Tender For To Provide Thermal Insulation Works Pertaining To Boiler & Tg Area Of 250 Mw, Unit-7, Ptps, Panipat During Capital Overhauling
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Nov 2026
15 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panipat → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for To Provide Thermal Insulation Works Pertaining To Boiler & Tg Area Of 250 Mw, Unit-7, Ptps, Panipat During Capital Overhauling
BOQ
| Sl. No. | Item Description |
| 1 | Providing insulation work of boiler on Coal Feed Pipe, temp. upto 150 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 60mm. |
| 2 | Providing insulation work of boiler on PRDS drain line & tracing line, temp. upto 250 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 60mm. |
| 3 | Providing insulation work of boiler on PA/FD/ID Fan casings, temp. upto 75 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 60mm. |
| 4 | Providing insulation work of boiler onFlue Gas Duct, temp. upto 150 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 60mm. |
| 5 | Providing insulation work of boiler on Inlet & outlet of ESP, temp. upto 150 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 60mm. |
| 6 | Providing insulation work of boiler onMill Steam Inerting Line, temp. upto 250 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 60mm. |
| 7 | Providing insulation work of boiler on Boiler furnace, temp. upto 400 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 120mm. |
| 8 | Providing insulation work of boiler on Central section &opening of APH, temp. upto 350 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 120mm. |
| 9 | Providing insulation work of boiler on CRH line temp. upto 350 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 150mm. |
| 10 | Providing insulation work of boiler on Coal Mill Hot Air Box, temp. upto 250 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 150mm. |
| 11 | Providing insulation work of boiler on PRDS charging line from CRH line, temp. upto 350 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 150mm. |
| 12 | Providing insulation work of boiler on Re-heater, Platen SH, Final SH, Headers inside the pent house without cladding, temp. upto 540 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 150mm. |
| 13 | Providing insulation work of boiler on PRDS charging line from MS line, temp. upto 540 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 200mm. |
| 14 | Providing insulation work of boiler on HRH line, temp. upto 540 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 250mm. |
| 15 | Providing insulation work of boiler on Main steam line, temp. upto 540 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 250mm. |
| 16 | Providing insulation work of boiler on Ring Header & Z Panel, temp. upto 350 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 250mm. |
| 17 | Cladding Only (Pr.Part & ESP), temp. upto 400 degree celsius with G.I. wire netting and old cladding to be used, insulation thickness 120mm. |
| 18 | Providing Aluminium Silicate fibre block type insulation and plaster work of turbine on HP Control Valve cum stop valve, temp. upto 550 degree celsius with G.I. wire netting and insulation thickness 440mm. |
| 19 | Providing Aluminium Silicate fibre block type insulation and plaster work of turbine on IP Control valve cum stop valve, temp. upto 550 degree celsius with G.I. wire netting and insulation thickness 440mm. |
| 20 | Providing Aluminium Silicate fibre block type insulation and plaster work of turbine on LPBP stop valve cum control valve, temp. upto 550 degree celsius with G.I. wire netting and insulation thickness 440mm. |
| 21 | Providing Aluminium Silicate fibre block type insulation and plaster work of turbine onHP Turbine module including adjoining area (Including HP shaft sealing cover ,elow etc, temp. upto 550 degree celsius with G.I. wire netting and insulation thickness of max 440mm and as per actual in adjoining area.) |
| 22 | Providing Aluminium Silicate fibre block type insulation and plaster work of turbine on IP Turbibe module including adjoining area, temp. upto 550 degree celsius with G.I. wire netting and insulation thickness max 440mm and as per actual in adjoining area |
| 23 | Providing insulation work of turbine on MS and HRH Strainer & HP/IP pipe line etc, temp. upto 550 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 300mm. |
| 24 | Providing insulation work of turbine on Piping of IP control valve and Stop valve etc, temp. upto 550 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 250mm.. |
| 25 | Providing insulation work of turbine on EX 5 IP casing,IP,HP casing bottom & BPE 1 & 2 MS and CRH,HRH Drains etc., temp. upto 550 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 200mm. |
| 26 | Providing insulation work of turbine on MAW 10,MAW 55,MAW -15 & BP-3,4,6,8 and steam piping etc., temp. upto 350 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 100mm. |
| 27 | Providing insulation work of turbine on Valve and piping in TG Area of unit-7, temp. upto 250 degree celsius with G.I. wire netting and cladding of Al. sheet 0.56mm thickness, insulation thickness 60mm. |
| 28 | Only Cladding of Al. sheet 0.56mm thickness in T.G. Area unit 7 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender