Tender For Revival And Restoration Of Shiv Nath Temple Naid Mohalla Bijbehara Anantnag [Adv. Cost ₹ 29.31 Lacs (₹ 24.84 Lacs Exclusive Of Gst + Gst@18% ₹4.47 Lacs)]
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Nov 2026
2 days left
EMD
58620
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revival And Restoration Of Shiv Nath Temple Naid Mohalla Bijbehara Anantnag [Adv. Cost ₹ 29.31 Lacs (₹ 24.84 Lacs Exclusive Of Gst + Gst@18% ₹4.47 Lacs)]
BOQ
| Sl. No. | Item Description |
| 1 | Part I |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 2.9.1 50 meter beyond 1 m from cutting edge |
| 3 | Supplying and laying of quarry stone soling hand packed tightly incl ramming watering and filling of interstices incl all carriage complete job including Head load 50m |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) incl all carriage complete job |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4(1 cement : 2coarse sand : 4graded stone aggregate 20 mm nominal size) incl all carriage complete job |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 gradedstone aggregate 20 mm nominal size) |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement lime mortar 1:1:6 ( 1 cement : 1 lime putty : 6fine sand) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. |
| 9 | Slabs, Columns, piers, abutments, pillars, posts and struts |
| 10 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 25mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing One face dressedFine chisel dressed |
| 11 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4(1cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 16mm (Area of slab over 0.5 sqm) |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete -Welded |
| 14 | Providing and applying lime putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 15 | Providing & fixing coated galvalume colour hi rib GI sheets 0.50 mm TCT having a erest fasteners height of reputed of 28-32make mm at with 195mm purlinspitch sheet using usingself selfdrilling drillingand andself self tapping tapping 471.38 fasteners (including cost of all material, leads, lifts and carriages etc upto site of work complete) with required head load complete. as approved by Engineer-in-charge |
| 16 | Providing & fixing of sign board of Acrylic Aluminium sheet as per by EIC Complete job |
| 17 | Providiing & fixing of gi kailash over the top of temple including coating primer & 2 coats of electric coating complete job as per eic |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 13622 (thickness to he specified by the manufacturer), of approved band cera kajaria johnson make, in all colours, shades except Burgundy, hotite green, black of any size approved by Engineers be-Clourge, in skirting, risers of steps and dades over 12 mm thick bed of cement mortar 1:3 ( cemem. 3 worse sand) and jointing with grey cement slurry to 3.3 kg per sqm.,. |
| 19 | P/L of 12mm Cement plaster of mix:1:4( 1 cement : 4 fine sand) |
| 20 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications on steel work |
| 21 | Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 22 | Distempering with oil bound washable distemper of approved brand (asian Paints / nerolac) and manufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer |
| 23 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 24 | Providing and Fixing factory made UPVC door frame, made of UPVC extrudedsections , of size 65 mm x 55 mm with wall thickness 2.0 mm ( ± 0.2 mm) , corners of the door frame to be mitred cut and jointed with plastic brackets andstainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fasteners, all complete as per manufacturer’s specification and direction ofEngineer-in-charge. |
| 25 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). |
| 26 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,sqm Providing and fixing 1mm thick M.S. sheet sliding-shutters with |
| 27 | Head load for varous Material given below for 100m |
| 28 | Soling |
| 29 | Cement |
| 30 | Aggregate |
| 31 | Bricks per 1000 no |
| 32 | Electric Part |
| 33 | Lighting point: One Lighting point shall incl, wiring for lighting points il 1.5 Sq.mm PVC insulated Copper wire & 2.5 Sq.mm PVC Insulate multi-strand Copper wire for lighting Sub- nains, 6 Amp one way swile 2 mm thick PVC conduit/Channel with bends, Junction boxes ele Amp S Pole MCB 10 Amp DP MCB, 2 way DB for Housing MCB an Hyle? Sheet with wooden bas recessed in walls with accessories including Concealed Bulb |
| 34 | One Fan point shall incl, wiring for Lighting points in 1.5 Sqm PVC insulated Multi-Strand Copper wire 1200 non ceiling fan/225 mm exhaust fan with ceiling roses & PVC Square block, 350 Watts electronic fan dimmer,2 mm thick PVC conduit/Channel with bends, Junction baxes etc, 6, Amp S Pole MCB, 10 Amp DP MCB, 2 way DB for Housing MCB for lighting circuits and Hylem Sheet with wooden box recessed in walls with accessories (Wall fan) |
| 35 | Wall mount fan |
| 36 | Exuast Fan |
| 37 | Heating point One Heating point shall incl, wiring for heating points in 2.5 Sq mm PVC insulated Multi-Strand Copper wire & 4 Sq mm PVC insulated multi strand Copper wire fur heating Sub-mains, 16 Amp switch socket combined, 2 mm thick PVC conduit/Channel with hends, Junction boxes ele, 10 Amp S Pole MCB, 2 way DB for Housing MCB and Hylem Sheet with wooden box recessed in walls with accessories |
| 38 | MCB switch 32amp |
| 39 | wiring connection from main board to main pole of 4sqmm thick |
| 40 | Conduit for electric supply |
| 41 | Providing fixing and installation of Flood light of 100watt each including wiringswitchescomplete job |
| 42 | Providing , fixing and installation of cctv cameras including wiring , PVR , poe switch , HDD complete job |
| 43 | Part II Dismantelling |
| 44 | Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceable materialwithin 50 meters lead as per direction of Engineer-in-charge:15.7.1 In mud mortar |
| 45 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In lime mortar |
| 46 | Engagement of Labours for Spreding and lifting of malbafrom temple yard including all etc complete job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender