Tender For Construction Of Kayikabhavan, Thiruvananthapuram - Phase I - Balance Civil Works - Interior Works
Tender Value
79.56 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
7 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Kayikabhavan, Thiruvananthapuram - Phase I - Balance Civil Works - Interior Works
BOQ
| Sl. No. | Item Description |
| 1 | INTERIOR PARTITIONS & GLASS DOORS FOR FIRST AND SECOND FLOOR |
| 2 | OD178903/2026-2027 Supply and installation of a single-glazed partition system, 2400 mm in height, comprising 10 mm thick toughened glass with a certified Sound Transmission Class (STC) rating of 34, supported by a valid test certificate from DEKO, Saint-Gobain or an approved equivalent manufacturer. The system shall include 24 × 30 mm horizontal and vertical aluminium profiles with black anodized finish and glass-to- glass joints sealed using 1 × 7 mm silicone tape . The cost of the aluminium box shall be excluded from this item. Overpanels above doors shall be included in the partition quantity measured under this item. The work shall include all necessary accessories, fittings, sealants, supports, fixing materials and installation works required for a complete installation, properly aligned, levelled, plumb and securely fixed, in accordance with the approved drawings and specifications and as per the direction of Engineer-in-Charge. |
| 3 | OD179387/2026-2027 Supply and installation of a 2400 mm high single-glazed freestanding partition system with one side support of FG80-32x80mm vertical end profile comprising 10mm thick toughened glass with a Sound Transmission Class (STC) rating of 34 dB supported by a valid test certificate from DEKO, Saint-Gobain or n approved equivalent manufacturer. The system shall include 24 × 30 mm horizontal and vertical aluminium profiles with black anodized finish and glass to glass jointssealed using 1 × 7 mm silicone tape. The cost include all necessary accessories, fittings, sealants, supports, fixing materials and installation works required for a complete installation, properly aligned, levelled, plumb and securely fixed, in accordance with the approved drawings and specifications and as per the direction of Engineer-in-Charge. |
| 4 | OD94659/2026-2027 Supply and installation of a single-leaf, frameless, non-stile glass door of size 900 × 2100 mm, comprising 10 mm thick toughened glass with a specified Sound Transmission Class (STC) of 31 dB, fitted with an FG26 modular door frame of 44 × 80 mm profile, finished in black-anodised aluminium, of DEKO, Saint-Gobain or an approved equivalent make. The door shall be provided with stainless-steel-finish hardware of GEZE or an equivalent approved make, including a Glaskar mortice lock with lever handle, TS 3000 V slide-arm door closer with hold-open function, clamping plate, spacer, glass door hinges and door stopper. The rate shall include all materials, fabrication, installation, fixing, alignment, adjustment, testing and commissioning, complete as per the the directions of the Engineer-in-Charge. |
| 5 | OD179061/2026-2027 Supply and installation of frameless, non-stile, single-leaf glass doors of size 855 × 2100 mm, comprising 10 mm thick toughened glass with a specified Sound Transmission Class (STC) rating of 31 dB, fitted with FG26 modular door frame of 44 × 80 mm profile, finished in black-anodised aluminium of DEKO, Saint- Gobain or an approved equivalent make. The door shall be provided with stainless-steel- finish hardware of GEZE or an approved equivalent make, including a Glaskar mortice lock with lever handle, TS 3000 V slide-arm door closer with hold-open function, clamping plate, spacer, four Glaskar glass door hinges and a door stopper. The rate shall include all materials, fabrication, installation, fixing, alignment, adjustment and testing, complete as per the directions of the Engineer-in-Charge. |
| 6 | OD94658/2026-2027 Supply and installation of frameless, non-stile, single-leaf glass doors of size 1005 × 2100 mm, comprising 10 mm thick toughened glass with a specified Sound Transmission Class (STC) rating of 31 dB, fitted with FG26 modular door frame of 44 × 80 mm profile, finished in black-anodised aluminium of DEKO, Saint-Gobain or an approved equivalent make. The door shall be provided with stainless-steel-finish hardware of GEZE or an approved equivalent make, including a Glaskar mortice lock with lever handle, TS 3000 V slide-arm door closer with hold-open function, clamping plate, spacer, four Glaskar glass door hinges and a door stopper. The rate shall include all materials, fabrication, installation, fixing, alignment, adjustment and testing, complete as per the directions of the Engineer-in-Charge. |
| 7 | OD175897/2026-2027 Supply and installation of frameless, non-stile, double-leaf glass shutter door of size 1800 × 2100 mm comprising 10 mm thick toughened glass with a specified Sound Transmission Class (STC) rating of 31 dB fitted with FG26 modular door frame of 44 × 80 mm profile, finished with black-anodised aluminium of DEKO, Saint- Gobain or an approved equivalent make. The door shall be provided stainless-steel-finish hardware of GEZE or similar equivalent make including PL 50 bottom lock with 300 mm D-type pull handle, TS 3000 V slide-arm door closer with hold-open function, clamping plate and spacer, glass door hinges and door stopper. The rate shall include the supply of all materials, fabrication, installation, fixing, alignment, adjustment and testing, complete as per the Direction of Engineer in charge. |
| 8 | OD175904/2026-2027 Supply and installation of Deko or similar equivalent make fixed-type aluminium box section of size 100 × 100 mm and height up to 2400 mm, with black-anodised aluminium profile finish, including all necessary brackets, connectors, anchor fasteners, fixing accessories and supports required for proper installation and alignment. The rate shall include the supply of all materials, cutting, fabrication ,fixing, installation and finishing, complete as per the Direction of Engineer in charge. |
| 9 | OD173730/2026-2027 Providing and fixing 75 mm thick gypsum board partition using Knauf ST-50 or Saint-Gobain Gyproc Gypsteel ULTRA or an approved equivalent make GI steel framing system covered with Sheetrock gypsum boards fixed on both sides, comprising 48 mm C-studs (0.5 mm thick) spaced at 610 mm centres and 50 mm floor and ceiling channels (0.5 mm thick), fixed with suitable anchor fasteners at 600 mm centres. The framework shall include GI noggin channels at horizontal board joints. Sheetrock gypsum boards shall be fixed vertically to the framework using suitable screws, with staggered joints. All joints, masonry junctions and service penetrations shall be properly treated with suitable jointing compound and fire- and acoustic-rated sealant, as applicable. Provision for electrical and networking boxes shall be made using 25 × 25 × 1.2 mm thick aluminium L-angles fixed to the framework at the required locations. The rate shall include all materials, framework, boards, screws, fasteners, joint treatment, sealant, installation and finishing, complete as per the direction of Engineer-in-charge. |
| 10 | OD177083/2026-2027 Providing and fixing 50 mm thick glass wool insulation of 48 kg/m³ density within opaque dry wall partitions, using Knauf EARTHWOOL or similar approved equivalent make. The insulation shall be cut to the required sizes and fitted tightly between the GI steel framework members without gaps or compression. The insulation shall be provided with RP tissue wrapping as specified in the approved drawings and manufacturer's recommendations. The rate shall include supply of insulation material, RP tissue, cutting, fitting, fixing, necessary fasteners and accessories, wastage and all incidental works, complete as per the direction of Engineer-in-Charge. |
| 11 | FALSE CEILING FOR FIRST AND SECOND FLOOR |
| 12 | OD172612/2026-2027 Providing and fixing 12.5 mm thick moisture-resistant gypsum board false ceiling using Knauf, Saint-Gobain Gyproc, or equivalent approved brands, with suspended GI framework comprising perimeter channels, intermediate channels, ceiling sections, ceiling angles, soffit cleats and connecting clips of Thundersteel, Gypserra, or equivalent approved brands, including necessary fasteners and anchors. Framework shall be installed at the specified spacing, with ceiling sections at 457 mm c/c and suspension grid at 1220 × 1220 mm. Boards shall be fixed with 25 mm drywall screws at 230 mm c/c and 150 mm along the perimeter. Joints shall be finished flush using approved jointing compound and paper tape, complete as per manufacturer's specifications.The rate shall be inclusive of the cost of GI framework, suspension system, all necessary fittings, fasteners, accessories, labour and materials required for the complete execution of the work in accordance with the approved drawings and specifications and as per the direction of Engineer-in-Charge. |
| 13 | OD178811/2026-2027 Providing and fixing 600 x 600 x 15 mm white acoustic ceiling tiles of Knauf Echotone / Ecophon Advantage E or equivalent approved make, having NRC 0.90, CAC 35 and light reflectance (LR) 0.83, suitable for 95% relative humidity and 40°C, on an exposed 15 mm wide T15 suspended GI grid system. The grid shall comprise main runners, 1200 mm cross tees and 600 mm secondary cross tees, with pre-painted galvanised iron (PPGI) capping, wall angles and GI soffit cleats, conforming to relevant IS standards. The ceiling shall be suspended using suitable galvanised hangers, butterfly level clips, fasteners and accessories, fixed at the required spacing as per the manufacturer's recommendations. The tiles shall be neatly laid with uniform joints, proper alignment and a true horizontal finish. The rate shall include all materials, labour, suspension system, hangers, fasteners, cutting, levelling, perimeter finishing, wastage and incidental works, in accordance with the approved drawings and specifications and as per the direction of Engineer-in-Charge. |
| 14 | 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 15 | 13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 16 | 13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats |
| 17 | PANELLING WORKS |
| 18 | OD180312/2026-2027 Providing and fixing charcoal-finish fluted wall panelling using Merino, Greenlam, Century or an approved equivalent make, including the necessary supporting framework, fixing accessories, screws, adhesives, cutting, fitting, edge finishing, labour, wastage and all incidental works required for proper installation. The rate shall include the cost of all materials, transportation, fabrication, installation and finishing, complete as per the directions of the Engineer-in-Charge. The final quantity and cost shall be determined based on actual site measurements. |
| 19 | OD180314/2026-2027 Providing and fixing decorative wall panelling in the lobby using 303-grade BWR plywood conforming to IS 303 of WIGWAM, CenturyPly, Greenply or an approved equivalent make, finished with decorative laminate of Merino, Greenlam, Royale Touche or an approved equivalent make, including approved graphic design and sticker work. The work shall include the necessary supporting framework, screws, adhesives, fittings, cutting, fixing, edge finishing, labour, wastage and all incidental works. The rate shall include the cost of all materials, transportation, fabrication, installation and finishing, complete as per the approved design and the directions of the Engineer-in-Charge. The final quantity and cost shall be determined based on actual site measurements. |
| 20 | MODULAR FURNITURE |
| 21 | OD177017/2026-2027 Supply of an office table of size 1500 mm × 600 mm × 750 mm and 1650 mm × 400 mm × 650 mm using approved makes such as Spacewood, Godrej Interio, Durian, Featherlite, or equivalent make.The tabletop shall be made of 25 mm thick plywood with 2 mm thick PVC edge banding. An aluminium powder-coated flip-open unit with a soft-closing mechanism and a termination box below the tabletop shall be provided to accommodate electrical and data sockets. A vertebra cable management system shall be provided below the tabletop for routing cables from the floor. The tabletop shall be supported by a powder-coated MS square straight-leg understructure of size 50 mm × 50 mm, complete with supporting beams. An MS powder-coated perforated modesty panel shall be provided below the tabletop. The side storage unit shall be made of 18 mm thick plywood particle boards, with adjustable shelves made of 18 mm thick plywood. The shutters shall be made of 18 mm thick plywood and fitted with hinges, reverse waterfall handles, and a standard locking unit. A pedestal shall also be provided, constructed of plywood particle boards and comprising two drawers and one filing unit, complete with a cam lock and reverse waterfall handles.The rate shall include all materials, hardware, fittings, supports, cable management provisions, fabrication, powder coating,loading,unloading, transportation, assembly, installation and finishing, complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 22 | OD177154/2026-2027 Supply of an office table with side storage, having a main table (MT) size of 2000 mm X 750 mm X750 mm and side storage (SS)size of 1650 mm x400 mmx 650 mm using approved makes such as Spacewood, Godrej Interio, Durian, Featherlite, or equivalent make. The tabletop shall be made of 25mm thick plywood with 2 mm thick PVC edge banding. An aluminium powder-coated flip-open unit with a soft- closing mechanism and a termination box below the tabletop shall be provided to accommodate electrical and data sockets. A vertebrae cable management system shall be provided below the tabletop for routing cables from the floor. The tabletop shall be supported by a powder-coated MS square straight-leg understructure of size 50 mm x 50 mm, complete with supporting beams. An MS powder-coated perforated modesty panel shall be provided below the tabletop.The side storage unit shall be constructed using 18 mm thick plywood particle boards, with adjustable shelves made of 18 mm thick plywood. The shutters shall be made of 18 mm thick plywood and fitted with hinges, reverse waterfall handles, and a standard locking unit. A pedestal shall also be provided, constructed of plywood particle boards and comprising two drawers and one filing unit, complete with a cam lock and reverse waterfall handles.The rate shall include all materials, hardware, fittings, supports,cable management provisions, fabrication, powder coating,loading, unloading, transportation, assembly,installation and finishing, complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 23 | OD177289/2026-2027 Supply and installation of workstation of size 1200 mm × 600 mm × 750 mm using approved makes such as Spacewood, Godrej Interio, Durian, Featherlite, or equivalent make, comprising a 25 mm thick plywood tabletop finished with 2 mm thick PVC edge banding on all exposed edges. An aluminium powder-coated flip- open cable access unit with soft-close mechanism shall be provided, complete with a termination box below the tabletop to accommodate electrical and data sockets. An 8 mm thick laminated glass main screen shall be provided above the tabletop, fixed securely using suitable holders to a height of 350 mm above the tabletop. A mild steel (MS) powder-coated vertical cable raceway shall be provided below the tabletop, with intermediate legs/supports as required for routing LAN and electrical cables. The tabletop shall be supported on a powder-coated MS understructure comprising 50 mm× 50 mm square straight legs and suitable supporting beams for adequate strength and stability. An MS powder-coated modesty panel of 475 mm height shall be provided on the aisle side only. The rate shall include all materials, hardware, fittings, supports, cable management provisions, fabrication, powder coating,loading,unloading, transportation, assembly, installation and finishing, complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 24 | OD177165/2026-2027 Supply and installation of reception table of size 3100 mm × 700 mm ×750 mm and 2400 mm × 700mm × 750mm using approved makes such as Spacewood, Godrej Interio, Durian, Featherlite, or equivalent make with laminate finish with pedestal made of 17 mm thick Fabwood exterior-grade pre-laminated particle board with 2 mm thick PVC edge banding matching the laminate finish, including fluted panelling on the side surfaces with matching finish, complete as per the approved design and specifications..The rate shall include all materials, hardware, fittings, supports, cable management provisions, fabrication, powder coating,loading, unloading, transportation, assembly, installation and finishing, complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 25 | OD177185/2026-2027 Supply and installation of a conference table of size 4800 mm × 2300 mm × 750 mm using approved makes such as Spacewood, Godrej Interio, Durian, Featherlite, or equivalent make with a tabletop made of 25 mm thick plywood and finished with 2 mm thick PVC edge banding. An aluminium powder-coated flip-open unit with a soft-closing mechanism and a termination box below the tabletop shall be provided to accommodate electrical and data sockets. An MS powder-coated horizontal raceway shall be provided below the tabletop, with intermediate legs to facilitate the routing of LAN and electrical cables. The tabletop shall be supported by a powder-coated MS square straight-leg understructure of size 50 mm × 50 mm, complete with supporting beams, as per the approved design and specifications. The rate shall include all materials, hardware, fittings, supports, cable management provisions, fabrication, powder coating,loading, unloading, transportation, assembly, installation and finishing, complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 26 | OD177192/2026-2027 Supply and installation of a table of size 2400 mm × 1000 mm × 750 mm using approved makes such as Spacewood, Godrej Interio, Durian, Featherlite, or equivalent make with a 25 mm thick plywood tabletop finished with 2 mm thick PVC edge banding, an aluminium powder-coated flip-open unit with a soft-closing mechanism and a termination box below the tabletop to accommodate electrical and data sockets, an 8 mm thick laminated glass screen fixed above the tabletop using suitable holders to a height of 350 mm, an MS powder-coated vertical raceway below the tabletop with intermediate legs to facilitate the routing of LAN and electrical cables, a supporting understructure comprising 50 mm × 50 mm powder-coated MS square straight legs with supporting beams, and an MS powder-coated modesty panel of 475 mm height provided on the aisle side only, complete as per the approved design and specifications.The rate shall include all materials, hardware, fittings, supports, cable management provisions, fabrication, powder coating,loading, unloading, transportation, assembly, installation and finishing, complete in accordance with the approved drawings, specifications and directions of the Engineer- in-Charge. |
| 27 | EXECUTIVE CHAIRS |
| 28 | OD94693/2026-2027 Supply of Executive Chair with high-back nylon frame and imported striped nylon mesh backrest, adjustable lumbar support (height and depth) of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent make, Height-adjustable armrests with PP pads, seat made of 12 mm thick plywood with 45 density PU foam and upholstered with imported fabric, synchronized single-lock reclining mechanism, TÜV-certified Class 4 gas lift with 120 mm stroke, heavy-duty 330 mm nylon five- star base, and 50 mm PU castors for smooth movement. The rate shall include all fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 29 | OD94719/2026-2027 Supply of Executive Chair with individual non-adjustable headrest of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent make made of PP frame with cushioned foam and mesh, backrest made of PP with fibre outer shell and square mesh design, fixed PP and fibre armrests, fabric upholstered seat, centre-tilt single- lock mechanism, TÜV-certified Class 4 gas lift with 120 mm stroke, heavy-duty 330 mm nylon five-star base, and 50 mm PU casters for smooth movement. The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer- in-Charge. |
| 30 | OD94720/2026-2027 Supply of Executive Chair with seat, backrest and armrests headrest of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent make made of imported plywood upholstered with high-quality imported rexine, knee-tilt mechanism with four locking positions, TÜV-certified Class 4 electroplated gas lift with 100 mm stroke, and heavy-duty aluminium base with sleek design. The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 31 | OD94723/2026-2027 Supply of Executive Chair with adjustable headrest upholstered with nylon mesh, high-back nylon outer frame with imported striped nylon mesh of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent make. Depth and height adjustable lumbar support, 4D adjustable ergonomic armrests, seat made of 12 mm thick plywood with 45 density PU moulded foam protected by a stylish seat cover and upholstered with imported fabric, auto-tension multi-lock reclining mechanism, TÜV- certified Class 4 gas lift with 120 mm stroke, heavy-duty 330 mm nylon five-star base, and 50 mm PU casters for smooth movement. The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 32 | OD94726/2026-2027 Supply of Executive Chair with fixed headrest of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent make made of nylon frame and imported striped nylon mesh, high-back nylon outer frame with imported striped nylon mesh, fixed nylon lumbar support, fixed T-type PP and fibre armrests, seat upholstered with imported fabric, synchronized single-lock reclining mechanism, powder-coated TÜV-certified Class 4 gas lift with 120 mm stroke and BOSQ logo engraved, heavy-duty 330 mm nylon five-star base with PU casters, tested as per BIFMA X5.1 standards.The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer- in-Charge. |
| 33 | OD94698/2026-2027 Supply of Performance/Work Chair with backrest of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent make made of PP with fibre outer shell and square mesh design, fixed PP and fibre armrests, fabric upholstered seat, centre-tilt single-lock mechanism, TÜV-certified Class 4 gas lift with 120 mm stroke, heavy- duty 330 mm nylon five-star base, and 50 mm PU casters for smooth movement. The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 34 | OD94725/2026-2027 Supply of Performance/Work Chair with high-back nylon outer frame and imported striped nylon mesh backrest of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent make.Depth and height adjustable lumbar support, height-adjustable armrests with PP pads, seat made of 12 mm thick plywood with 45 density PU foam upholstered with imported fabric, synchronized single-lock reclining mechanism, TÜV-certified Class 4 gas lift with 120 mm stroke, heavy-duty 330 mm nylon five- star base, and 50 mm PU casters for smooth movement. The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 35 | OD94727/2026-2027 Supply of Performance/Work Chair with backrest of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent make made of PP with fibre outer shell and square mesh design, fixed PP and fibre armrests, fabric upholstered seat, centre-tilt single-lock reclining mechanism, TÜV-certified Class 4 powder-coated gas lift with 120 mm stroke, heavy-duty 330 mm nylon five-star base, and 50 mm PU casters for smooth movement. The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 36 | OD94694/2026-2027 Supply of Guest/Multi-Use Chair with PP and fibre backrest having a square mesh design of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent make, fixed PP and fibre armrests, fabric upholstered seat, and a 2.1 mm thick round tubular mild steel cantilever base with powder-coated or chrome-plated finish. The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer- in-Charge. |
| 37 | OD94696/2026-2027 Supply of Guest/Multi-Use Chair with backrest of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent makemade of powder-coated mild steel frame upholstered with nylon mesh, fabric upholstered seat with imported fabric, 2.1 mm thick round tubular mild steel four-leg base with powder-coated or electroplated chrome finish, tested as per BIFMA X5.1 standards. The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 38 | OD94721/2026-2027 Supply of Guest/Multi-Use Chair with seat, backrest and armrests of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent make made of imported plywood upholstered with high-quality imported rexine, supported on 1.25-inch electroplated metal legs. The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 39 | OD94722/2026-2027 Supply of Guest/Multi-Use Chair of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent makewith fixed PP and fibre armrests upholstered with cushioned leatherette, seat and backrest upholstered with high-quality leatherette, supported on a 2.1 mm thick round tubular mild steel cantilever base with powder- coated or electroplated chrome finish, tested as per BIFMA X5.1 standards. The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer-in-Charge. |
| 40 | OD94724/2026-2027 Supply of Guest/Multi-Use Chair with backrest of Featherlite, Godrej Interio, BOSQ, Wipro, or approved equivalent makemade of nylon outer frame and imported striped nylon mesh, ergonomic 4D adjustable armrests, seat made of 12 mm thick plywood with 45 density PU moulded foam upholstered with fabric, supported on a 2.1 mm thick round tubular mild steel cantilever base with powder-coated finish. The rate shall include all matereial, fittings,unloading, transportation, assembly complete in accordance with the approved drawings, specifications and directions of the Engineer- in-Charge. . |
| 41 | SOFAS |
| 42 | OD94731/2026-2027 Supply of a standard three-seater sofa of approved make such as Godrej Interio, Durian, BOSQ, Featherlite or equivalent approved brand, with approximate overall dimensions of 1800 mm (L) × 800 mm (D) × 800 mm (H). The sofa shall comprise a sturdy and durable wooden frame with treated mahagony, high-density foam cushioning for the seat and backrest, and upholstery in good-quality fabric or rexine, with durable legs/supports and neat finishing. The item shall be complete in all respects, including loading, unloading, transportation and placement at site, as per the approved design, specifications and directions of the Engineer-in-Charge. |
| 43 | OD94735/2026-2027 Supply of a standard two-seater sofa of approved make such as BOSQ,Godrej Interio, Durian, Nilkamal, Featherlite or equivalent approved brand, with approximate overall dimensions of 1200 mm (L) × 800 mm (D) × 800 mm (H). The sofa shall comprise a sturdy and durable wooden frame, high-density foam cushioning for the seat and backrest, and upholstery in good-quality fabric or rexine, with durable legs/supports and neat finishing. The item shall be complete in all respects, including transportation and placement at site, as per the approved design, specifications and directions of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender