Tender For Maintenance Of Various Sports Complexes/Golf Courses (A/R & maintenance of Of The Works At Siri Fort Sports Complex For The Year 2026-27).Sub Head : Fabrication , Installation & Commissioning Of A Complete Temporary Toilet Block , Security
Tender Value
25.89 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
4 days left
EMD
51783
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Various Sports Complexes/Golf Courses (A/R & maintenance of Of The Works At Siri Fort Sports Complex For The Year 2026-27).Sub Head : Fabrication , Installation & Commissioning Of A Complete Temporary Toilet Block , Security Blocks Nearby Swimming Pool Area & Golf Driving Range , Renovation Of Toilet Block At Terrace Area Of The Driving Range And Other Minor Repair Works At Siri Fort Sports Complex.Estimated Cost : Rs. 25,89,151/-
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.a. (1 cement : 5 coarse sand (zone-lll) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 2 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 3 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & anufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily Glazed Vitrified tiles Matt/Antiskid finish of sizea. Size of Tile 600 x 600 mm |
| 4 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.a. Size of Tile 600x600 mm |
| 5 | Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. |
| 6 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.a. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent |
| 7 | 12 mm cement plaster of mix :a. 1:4 (1 cement: 4 coarse sand) |
| 8 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :a. Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.A. For thickness of tiles 10 mm to 25 mm |
| 11 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 12 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 13 | Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 14 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead. |
| 15 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 16 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 1500x450 mm |
| 17 | Providing and fixing toilet paper holder : C.P. brass |
| 18 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 19 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 20 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.a 15 mm nominal dia Pipes . |
| 22 | Providing and fixing uplasticised PVC connection pipe with brass unions :30 cm length a. 15 mm nominal bore |
| 23 | Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600: Upto 10 mm depth and 10 mm width |
| 24 | Grading roof for water proofing treatment with Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 25 | Proiding and fixing tile insert shower drain size chanel of minimum size 100x100x32 mm and minimum weight 400 gm (+5%) built up with 1.2mm thick 304 Grade stainless steel , specially desinged for tiles up to 13 mm thickness, came with a drain frame/drain cover,tray/drain body , cockroach etc all complete as per direction of Engineer in charge |
| 26 | Providing and fixing table top wash basin of size 370x310x135 mm without pop waste of standard pattern, cutting and making good the walls and plateform wherever required, complete as per direction of Engineer-in charge. a. model no. 10105 of make Hindware or equivalent. |
| 27 | Providing and fixing Pillar cock tall of size 295 mm , cutting and making good the walls and plateform wherever required, complete as per direction of Engineer-in charge.a. model no.F280013CP of make Hindware or equivalent . |
| 28 | Providing and fixing C.P. brass Hand shower (Health Faucet) having flexible tube of required length and wall hook of approved make etc. model no.F160195CP of Hindware or equivalent, all complete as per direction of Engineer-in Charge. |
| 29 | Providing and fixing Pressmatic range Eon urinal flush valve round , cutting and making good the walls and plateform wherever required, complete as per direction of Engineer-in charge. a. model no F310016CP of make Hindware or equivalent. |
| 30 | Providing and fixing Studio Soap Dispenser Glass ( 56 mm dia and 154 mm height )With SS Holder , including fixing with PVC rawl plugs & screws etc. , all complete as per direction of Engineer-in Chargea. model no F102018CP of make Hindware or equivalent. |
| 31 | Providing and fixing 8 mm thick glass urinal partition of height 900 mm with help of stainless steel screws and mounting brackets into the wall, all complete as per manufacturer's specification and direction of Engineer-in-charge. |
| 32 | Fabrication, Installation & Commissioning of a complete Temporary Toilet Block covering a total proposed area of 29.20 sqm (approx.)/as per approved drawing area, as a single composite job, complete in all respects. The fabrication shall be executed as per the approved architectural plans, elevations, and directions of the Engineer-in-Charge, including all structural, plumbing, finishing, electrical and sanitary works.The unit of measurement for this item shall be Sqm and shall represent the plinth area• Specification Structure: MS Frame Structure for columns/beams (72mm x 72mm x 3mm) with foundation & pitched roofing (grid of 2ftx4ft of MS tubular pipe of 50mmX 50mm, thickness 3 mm) including all necessary welding, fittings and application of anti-corrosive primer and enamel paint. Make: TATA/ SAIL/RINL/JINDAL or equivalent to IS 808:1989.Roofing : Pitched roof of 50 mm thick corrugated PUF panel system using 02 Nos 0.5 mm and 0.35mm thick either side zinc coated PPGI pre-coated pre-colored sheets with 50 mm gap filled with polyurethane foam with extending with a suitable overhang as per the elevation, complete with all necessary fasteners, ridges, gutter and waterproofing measures.Walls: The wall shall be made in Aerocon panels of 50 mm thickness with outer cladding of 16 mm Puff panels. The PUF insulation material in the panels shall have fire retarding and self-extinguishing properties as per any international standard. B2 DIN 4102 .The PUF wall panel shall be of Make: LLYOD/JINDAL/ ACEPREFAB/AQUA/MODERN PREFAB/ACME/BNAL or equivalent. Also provision of ventilation/windows/Doors of specified dimensions at a sill height as per the requirements to also provided.Foundation Base & Flooring: to be paid extra as per site requirementExternal Finishing:16 mm puff material cladding . Internal Finishing: • Wall: Internal wall finishing with minimum 6 mm WPC wall panels. • False Ceiling: PVC Fluted panel ceiling with required framing and provision of light and ventilation/exhaust fan. • Doors: 12mm BWP grade pre-laminated board with SS frames & fittings. • Ventilations/ Windows: 5mm fix float glass on aluminium frame. • Cubical and Urinal partition: 05 nos of Toilet cubical and 01 nos janitor cubical of BWP grade pre-laminated cubical boards for internal partitions separating the WC and 03 nos urinal partitions. The work includes providing and fixing doors of required size with all necessary SS (Stainless Steel) hardware, hinges, latches, and framing .Sanitary Fitting: • EWC. 05 Nos. vitreous china single pieces with health faucet, angel valve etc. of approved shape, size and pattern. MAKE: CERA/ Hindware or equivalent. • Bib Tap.05 C.P brass Bib cock of CERA/ Hindware or equivalent. • Urinal. 03 nos Urinals with press matic flushing mechanisms and bottle trap MAKE: CERA/ Hindware or equivalent.• 06 nos wash basin counter top including all fittings, bottle trap , CP waste coupling along with CP brass Pillar tall cock, PVC connection 450 mm long and stop cock.Electrical Fitting: • Conceal wiring, Panel/COB LED lights as per Lumens requirement with Modular switches Make: HAVELS/CROMPTON/PHILIPHS/REXTON or equivalent.• Mechanical Ventilation: 5nos. Ceiling Exhaust fan. Make: HAVELS/CROMPTON/PHILIPHS/REXTON or equivalent• All fittings are Concealed& necessary provision of socket to be provided for equipmentAncillary Fittings: • 2 Nos Hand Dryer. • Looking mirror with HDHMR board (8 mm) backing matching basin counter length MAKE: ATUL/MODIGUARD/SAINT GOBAIN.• 4 Nos. Cloth hanger of chromium plated with four hooks.• 4 Nos. Soap Dispenser.• 6 Nos. toilet paper holder• 2 Nos. towel railPlumbing works: Necessary connections complete with all internal concealed water supply lines, waste/soil pipes, and connection to the nearby external drainage/water source. |
| 33 | Fabrication, Installation & Commissioning of a complete Temporary Security Block/Cabin/office space as per approved drawing area, as a single composite job, complete in all respects. The fabrication shall be executed as per the approved architectural plans, elevations, and directions of the Engineer-in-Charge, including all structural, finishing and electrical works.The unit of measurement for this item shall be Sqm and shall represent the plinth area• SpecificationStructure: -MS Frame Structure for columns/beams (72mm x 72mm x 3mm) with pitched roofing (grid of 2ftx4ft of MS tubular pipe of 50mmX 50mm, thickness 3 mm) including all necessary welding, fittings and application of anti-corrosive primer and enamel paint. Make: TATA/ SAIL/RINL/JINDAL or equivalent to IS 808:1989.Roofing: Pitched roof of 50 mm thick corrugated PUF panel system using 02 Nos 0.5 mm and 0.35mm thick either side zinc coated PPGI pre-coated pre-colored sheets with 50 mm gap filled with polyurethane foam with extending with a suitable overhang as per the elevation, complete with all necessary fasteners, ridges, gutter and waterproofing measures.Walls: The wall shall be made in Aerocon panels of 50 mm thickness with outer cladding of 16 mm Puff panels. The PUF insulation material in the panels shall have fire retarding and self-extinguishing properties as per any international standard. B2 DIN 4102 .The PUF wall panel shall be of Make: LLYOD/JINDAL/ ACEPREFAB/AQUA/MODERN PREFAB/ACME/BNAL or equivalent. Also provision of ventilation/windows/Doors of specified dimensions at a sill height as per the requirements to also provided.Foundation Base & Flooring: to be paid extra as per site requirement External Finishing: 16 mm puff material cladding . Internal Finishing: • Wall: Internal wall finishing with minimum 6 mm WPC wall panels. • False Ceiling: PVC Fluted panel ceiling with required framing and provision of light and ventilation/exhaust fan. • Doors: 12mm BWP grade pre-laminated board with SS frames & fittings. • Ventilations/ Windows: 5mm fix float glass on aluminum frame.Electrical Fitting: • Conceal wiring, Panel/COB LED lights as per Lumens requirement with Modular switches Make: HAVELS/CROMPTON/PHILIPHS/REXTON or equivalent• Mechanical Ventilation: 01 nos. Ceiling Exhaust fan. Make: HAVELS/CROMPTON/PHILIPHS/REXTON or equivalent. • All fittings are Concealed& necessary provision of socket to be provided for equipment |
| 34 | Less for GST correction factor on DSR Items from 1 to 24 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender