Defence Statutory Bodies & Commissions/Committees Closing in 3 days TDR #58251125

Tender For special Repair To Bldg No. 22 Fbd At Ridge Road, Provision Of Shed And Chain Link Fencing At Robert Barrack And Provn Of Guard Room Near Dsoi In The Aor Of Age B/R-1 Under Ge(P) No. 1 Jabalpur

Issued by Statutory Bodies & Commissions/Committees · Jabalpur, Madhya Pradesh
Tender Value
46.76 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
93600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for special Repair To Bldg No. 22 Fbd At Ridge Road, Provision Of Shed And Chain Link Fencing At Robert Barrack And Provn Of Guard Room Near Dsoi In The Aor Of Age B/R-1 Under Ge(P) No. 1 Jabalpur

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 18-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 25-Nov-2026

BOQ

Name of Work:- SPL REPAIR TO BLDG NO. 22 FBD AT RIDGE ROAD, PROVISION OF SHED AND CHAIN LINK FENCING AT ROBERT BARRACK AND PROVN OF GUARD ROOM NEAR DSOI IN THE AOR OF AGE B/R-1 UNDER GE(P) NO. 1 JABALPUR
Sl. No. Item Description
1S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or frenchs or in walls (SWR). complete all as specified and as directed.
2S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints laid in trenches or frenchs or in walls (SWR).complete all as specified and directed.
3Taking down of eaves gutter, rain water pipes of any size or pattern including all fittings etc. complete all as specified and directed.
4S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
5S&F PVC (SWR) bends ISI marked any radius of 75 mm complete all as specified and directed
6S&F PVC (SWR) 110mm bore ,T, equal or unequal complete all as specified and directed
7Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. Including Tile Bedding layers and removing out side MD Land) complete all as specified and directed.
8M & L for cement concrete in foundations, filling and masss concrete type C2 1:3:6 (40mm graded aggregate) complete all as specified and directed.
9Excavating in trenches in any type of soil , n exc 1.5 m wide and n. exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soil complete all as specified and as directed.
10Returning, filling in, including spreading ,leveling, watering and well ramming in layers n. exc 25 cm with soil complete all as specified and as directed.
11Removal of excavated material (soil) to a distance exc 50 m n. exc 250 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.
12Supplying and laying and jointing for (SN 8) DWCPE 180mm (OD)/ 163 (ID) conforning to IS-16098:2013 part -I with and incl jointing materials complete all as specified and directed
13M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed .
14M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and directed.
15M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4).complete all as specified and as directed.
16M&L for 15mm thick rendering on any faces of stone, concrete or brick work in CM 1:4 surface finished even and fair complete all as specified and as directed. .
17M&L for 15 mm thick rendering in cement mortar (1:3) on brick / concrete/ stone surfaces mixed with water proofing compound as per manufacturer instruction , finished even and smooth using extra cement complete all as specified and as directed.
18Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (Horizontal or sloping) complete all as specified and directed.
19M&L for Precast cement concrete Type B-1 1:2:4 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and directed.
20M&L for cement concrete 1:2:4 type B1 (20 mm graded stone aggregate) as in coping complete all as specified and directed.
21M&L for Precast (factory made frame and cover)cement concrete Type B-1 1:2:4 (Using 20 mm graded stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and directed.
22S&F TMT steel bars 6 to 8mm in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and as directed.
23M&L for Brick work using old size bricks with sub class ‘B’ bricks in one brick thick honey comb walling built in cement mortar 1:4 complete all as specified and directed.
24Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
25Demolition of floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.
26M & L for cement concrete in foundations, filling and masss concrete type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed.
27M&L for vetrified paver ceremic tiles 10 mm thick, in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.
28S&F framed work such as grills, gratings,ornamental etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 incl pintle hinges stops hand made sliding bolt etc complete all as specified and directed
29Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
30M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc. complete all as specified and directed.
31Supply and fixing Concertina Coil Mild steel punched tape concertina coil with Zinc coating 450mm Ø with clips spaced 24mm dispensed in compact rolls weighing 7.5 kg/coil covering an average span of 7.5m on expansion to be laid between the 'Y' angle pickets joining by welded at 45 degree slope LAIP.complete all as specified and directed.
32Dismentling of chain link fencing wire mesh any type complete all as specified and directed.
33S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.
34M&L for Preparation of two coats of synthetic enamel paint on new steel surfaces of any description, over 10cm in width or girth,not otherwise described including preparation over a coat of red oxide Zinc chrome prime complete all as specified and directedr complete all as specified and directed.
35M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors etc set over and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
36M&L for ceramic tiles, joint free, coloured tiles 350mm x 250mm x 7mm / 350mm x 450mm x 7mm as in skirting fixed over and including 10 mm thick cement screed in (1:3) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.
37M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.
38M&L for PCC (1:2:4) type B2, (using 20 mm graded stone aggregate), as in foundations / mass concrete/ levelling course complete all as specified and directed...
39M & L Vitrified Ceramic tiles double charged (light shade)10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, but n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 20 mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed.
40M & L Vitrified Ceramic tiles double charged (light shade10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, but n exc 1.00Sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 10mm thick backing coat in CM 1:4 to recieve tiles complete all as specified and directed.
41M&L for Granite slab 16 mm to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:4) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and directed
42M&L for machine cut cuddapa stone slab 30-35 mm thick , as in platform below WHB etc complete all as specified and directed.
43Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
44M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.
45M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and fair without using extra cement complete all as specified and directed.
46M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.
47M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.
48S&F as in repair Providing precast cement concrete louvres and jallies, 35mm thick, including all mould- ings of type B0 1:4 using 12.5mm graded stone aggreate set in cement mortar 1:6 (Reinforecement shall be measured and paid separately) complete all as specified and directed
49~ditto~ all as per item No. 48 above but except Jally in cement mortar 1:6 complete all as specified and directed.
50M & L for RCC (Design mix M-25) in foundations, including, rafts, footings, foundation beams, bases for columns, etc , basement slab, under reamed piles and mass concrete complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item.
51M & L for RCC M-25 design mix as in columns , pillars, piers, posts and struts etc.complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item.
52M & L for RCC M-25 design mix as in being cantiliver, chajjas, lintels and using 20mm graded stone aggregate complete all as specifed and directedNote:- Reinforcement shall be measured and paid separately under respective item.
53M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter complete all as specified and directed.
54M&L for formwork to sides of pillars, posts, struts, piers, columns etc square or rectangular complete all as specified and directed.
55Use and waste for rough finish surfaces flate or curved Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves, chajjas including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.
56S&F TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed.
57S&F TMT steel bars 5mm dia and over, up to and including 10mm dia in stirrups spcers and binders.complete all as specified and directed.
58M&L for Brick work with Fly ash bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified and directed using old size bricks complete all as specified and directed.
59Material & Labour for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new/old work including preparation of existing wall surfaces including primer/removing of existing treatment etc complete all as specified and directed.
60Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces including preparation of existing wall surfaces (and removing existing treatment) complete all as specified and directed.
61M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand. complete all as specified and directed.
62Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
63M&L for moorum/red bajri filling in floors or paving laid in layers n. exc 15 cm thick spreading levelled and blinded with earth and rammed including watering complete all as specified and directed.
64S & F in repair Pillar taps 15mm fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed.
65S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.
66S&F in repairs white vitreous china orissa pettern of size 580mmx440 mm white with integral footrest excluding flushing cistern complete all as specified and directed.
67S&F repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device. complete all as specified and directed.
68S&F repair vitreous china urinal half stall type white excluding flushing cistern flush pipe and waste pipe all as specified and directed by Engr-in-charge. complete all as specified and directed.
69Vitreous china WHB 550x400mm including cutting pinning in end of brackets brackets , fixing flat back or angle back/oval type type with PVC (hdpe) 32 mm dia waste pipe, brass coupling 32 mm CP etc fixed in repair complete all as specified and directed.
70S&F fancy type stainless steel draphery rods with brackets 20-25mm bore including stop roller lid and knobs etc cut to length as required of colour. complete all as specified and directed.
71S & F in repair for Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed, 15 mm, fancy type, chromium plated fixed complete all as specified and directed.(Make/ sample approved by GE) Jaquar (FLR-5047N) or equivalent of Kolar, Roca
72S & F for Sheet corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.
73S&F in repair Chromium plated toilet paper holder including fixing arrangement complete all as specified and directed .(Make/ sample approved by GE) (Jaquar ACN-1131N or equivalent of Kohler, Roca)
74S & F in repair for Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed.
75S & Fin repair for fency type chromium plated Stop valves,(angle Cock) cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed , 15 mm fixed complete all as specified and directed.. (Make/ sample approved by GE) Jaquar (FLR-5047N) or equivalent of Kohler, Roca
76S & F in repair for Gun-metal, globe or gate valves, with lever head/iron wheel head, screwed both ends for iron pipe and fixed , 20 mm fixed complete all as specified and directed.
77S & F for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified and directed.
78S&F PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed.
79Taking down steel tubing and connections including cleaning for refixing or removal form site for 25mm bore pipe complete all as specified and directed.
80Taking down steel tubing and connections including cleaning for refixing or removal form site for upto 20mm bore pipe complete all as specified and directed.
81Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed.
82Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors .complete all as specified and directed.
83PVC (SWR) floor trap / Nahani trap with grating 75 mm dia incl jointing with solvent cement complete all as specified and directed.
84Taking down chowket or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed.
85~ditto~ all as per item No 84 above but exc 1.50 Sqm n.exc 4 Sqm. complete all as specified and directed.
86S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specification including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete all as specified and directed.
87S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.
88S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed.
89S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed.
90S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
91S&F 100mm long butt hinges med wt cold rolled mild steel and fixed complete all as specified and directed.
92M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)incl bitumen base primer 0.3Kg per SQM laid over primed surface by forced torch application complete all as specified and directed
93Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.complete all as specified and directed.
94M&L one or more coat of heat resistance aluminium paint over bitumen surfaces of any description wood, steel, iron, concrete,brick, stone, etc., exceeding 10cm inwidth or girth complete all as specified and directed
95Dismentaling of timber scantling as in fillets, rails posts rafters purlin etc under 40 Sqcm in section as in unframed work complete all as specified and directed
96S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position including dismentling of old tank and fixing of 20 mm float valve complete all as specified and directed.
97S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position including dismentling of old tank and fixing of 20 mm float valve complete all as specified and directed.
98Taking down and refixing existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. Incl cleaning repairing and removing dirt scale etc complete all as specified and directed (exc 500 ltr n exc 1000 Ltr) complete all as specified and directed.
99S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples beads or in steel window complete all as specified and directed.
100S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressivestrength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.
101S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressivestrength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.
102S&F for Factory made solid panel PVC door shutter 30 mm thick (style)wire gauge i.e panel will be wire gauge in lieu of single side prelam PVC sheet panel . The wire gauge shell be wrapped on an additional square 8 mm MS solid tube the wire gauge strightly and tighted firmly, suppling & fixing in the frame at site complete all as specified and directed.
103S&F for Factory made single extruded WPC (Wood Polymer Composite) solid colored/decorative flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed.
104M & L for 18mm thk lnsulated PVC Wall Lining consisting of PVC Insulated Panels with single side Prelam PVC sheet used in-stead of Plain colour sheet as in cupboard, wardrob and similar works etc work to be done at site complete all as spfd. complete all as specified and directed.
105S&F for continuous (Piano) hinge 40 mm brass bright finish or electro galvanized complete all as specified and directed.
106Dimantling of PVC fibre roof sheeting, corrugated or semi corrugated or similar pattern roof coverings complete all as specified and directed.
107Dimantling asbestos cement sheeting, corrugated or semi corrugated or similar pattern roof coverings complete all as specified and directed.
108M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.
109M& for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
110Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed works complete all as specified and directed.
111S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.
112S&F 5.5 mm thick ordinary glass and glazing with oil putty in square area exc 0.50 sqm in each pane complete all as specified and directed.
113S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standardtubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.
114S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and directed.
115Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
116S&F in repair, PVC Bath cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size.complete all as specified and directed.Make:- As per Cat No. 554 of Prayag or equivalent
117S&F Aluminium louvers with levers and locking arrangement suitable for fixing 100mm wide 4 to 6 nos glass of 5mm thick frosted 75mm wide complete all as specified and directed.
118S&F in repair Door Seal of aluminium body and brush / rubber etc, complete incl fixing screw etc length n exc 1.1 mtr each complete all as specified and directed.
119S&F in repair POP cornis of garth exc 100mm nexc 200mm shape and design as approved by Engr-in-Charge fixed to wall/ceiling with PVC rawl plug/ MS screw as required complete all as specified and directed.
120M&L for Black colour solid ACP wall lining consisting of 3mm thick plain inclusive of solvent cement /Adhesive including Alluminium frame work complete all as specified and directed.
121Dismentling of wall and ceiling board (fibre pulp insulation etc or insulation board /slab/blanket any thickness including cover fillets complete all as specified and directed.
122S&F in repair Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl 3mm dia GI wire used as hanger complete all as specified and directed
123S&F 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.
124M&L for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 34 mm X 24 mm X 0.8 mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.30 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 20 mm X 20 mm X 0.60 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 3.00 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed.
125Providing and fixing factory made cupboard shutter with 18 mm thick one side decorative and other side balancing lamination factory pressed OSL HDHMR board of Action Tesa and Equivalent including 2 mm thick PVC edge banding type with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraullic type) etc, complete made by action Tesa authorised OEM complete all as specified and directed.
126Providing and fixing factory made with 18mm thick both side balancing lamination factory made HDHMR wood of action Tesa and equivalent approved brand for boxes, shelves, racks, almirah, cupboard and drawer etc including necessary nails, screws etc, complete made by action tesa authorised OEM as per direction. complete all as specified and directed.
127Providing and fixing factory made modular wardrobe with 8 mm thick both sides pre-laminated BSB (both side balancing paper) HDHMR of action tesa and equivalent as per IS: 14587 - 1998 with suitable full threaded steel screws etc on the backing of racks drawer, cupboard, kitchen, cabinet under kitchen counter etc, all complete make by action tesa authorised OEM as per direction. complete all as specified and directed.
128S&F of ball bearing runners 45 mm telescopeic chennal 20 inch full extendion load capacity 50 kgs smooth closing after gentle push complete all as specified and directed.
129S&F of stainless steel handles 100 mm size for kitchen cabinet shutters make-Hettich ,Ebco,Prime) complete all as specified and directed.
130S&F of chrome plated stainless steel (grade 304) wire basket suitable size(Storage basket) pull out type of large utensils with multipurpose use as per site requriment with necessary fixing clips etc. complete in all respect as specified and as directed by Engr-in-Charge. complete all as specified and directed.
131S&F 4 to 5mm thick viterours china porcelain (vitrified tile) size and colour is directed by Eng-in-Ch/ GE set and jointed in readymade addesive over 10mm thick cement mortar 1:3 rendering coat incl joint filled by readymade joint filler to match with shade and colour of tile colour complete all as specified and directed.
132Dismentling of existing RCC louars/jali as in wall etc complete all as specified and directed
133Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as specified and directed.
134Fixing only in rep chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.
135Supply only chain link fencing, , any width and dia of wire not less than 3.00 mm complete all as specified and directed.Note - Weight of chain link fencing shall be acertian by BOO.
136M & L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for securing chain link fencing complete all as specified and directed.
137Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out on hard and dence soil complete all as specified and directed
138Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in loose/soft soil, complete all as specifies and directed.
139M&L for 75 mm cement concrete Type C2 1:3:6 (40 mm graded aggregate) in plinth protection and even and finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed.
140M&L for RCC M-20 design mix (using 20 mm graded stone aggregate.) in chajjas complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item.
141M&L for RCC M-25 design mix (using 20 mm graded stone aggregate.) in roof slabs supported on walls etc. complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item.
142Use and waste Formwork to chhajjas including edges flat fair finished surfaces of concrete complete all as specified and directed.
143M&L for Brickwork with fly ash bricks or brick tiles in brickon- edge walls (less than ½ brick thick),built in 1:6 cement mortar, complete all as specified and directed.
144M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of Cement plaster 1:6, rendering is to be finished even or smooth (without using extra lime or cement complete all as specified and directed.
145M&L for coat of wall care putty on wall, complete all as specified and directed.
146M&L for new surface of wall and applying two coat of internal oil emulsion over Priming plastered and other surfaces with alkali resistant priming paint, complete all as specified and directed.
147S & F Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including with screed bed or bedding layer of cement mortar (1:6) 15 mm thick for laying floor finishes, roofs complete all as specified and directed.
148S & F Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.8 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including with rendering of cement mortar (1:4) 10 mm thick for laying floor finishes, roofs complete all as specified and directed.
149S&F Factory made single/double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete all as specified and directed.
150S & F powder coated aluminium frame, shutter and grill for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
151S & F Sheet glass of thicknes 4mm, selected quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane etc complete all as specified and directed.
152S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, complete all as specified and directed.
153S & F for 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engg-in-Charge. complete all as specified and directed.
154S & F for 100 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
155S&F aluminium handles, cast type, anodised 100mm size, complete all as specified and directed.
156M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed of bedding layer of thickness 15 mm,complete all as specified and directed.
157M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over CM 1:4, 10mm thick on fair faces of brick work or concrete surfaces, complete all as specified and directed.
158S&F for vitreous casecade type single piece including dual flush type white PVC connection complete fixed and making good to floor, complete all as specified and directed.
159M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
160S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
161S & F Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges including taking down the existing towel rail. complete all as specified and directed.
162S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) fixed complete all as specified and directed..
163S&F Chromium plated toilet paper holder including fixing arrangement complete all as specified and directed .
164S&F 15 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors incl cutting chasing and making good complete all as specified and directed.
165S&F 20 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed.
166M&L for PVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .
167S&F 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
168S&F 15 mm bore angle/ stop cock, cast copper alloy fancy type chromium plated screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.
169M&L for Vitreous China bowl urinal flat back, white with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and directed.
170S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.
171S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius, complete all as specified and directed.
172S&F 110mm bore PVC (SWR) junction double, (double T) equal or unequal any radius, complete all as specified and directed.
173S&F 110mm bore PVC (SWR) cowl any radius, complete all as specified and directed.
174S & F 75 mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.
175S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.
176S&F Ball brass valves, high pressure, with polythene float and flynut complete, crewed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
177S&F liquid soap container of PTMT fixed with incl chromium plated brass screw and wooden /plastic cleat complete all as specified and directed.
178S&F for 5 mm thick mirror of selected quality glass, mounted on 5mm thick PVC frame and shutter, fixed to plugs with chromium plated brass screws and cup washers, complete all as specified and directed.
179Removing excavated material for soft / loose soil/ any type of soil exc. 250 m but n exc. 500 m and depositing where complete all as specified and directed.
180M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and incl frame plate, white modular cover plates suitable for mounting modular switches, sockets etc for light and fan points complete all as specified and directed.
181~ditto~all as per item No. 180 here in before but with one 3 pin, 5 amps, socket outlet on the same board. complete all as specified and directed.
182~ditto~all as per item No. 180 here in before but with one 3 pin, 5 amps socket outlet on independent board. complete all as specified and directed.
183~ditto~all as per item No. 180 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified and directed.
184Supply and fix modular switch type 230/ 250 volts, 6 amps, 1 module, single pole, one way, complete all as specified and directed.
185Supply and fix modular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps,2 module flush type, ISI marked complete all as specified and directed.
186Supply and fix switch modular 16 amps, flush type, ISI marked complete all as specified and directed.
187Supply and fix modular socket 2/3 pin combined, 6/16 amps 2 module, flush type, ISI marked complete all as specified & directed.
188Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed by Engineer-in-Charge.Make: Legrand cat no :5078 11 or eq in SEIMENS /GE complete all as specified and directed.
189Supply and fix ceiling rose surface bakelite, three terminal complete all as specified and directed.
190Supply and fix smart bright Batten Series, LED luminaire using LEDs 20 watt, natural white, 2200 Lumen, THD max 10 % ,CRI min 80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed.
191Supply and fix LED street light / security light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified & directed by Engineer-in-Charge.Make: Philips cat part no BRP331 LED36 CW R5N PC PSU S1 V1 or equivalent. complete all as specified and directed.
192Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
193Supply and fix modular stepped type electronic fan regulator flush type, two module on the existing phenolic laminated etc., as required, single pole, 240 volts, grade 120W watts, 2 Module heavy duty and ISI marked complete all as specified and directed.
194S&F sheet metal enclosure MCB DB double door, single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and directed.
195S&F MCB Single Pole and Neutral 240Volt, 40 Amps, 'C' series,10KA breaking capacity complete all as specified and directed.
196S&F MCB Single Pole 240Volt, upto 40Amps,10KA breaking capacity complete all as specified and directed.
197Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on completion complete all as specified and directed..Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. complete all as specified and directed.
198Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured 2 core X 10 SQMMwith multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed.
199M&L for dry river washed and screened dry sand for filling in trenches below and around the cable for cushioning including punning down as specified inrelevant clause of SSR Part I complete all as specified and directed. Note:- Punned thickness shall only be measured and paid. complete all as specified and directed.
200Supplying and laying unreinforced precast concrete cable cover, class LV Type 2 flat, size 300mm x 180mm x 40mm complete all as specified and directed.
201Supply and laying pipe galvanized, “Medium class”, including fittings all required fiiting arrangementlike tee, elbow socket union etc for of dia 20 mm and complete all as specified and directed.
202S&F gun metal gate valve of 20mm bore sizes screwed down high pressure with handle, Iron wheel (ISI marked) complete all as specified and directed.
203Schedule of credit of Amount Rs 32,235.00 to be deducted during AOC. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58251125
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 46.76 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair To Bldg No. 22 Fbd At Ridge Road, Provision Of Shed And Chain Link Fencing At Robert Barrack And Provn Of Guard Room Near Dsoi In The Aor Of Age B/R-1 Under Ge(P) No. 1 Jabalpur
Basic Detail
Tender No 8677/E8
Bidding Type Tender
Location
City Jabalpur
State Madhya Pradesh
Key Dates
Publish Date 18 Nov 2026
Submission Date 25 Nov 2026
Open Date 02 Dec 2026
Finance
Tender Value 46.76 Lakhs
Tender Fee 500
EMD 93600
Exemption Not Available
Document List
6b75d415-6146-421a-990e-7b8328862f53.html
8677TenderDocuments.pdf
BOQ_892986.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 3 days
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

6b75d415-6146-421a-990e-7b8328862f53.html

pdf

8677TenderDocuments.pdf

xls

BOQ_892986.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender