all as specified and directed. |
| 55 | S&F in repairs brass chromium-plated towel rack, 600 mm long, with lower hangers, Prima Collection or equivalent approved, including taking down existing U/S fitting where required, fixed complete all as specified and directed. |
| 56 | S&F in repairs PVC (SWR) pipe, 110 mm bore, single socketed, of any length with rubber ring joints, fixed to walls or laid in trenches/floors as required, including necessary jointing, fixing and testing, complete all as specified and directed. |
| 57 | S&F in repairs PVC (SWR) pipe, 75 mm bore, single socketed, of any length with rubber ring joints, fixed to walls or laid in trenches/floors as required, including necessary jointing, fixing and testing, complete all as specified and directed. |
| 58 | S&F in repairs PTMT dome grating, 100 mm dia, minimum weight 25 grams, fixed with cement mortar, including taking down existing U/S grating where required, complete all as specified and directed. |
| 59 | S&F 6 mm thick plywood, BWR Grade Type BB, fixed with screws to timber framework etc., including taking down existing boarding/framework as applicable, complete all as specified and directed. |
| 60 | S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative lamination of approved choice and balancing white lamination on reverse side, fixed with screws to timber framework etc., including taking down existing boarding/framework as applicable, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 61 | S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative lamination of approved choice and balancing white lamination on reverse side, fixed with screws to timber framework etc., including taking down existing boarding/framework as applicable, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender