Tender For Road Safety Work Of Dostpur Akbarpur Jalalpur Neori Road (Mdr-155E)
Tender Value
19 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
10 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
854
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambedkar Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work Of Dostpur Akbarpur Jalalpur Neori Road (Mdr-155E)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with bitumen (VG-10) using Bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. |
| 2 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 Percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. |
| 3 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects |
| 4 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per som area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35-2015 The finished surface to be level, uniform and free from streaks and holes. |
| 5 | Providing and laying of Repeated bar with hot applied thermo plastic compound 15 mm thick and 300mm wide including reflectorising glass beads @ 250 gms per sqm thcknes of 2.5 mm is exclusive of surface applied glass bed as per IRC 35 including cost of all materials, labour, machinaries, T&P etc. required for proper complation of work i/c all other charges and taxes . The finished surface tpo be level uniform and free from streks and holes as per MORTH specification no. 803 |
| 6 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (Speed limet Sign) |
| 7 | Retro-reflectorised Traffic signs as per IRC-67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 madeof highintensitygradesheetingtype-IV vide clause 801.3,fixe dover aluminium sheeting1.5mm thick supported on a mild steel angle ironpost 75mm x 75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cmx 45 cmx 60cm, 60cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for acertificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, linerremoval, adhesion, impactresistance, speculargloss and fungusresistance, 3years outdoor weathering and its having passed these tests shall be obtained from in ternational/Goverment Laboratory/ Institute by the manufacturer of the sheeting and in case the certificateis obtainedfrom international condition, it should also be obtained from Indian condition with in3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming toASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such as ituation, the Employer / Client, if sodesires, could seek for a performance guarantee whichwould bereleased after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends , letters ,numerals andborders etc shouldbeas per MoRTH specificationNo-801.3.7. Proofof the same in form of government report shall be uploaded while quoting tender.Stop Sign |
| 8 | T-Inter Section Major ahead |
| 9 | Rumble Strip |
| 10 | Side Road Right |
| 11 | Side Road Left |
| 12 | Two Way object Hazard Marker |
| 13 | Cross Road ahead |
| 14 | Single Chevron (Normal) |
| 15 | School ahead |
| 16 | Place Identification sign |
| 17 | Supply and fixing of pavement maker (Cat Eye) Type X-ASTMD-4956-04 Avery Dennison/3-M (USA Make) Consisting of ASA Plastic housing fitted with fightly adherent plotting compound. The housing shall contain prismatic two glass covered prismatic reflective face to reflect incident light i/c all tax. |
| 18 | Supply & Erection of built up overhead Contilever structure 6.00 M span comprising of one vertical post of 6.00 M high made up of 300 mm N.B. havey class M.S. pipe as vertical member welded with 10mm M.S. plate at top & bottom for bearing of horizantal frame comprising of 40 mm . N.B. made havey class main pipe as of 25 mm class medium N.B. pipe bracing as per approved designed drawing with one coat of steel primer and two coats of synthetic enamle paint complate the work includes construction of RCC fundation of size 750x750 mm & 1500 deep for built up Overhead Structure including earth work in excavation , 100 mm thick Lean Concrete in 1:4:8 cement , course sand and 40 mm gauge stone balllast , RCC with 1:2:4 cement , Course sand and 20 mm stone grit including supply of grouting of 25 mm dia foundation bolts (600mm long) as per provision of structure including cost of reinforcement & shutting as per direction of Engineer in Charge . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender