Tender For Special Repair To Roof Treatment Of Cook House Of Bldg No P-171 (A To E) Under Ge (South) Ambala Cantt.
Tender Value
48.82 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
19 days left
EMD
97640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Roof Treatment Of Cook House Of Bldg No P-171 (A To E) Under Ge (South) Ambala Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engineer-in-Charge. |
| 2 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material and labour for plain cement concrete 1:2:4 type B-0, (using 12.5 mm graded mechanically crushed stone aggregates) as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 4 | Supply only liquid water proofing compond complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material and labour for plain, cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in, levelling course, roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material and labour for 3mm thick APP (atactic polyproylene polymer) modified prefabricated five layer weight not less than 3.60 kg/sqm water proofing membrane black finish reinforced with non woven polyster matt and applying on top of it one coat of hot straight run bitumen grade 30/40 (Grade S-35) conforming to IS-73 at the rate of 1.2 kg/sqm, make as approved consisting of a coat bituminous primer @ 0.40 ltr/sqm by the same membrane manufactures of dercity 0.87 ro 0.89 kg/ltr at 25'C temprature and viscosity 70-160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end , the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete all as per standered parctice as per manufacture's instructions The vital physical and chemical parameters of the membrane shall be under:- (i) Joint strength in longitudinal and transverse direction at 23'c at 650/450 N/5cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane nor less then 150'c when tested in according with ASTM (d-5147) (iii) The laying if membrane shall be got down through the authriosed applicator or manufactures of membrane only including dismantling old APP membrane complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material and labour for precast PCC plain factory made tiles, 22 mm thick of size 250 mm x 250 mm, machine pressed and cut polished and set jointed and pointed in neat cement slurry and fabricated using grey cement and pigments. over and including 15 mm thick cement mortar (1:4) bedding joints grouted flush in cement mortar (1:3) over roof surfaces complete all as specified and directed by Engineer-in-Charge. |
| 8 | Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including dado any description complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material and labour for ready mix plaster of average thickness 15mm on brick work or concrete surfaces finished even and smooth including necessary scaffolding complete as per manufacture's instruction and complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkeline resistant primer on walls complete all as specified and directed by Engineer-in-Charge. |
| 11 | Demolition of brick work built in cement mortar or cement lime mortar including all arches pillars, quoins etc complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material and Labour for Brick work with sub class ‘B’ bricks, locally known as straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6), complete all as specified complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply and fixing 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed to walls celling or laid in floors including taking up or down old 15mm bore steel tubing complete all as specified and directed by Engineer-in-charge. |
| 14 | Supply and fixing 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed to walls celling or laid in floors including taking up or down old 20mm bore steel tubing complete all as specified and directed by Engineer-in-charge. |
| 15 | Refixing old serviceable steel water tubing of 20 mm bore, in new or old position, any grade, including supply and fixing new fittings as required, fixed to walls or laid in floors/roofs etc including necassary cutting/chasing/pinning in wall if required and making good the disturbed surfaces as per existing wherever required , including taking down of old tubing as existing at site and removal, complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material and Labour for PVC water storage tank 500 Litre capacity HDPE triple layer fixed and hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, including dismantling of old tanks of any description complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and Labour for PVC water storage tank 1000Litre capacity HDPE triple layer fixed and hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT including dismantling of old tanks of of any description complete all as specified and directed by Engineer-in-Charge. |
| 18 | Demolition and breaking up drain pipes 75/100 mm dia, SGSW, AC, PVC, concrete pipe including fittings, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Supply and fixing in repair of 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 20 | Supply and fixing in repair PVC (SWR) bends of 110mm radius, complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply and fixing in bands straps, supports or strays for rain waterpipes hooks stay for heavy large gates, hooks and pintle hinges clamps , hold fasts, wall ties,hooks and similar small items Fe 290 gde E-165 or Fe 310 complete all as specified and directed by Engineer-in-Charge. |
| 22 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-Charge. |
| 23 | Supply and fixing in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed by Engr-in-charge. |
| 24 | Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position of unframed/ framed work complete all as specified and directed by Engineer-in-Charge. |
| 25 | Supply and fixing of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material and labour for preparation of Old plastered surfaces of wall and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed by Engineer-in-Charge. |
| 28 | NOTE:- Amount of credit of Rs. 71,170.00 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender