Tender For Restoration Of Rain Damages To Lwss Sundernagar Town In Tehsil Sundernagar Distt. Mandi (Hp)(Sh:- Construction of Roof Shed Over Storage Tank And providing and Fixing Of Pumping Machinery). (Under Ndf/2026/124)
Tender Value
1.98 Lakhs
Estimated cost
Bid Submission
07 Nov 2026
9 days left
EMD
4000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages To Lwss Sundernagar Town In Tehsil Sundernagar Distt. Mandi (Hp)(Sh:- Construction of Roof Shed Over Storage Tank And providing and Fixing Of Pumping Machinery). (Under Ndf/2026/124)
BOQ
| Sl. No. | Item Description |
| 1 | Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. In trusses and trussed purlins in buildings complete in all respects and as directed by the Engineer-in-Charge. |
| 2 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 3 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. |
| 4 | Providing and fixing cast Iron double flanged sluice valve as per IS:14846/2000 latest with upto date ammendments of Kartar make of following diameter, PN-1 including MS Flanges Table - 17, confirming to IS: 6392-1971 or latest with upto date ammendments including cutting of pipes wherever required, welding in three layers (leak proof) confirming to specifications as perescribed in relevant IS code i.e. IS: 816-1969 or latest as applicable with upto date ammendments with nuts, bolts, washers & specials etc. confirming to relevant IS code or latest with upto date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorrosive paints complete in all respect including all leads and lifts and as per entire satisfaction of the Engineer-in-charge. 150 mm dia |
| 5 | 125 mm dia |
| 6 | 100 mm dia |
| 7 | 80 mm dia |
| 8 | Providing and fixing Gun Metal Gate Valve (with hand wheel), Class-I, conforming to IS: 778-1984 (reaffirmed 2007) incorporating Amendments 1, 2 and 3, of the following diameter, including all leads and lifts, complete in all respects, as per the directions of the Engineer-in-Charge. 15 mm dia |
| 9 | 20 mm dia |
| 10 | 25 mm dia |
| 11 | 32 mm dia |
| 12 | 40 mm dia |
| 13 | 65 mm dia |
| 14 | Providing, supplying, installation, testing and commissioning of Mono Submersible Pump Set of Kirloskar/KSB/Sabar/BS or any other make approved by HP JSV, conforming to the latest relevant BIS specifications, suitable for pumping clear cold water and suitable for a total head of 10 metres and discharge of 12 LPS, complete with submersible squirrel-cage induction motor conforming to BIS: 9283-1979 with latest amendments, totally dust and water-proof for submersible duty and directly coupled to the pump. The pump shall be fitted with close impellers of bronze/suitable alloy conforming to BIS: 8034-1976 with latest amendments, complete with greased packed bearing and shaft with bound stator on motor side and shaft sleeve on pump side for protection of shaft. The pump and motor shall be isolated by intermediate casing and provided with double mechanical seal in oil chamber, grease-packed lubricated bearing and stainless-steel thrust bearing plate to withstand non-vertical loads with minimum wear and tear. The pump set shall also be provided with suitable device to take up expansion of water due to heating of motor. The pump set shall be complete with water-level guard, correction clamps, cable clips, depth gauge and all other necessary accessories required for satisfactory operation, complete in all respects, including all leads and lifts, to the entire satisfaction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender