Tender For 1) repair maintenance Various Electrical And Mechanical Services At Navkiran Home, Sector - 3, Rohini, Delhi. 2) annual repair maintenance Various Electrical & Mechanical Services At Home For Mentally Retarded, Asha Kiran Complex, Avantika
Tender Value
16.23 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
7 days left
EMD
32460
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 1) repair maintenance Various Electrical And Mechanical Services At Navkiran Home, Sector - 3, Rohini, Delhi. 2) annual repair maintenance Various Electrical & Mechanical Services At Home For Mentally Retarded, Asha Kiran Complex, Avantika, Sec.-01, Rohini (Sh: Repairing Of Water Heating/Room Heating System/Drinking Water Pump System/ electrical installation System)
BOQ
| Sl. No. | Item Description |
| 1 | Servicing & overhauling of 25/50 ltr. Geyser by opening of geyser & cleaning of element & rinsing of tank thoroughly with industrial descaling chemical, cleaning of body with detergent, taping of wires/joints tightening/ replacement of screws, bolts, providing of EPDM seal on joints, replacement of faulty indicators, checking for any leakage & electrical faults to ensure proper healthiness of geyser before installation etc. complete as instructed by engineer-in-charge. |
| 2 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25 Amp rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA complete with connections, testing and commissioning etc. as required. |
| 3 | Supplying and fixing four pole sheet steel enclosure on surface/recess along with 63 Amp. rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 4 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 5 | Providing Heating element / accessories for various types of geysers installed at site for improvement heating of efficiency etc as required.a) 2 KW heating element for geysers and replacement in existing geysers etc. as reqd. |
| 6 | b) 3 KW heating element for geysers and replacement in existing geysers etc. as reqd. |
| 7 | c) Geyser State/Thermo State for geysers and replacement in existing geysers etc. as reqd. |
| 8 | d) Supplying and fixing of 3 pin, 16 Amp, Plug top suitable for existing socket including connections etc. as reqd. |
| 9 | Supplying, installation, testing & commissioning of 50 Ltrs. Capacity storage vertical type gyser on the existing wall after dismantling of defective/ damage gyser with all associated materials including & flexible pipe connections and plug top etc as reqd at site. |
| 10 | Supplying, installation, testing & commissioning of 25 Ltrs. Capacity storage vertical type gyser on the existing wall with all associated materials including & flexible pipe connections etc as reqd at site. |
| 11 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.a) 25 mm |
| 12 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.a) 2 X 4sq.mm +1 X 4sq. mm earth wire |
| 13 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 in sq.mm FRLS PVC insulated copper conductor single core cable surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.a) Group C |
| 14 | Supplying, installation, testing & commissioning of 2KW capacity heat convector with 3 level heat control setting, power on LED indication, adjustable height stand, plastic cool touch handle with thermal cut out & overheat protection with 3 core insulated power cable & 16 amp plug top suitable for 240V/50 Hz single phase supply complete etc. as reqd. |
| 15 | Providing Heating element / accessories for 2 KW heat convectors installed at site for improvement heating of efficiency etc as required.a) Heating Element |
| 16 | b) Knob Thermostat |
| 17 | c) Motor Blowhot |
| 18 | d) Motor Fan |
| 19 | e) Neon Lamp |
| 20 | f) ON/OFF Switch |
| 21 | Supplying, laying & fixing of one number PVC insulated and XLPE Cu conductor power cable of 1.1 kV grade of following size on wall surface etc as required. (clamped with 1mm thick saddle) a) 4 x 25 sq. mm. |
| 22 | b) 3 x 10 sqmm |
| 23 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.a) 4 X 25 sq. mm (28mm) |
| 24 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 25 | Supplying and fixing following rating, three pole, 415 V, 10kA,\\"C\\" curve,miniature circuit breaker in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) 40 A |
| 26 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. a) 125 A, 16 KA, TPMCCB |
| 27 | Servicing and overhauling of following capacity submersible / monoblock/ openwell pumpset by replacement of mechanical seals, sleeve shaft, O ring, ball bearings, water proof cable joint, gaskets, lining seals, all lugs, minor wiring, nut bolt sets of pump and base mounting frame, applying one or more coats of red oxide primer & enamel paint all over base frame including oiling, greasing of all parts, dismantling & assembling of pump set along with to & fro cartage from site to workshop credit for dismantled materials etc. complete as required at site. (a) 5/7.5 HP |
| 28 | Rewinding of following size Submersible/Mono submersible/ monoblock pumpset with copper rewinding wire incl. dismantling of pumpset from site, cartage from site to work shop and return back to site, cutting the burnt winding wire (i/c credit for old winding wire) along with installation, testing & commissioning etc. as reqd. at site. a) 5/7.5 HP |
| 29 | SITC of 3-Phase DOL submersible starter in the existing panel/fixing on the wall surface suitable for upto 7.5 HP pump-set and suitable for item no. 1 i/c drilling holes, connections, testing complete etc. as reqd. |
| 30 | Supplying, Installation, testing and commissioning of 35W LED post top lantern made out of aluminium die cast cover body with anti corrosive stainless steel screw for cool day white light having minimum CCT 5700-6500 K, power factor not less than >0.90, CRI > 70% with IP 65 protection, (including dismantling the old fitting if any) complete with all accessories etc. including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 31 | Supplying, installation, testing & commissioning of Supply of Reverse Osmosis Purification System with capacity of 50 LPH for providing clean, safe & pure drinking water. Multi- Stage Purification Process Ensures every drop of water is pure and safe for consumption, Auto flushing of membranes ensures the water purifiers clean themselves from time to time, to maintain good hygiene. Makes water both chemically and micro- biologically potable by reducing hardness, TDS. Heavy metal contaminants and water –borne pathogenic microganisms. Dimensions )WxDxH)=530mm x 340 mm x 450mm, weight- 27 kgs approx., outer body CRCA Steel, Purified Water recovery 50%. The Company is having their NABL Accredited Lab Testing facilities in Delhi. Our Product Is ISO 9001 , Indian Medical Association Certified GC (Green Company) Mark BIS certificate,ISO 14001, ISO17025, ISO9001., with water inlet & outlet connections, suitable for operation on 230 V/50 Hz single phase AC supply complete as reqd. at site. |
| 32 | Supplying, testing & commissioning of IP23 rated 2.9 KW capacity PTC technology 15 fins oil filled radiator Heater with 3 level heat control setting, 400 watt PTC heating element with fan, powder coated fins, power on LED indication with thermal cut out & overheat protection with 3 core insulated power cable & 16 amp plug top suitable for use on 240V/50 Hz single phase supply complete etc. as reqd. |
| 33 | Supplying, installation, testing and commissioning of storage type electric water heater (Geyser) of 15 litre capacity, wall mounted, fancy type, suitable for 230V single phase AC supply, complete with corrosion resistant inner tank, glass lined/heavy duty heating element, thermostat, thermal cut-out, safety valve, inlet and outlet connections, including necessary fixing arrangement, 15 mm CPVC/ GI connection up to 1.0 metre, electrical connection with 3 core copper flexible wire, modular switch, socket, ceiling rose/connector, earthing, making good the damages and testing & commissioning complete as required at site. |
| 34 | Buy Back of Dismantled materials :-a) Geyser/ Convector heating element |
| 35 | b) Thermostat/Thermostat Knob |
| 36 | c) 15A Plug Top/ AC Plugtop |
| 37 | d) 50 Ltrs. Geysers |
| 38 | e) Heat Convector |
| 39 | f) Motor Blowhot |
| 40 | g) Motor Fan |
| 41 | h) Neon Lamp |
| 42 | i) ON/OFF Switch |
| 43 | j) Burnt out Al cable |
| 44 | k) 40 A TPMCCB |
| 45 | l) Post Top fittings Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender