Tender For Supply Installation Testing and Commissioning of Antique Electrical Poles On Footpath Of Pwd Roads Under Sadar Bazar Assembly Constituency (Ac-19) (Balance Work)
Tender Value
44.80 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
2 days left
EMD
89617
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of Antique Electrical Poles On Footpath Of Pwd Roads Under Sadar Bazar Assembly Constituency (Ac-19) (Balance Work)
BOQ
| Sl. No. | Item Description |
| 1 | Supply and erection of architectural column light pole made of mild steel with overall height of not less than 4 mtr. duly finished with four coats of protection coating viz etch primer, Epoxy primers, polyurethane and glass clear respective (each coating should not be having on an average thickness of 65 micron), Light column in square cross section 220 mm x 220 mm made of mild steel housing components in square cross section having minimum weight 120 kg. including a laser profile jali pattern(~1.5 m ht of MS laser cut sheet), gladded with opal acrylic diffuser not less than with 50Watt Tri color LED source and additional 4 nos. 9-12W LED each Post-top head , Black in Colour, coated for high corrosion resistance, silicone gasket, SS fasteners, foundation bolt of size 20 mm x 600 mm (N.S.) - 04 Nos. & foundation base plate of size (N.S.) 325 mm x 325 mm x 12 mm (L x W x H) - 01 No. and integral driver, IP65, IK>07 for the complete light fixture including non-metallic portion; and installation accessories. 360 deg light distribution in the column part provided and low glare indirect line of vision. Efficacy > 85%, THD<10%, PF>0.9, Surge protection> 4kV.CCT 3000K, CRI>70, SDCM<4 & IK>07; Life of LED – 50,000 burning hours, suitable size of service window having prewire earth connection, Integral Junction chamber for cable termination i/c providing and fixing 4 way 32 Amp heavy duty connector – 3 nos. and 1 no. 6 Amp SPMCB,10kA,“C”curve including making connections testing on load complete etc. as required. |
| 2 | Providing and laying in position 1:2:4 reinforced cement concrete foundation of size 400 mm.(L) X 400 mm. wide and 900 mm. deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement of cold twisted bars of 10 mm. dia 1200 mm long (approx)- 8 Nos. and reinforcement ring of cold twisted bar of 6 mm dia - 1800 mm (approx) - 6 nos. (with 150mm spacing) as required with positioning of foundation bolts and providing 63 mm. (O.D) DWC, HDPE Pipe for cable entry & exit as required. |
| 3 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in existing trench etc including form work etc as required i/c fixing of tile on foothpath which was removed during excavation of cable trench. |
| 4 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.a) 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 5 | Eraction of existing Fancy Pole with the help of suitable equipments and as decided by engineer-in-charge. Installed at various locations in Central Verge and footpath with using proper engineering & safety tools and with the help of Hydra and tower wagon & Heavy labour etc including transportation of pole from other site till further erection of pole of same site. including proper alignment of pole i/c connection of G.I earth wire with pole and termination of cable in pole window & installation of existing foundation etc as required complete at site. |
| 6 | Supplying and Laying of XLPE, Aluminum armored conductor cable in the existing pipe as reqd i/c termination of cable with suitable size thimble at both end etc as required complete at site.a) 4 X 16 sq.mm |
| 7 | Providing and fixing 6 SWG dia G.I wire on surface/in pipe / in trench for loop earthing along with the existing surface / recess conduit / submain wiring / cable as reqd. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender