Tender For Rectification Works Of 1 No Small Water Supply Schemes Under Package-9 To Parathode Grama Panchayath In Kottayam District
Tender Value
16.94 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
24 days left
EMD
50000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kottayam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rectification Works Of 1 No Small Water Supply Schemes Under Package-9 To Parathode Grama Panchayath In Kottayam District
BOQ
| Sl. No. | Item Description |
| 1 | APPENDIX -1 KADALIKKADU |
| 2 | Supplying and installing OPENwell pumpset with ISI mark and specifications with all accessories as per the duty condition confirming to relovent ISI specificaton and mark -Head 100m & discharge 10000 LPH including Oil immersed Star Delta starter 7.5HP, /4KVAR Power capacitor, Single phase preventor Cable 4 sqm, Earthing material, Pressure Guage with siphon and/ Valve, NR Valve , Sluice Valve, Panel board of size 2.5 x 2 feet including volt meter, ammeter, selector switch, 100A MCCB, 300MA ELCB, 63 A Fuse unit 3nos and panel board wiring with cables, Supply & Fixing MS supporting clamps. with Pump set erection charges including welding the column pipes with flanges, bend and fitting valves including the cost of rubber mat, nuts, bolts, labour charge,conveyance charge etc Supply and fixing 80 mm GI pipe with all fittings |
| 3 | Desilting open wells of dia above 3.5m and up to 6.0m and depth up to 9.0m by earth work excavation in or under water, after closing the inlet valves and plugging any holes in the steining by engaging divers with breathing accessories, bailing out water using pump set of suitable capacity, lifting the excavated silt/mud/clay using ropes, pulleys and buckets and disposing the same within minimum lead of 50 m from the periphery of the well, including engaging coolies for scrapping the inner side of the well, without causing any damages to the existing structures and installations, including hire and conveyance of tools and plant and as per the directions of the department officers etc. complete. |
| 4 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 75 mm dia 10 kg |
| 5 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 63 mm dia 10 kg |
| 6 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 50 mm dia 10 kg |
| 7 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 40 mm dia 10 kg |
| 8 | Supply of PE Pipe, PE100, PN10, conforming to IS 4984/2016. 32 mm dia 10 kg |
| 9 | Supply of PVC Pipe, 10kg/cm2, 25mm Dia. |
| 10 | Supply of PVC Pipe, 10kg/cm2, 20mm Dia. |
| 11 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil |
| 12 | \\"Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and including cost of fittings. 75 mm dia |
| 13 | \\"Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and including cost of fittings. 63 mm dia |
| 14 | \\"Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and including cost of fittings. 50 mm dia |
| 15 | \\"Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and including cost of fittings. 40 mm dia |
| 16 | \\"Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and including cost of fittings. 32 mm dia |
| 17 | Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 25 mm nominal outside diameter pipes. |
| 18 | Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 20 mm nominal outside diameter pipes. |
| 19 | Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 200mm along the sides of proposed alignment of the pipe to be laid without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffice diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means and carrying out the excavation. |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - 1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) for road concreting |
| 21 | Providing water metre, with u-trap, fitting air valve, supply and fixing suitable ferrocement/synthetic fibre made water metre protection box, water metre valve, saddle piece etc complete as per the approved drawing including cost and conveyence of all materials |
| 22 | Providing and fixing Multijet water meter including cost and conveyence of all materials |
| 23 | Providing and fixing gun metal gate valve of approved quality, including cost and conveyence of all materials 32 mm nominal bore |
| 24 | Providing and fixing gun metal gate valve of approved quality, including cost and conveyence of all materials 50 mm nominal bore |
| 25 | Providing and fixing gun metal gate valve of approved quality, including cost and conveyence of all materials 63 mm nominal bore |
| 26 | Providing and fixing gun metal gate valve of approved quality, including cost and conveyence of all materials 75 mm nominal bore |
| 27 | 12 mm cement plaster finished with a floating coat of neat cement of mix: 1:3 ( 1 cement : 3 fine sand) - inside tank |
| 28 | White washing with lime to give an even shade: (three or more coats) |
| 29 | Finishing walls with water proofing cement paint of required shade:New work (Two or more coats) |
| 30 | Lettering with black Japan pint of approved brand and manufacture |
| 31 | Water quality test Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender