Tender For Provision Of Shed For Barrack Warden Furniture Near Guard Post Dit At Camero Complex, Provn Of Battery Stand Rack At Afcme At Camero Complex & Provision Of 3 Ton Tower Ac (Qty-02) At Server Room Edp Wing Afcao Room No 110
Tender Value
30.62 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
4 days left
EMD
61240
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Shed For Barrack Warden Furniture Near Guard Post Dit At Camero Complex, Provn Of Battery Stand Rack At Afcme At Camero Complex & Provision Of 3 Ton Tower Ac (Qty-02) At Server Room Edp Wing Afcao Room No 110
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n exe 15 cm deep in hard/dense soil complete all as specified an directed. |
| 2 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 depth for foundation etc or for shafts well cesspits manholes pier holed etc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard and dense soil complete all as specified and directed. |
| 3 | M&L PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in Foundations filling and mass concrete complete all as specified and directed. |
| 4 | M&L for RCC M-25 (design mix) ( using 20 mm graded stone aggregate ) as in foundation, including rafts, footing, foundation beams, plinth beams, bases for columns etc basement slabs complete all as specified and directed. |
| 5 | M&L for RCC M-25 Design Mix concrete (using 20mm graded stone aggregatet) as in columns, pillars, piers, post and struts. Complete all as specified and directed. |
| 6 | M&L for RCC M-25 Design Mix concrete (using 20mm graded stone aggregate) as in RCC bend, lintels over 1.5 span etc, complete all as specified and directed. |
| 7 | M&L for form work to sides of concrete foundations, footings, bases of columns, sides and soffits, plinth beams and similar work with rough finished , complete all as specified and directed. |
| 8 | M&L for form work to sides and soffits of floor or roof beams, bands, lintels cantilivers shelves etc with rough finished complete all as specified and directed. |
| 9 | M&Lfor brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed. |
| 10 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement, complete all as specified and directed. |
| 12 | S&F roof trusses (framed), trussed, purlins,crane gantries, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 13 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 and portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and directed. |
| 14 | S&F for mild steel TMT bars 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 15 | All as per item No 14 above but 5mm dia and over upto and including 10mm dia in stirupps, spacers and binders but in stirupps complete all as specified and directed. |
| 16 | S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet as in ridge , 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to gabble sides/wall, fixed with self tapping machine GI screws full threaded complete all as specified and directed. |
| 17 | S&F 2mm thick fiber glass translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall complete all as specified and directed |
| 18 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 19 | M & L for broken stone hard core of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 20 | M & L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base, floors and pavings etc. including using plate type electric vibrator complete all as specified and directed. |
| 21 | M&L for kota stone slab flooring 18-20 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match th shade of the slab including rubbing and polishing with and including 15mm thick screed bed in cm (1:6) complete all as specified and directed. |
| 22 | All as per item No 21 above but on vertical surfaces of walls /skirting/dado etc with and including 10mm thick cement plaster in 1:4 complete all as specified and directed. |
| 23 | M&L for 80 mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of any shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment complete all as specified and directed. |
| 24 | M&L for sand filling for sand cushioning for laying of interlocking paver blocks under floors/path including watering and consolidation as required complete all as specified and directed. |
| 25 | S&F Mild steel, plain, 1mm th black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 26 | M&L Anodised aluminium frame powder coating Minimum thickness 50 micron for doors windows,with one or more rebates including cleat for fixing etc complete all as specified and directed. |
| 27 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 28 | M&L 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes complete all as specified and directed. |
| 29 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and avrage width of aparture 1.18 mm complete all as specified and directed. |
| 30 | M&L for preparation of new steel surfaces of any description, not other wise described, over 10 cm width or girth and applying two coats synthetic enamel paint over a coats of red oxide primer complete all as specified and directed. |
| 31 | M & L for 50mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate ) as in plinth protection finished even and smooth without using extra cement including necessary form work complete all as specified and directed. |
| 32 | M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping,surface channels and drain bed plates including necessary formwork and weathering , slightly rounded or chamfered angles and throating complete all as specified and directed . |
| 33 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed. |
| 34 | Material labour for Providing precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) and setting in mortar 1:6 complete with joints to match complete all as specified and directed. |
| 35 | M&L for preparing new plastered surface of wall and applying three coats of white wash on wall etc complete all as specified and directed. |
| 36 | M&L for preparation on new or previously untreated wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over putty up to four storey height bldg complete all as specified and directed. |
| 37 | Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 38 | Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and directed. |
| 39 | M&L for Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and getting out hard/dense soil complete all as specified and directed. |
| 40 | M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in retaining walls any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed. |
| 41 | M&L for Brick work with subclass B old size bricks, staright or curved on plan exc 6.00 mtr mean redius, built in CM 1:4 complete all as specified and directed. |
| 42 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 43 | M &L for preparing of newly plaster surface of walls and applying two coats of Cement base paint on walls over a coat of alkali-resistant primer complete all as specified and directed. |
| 44 | Supply and fixed butt hinges 100 mm medium weight cold rolled mild steel complete all as specified and directed. |
| 45 | M&L in reapir for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed. |
| 46 | M&L for RCC (nominal mix) 1:2:4 type B1 (using 20 mm graded stone aggregate) as in RCC Slabs chajjaa complete all as specified and directed. |
| 47 | M&L for rough finished Formwork to flat chullah hoods, chajjas,troughs and similar items including edges complete all as specified and directed. Please Enable Macros to View BoQ information |
| 48 | M&L for rough finished Formwork to flat chullah hoods, chajjas,troughs and similar items including edges complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender