Tender For repair maintenance Specialized Electrical & Mechanical Services At Tis Hazari Court Complex, Delhi. (Sh:- Repair / Replacement Of Fire Fighting Components And Servicing & Overhauling Of Pumps Installed At Extension Block, Tis Hazari Court.
Tender Value
5.53 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
2 days left
EMD
11061
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair maintenance Specialized Electrical & Mechanical Services At Tis Hazari Court Complex, Delhi. (Sh:- Repair / Replacement Of Fire Fighting Components And Servicing & Overhauling Of Pumps Installed At Extension Block, Tis Hazari Court.)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, servicing and overhauling of 60 HP Capacity Split casing type water supply pump set including replacement of old sleev, packing, gland plat, oil seal, 1-T cooling pipe, gasket, rusted studs, cleaning of impeller with suitable chemical, replacement of gland dori and reinstallation the same, testing and commissioning complete etc as required. (Credits for dismantled material under buy back.) |
| 2 | Dismantling, servicing and overhauling of 10 HP Capacity Split casing type fire fighting Jockey pump set including replacement of old sleev, packing, gland plat, oil seal, 1-T cooling pipe, gasket, rusted studs, cleaning of impeller with suitable chemical, replacement of gland dori and reinstallation the same, testing and commissioning complete etc as required. (Credits for dismantled material under buy back.) |
| 3 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 4 | a) Single headed Stainless steel |
| 5 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : |
| 6 | a) Single headed Stainless steel |
| 7 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 8 | a) 40 mm dia |
| 9 | c) 80 mm dia |
| 10 | e) 150 mm dia |
| 11 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 12 | a) 80mm dia |
| 13 | b) 100 mm dia |
| 14 | c) 150 mm dia |
| 15 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : |
| 16 | a) Stainless Steel (Grade 304) |
| 17 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
| 18 | a) 30 m |
| 19 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : |
| 20 | a) Stainless Steel (Grade 304) |
| 21 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. |
| 22 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 23 | Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 25 | Supply and Fixing of 4 x 16 sq. mm Copper Conductor XLPE insulated PVC sheathed armoured Cable as per IS7098 (Part-I) 1988 on Surface complete as required. |
| 26 | Credit for following dismantling material under buy back |
| 27 | b) Old/Assorted Hydrant valve |
| 28 | c) Old/Assorted Butterfly/sluice valve |
| 29 | d) Old/Assorted Non-return valve |
| 30 | e) Old /Assorted RRL Hose pipe |
| 31 | f) Old /Assorted First-aid Hose Reel |
| 32 | h) Old / rusted air vessel |
| 33 | j) Old / Assorted Pressure guage / pressure switch |
| 34 | k) Old / rusted cable Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender