Tender For Special Repair Of Drain And Boundary Wall At Jadunath Lines (Fafa) Of B&R-Ii (South) Under Ge(South) Ambala Cantt.
Tender Value
38.76 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
14 days left
EMD
77534
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Drain And Boundary Wall At Jadunath Lines (Fafa) Of B&R-Ii (South) Under Ge(South) Ambala Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding precast concrete articles and removal of debris complete all as specified and directed by Engineer-in-Charge. |
| 2 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided for and removal of debris complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material and labour for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete in surface channels and drains complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour for plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in foundation filling and mass concrete in surface channels and drains complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material and labour for Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6.00 mtr mean radius built in cement mortar (1:4), complete all as specified and directed by Engineer-in-Charge. |
| 6 | All as per Srl Item No 5.00 here-in-before but except bricks, complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material and Labour for plain cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in fixing of hold fasts, copings, bed plates,kerbs or mud stops, lintels upto 1.50m span, plinth courses , seismic and other bands and the like, finished the surface fair and even, including necessary form work complete all as specified and directed by Engineer-in-Charge. |
| 8 | Taking down Cement plaster on brick or stone walls including raking out joints hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material and Labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4, finished even and fair, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material and labour for rough cast plaster with and including 15mm thick rendering in CM 1:3 on brick wall or concrete surface as specified in clause 14.22 of SSR Part-I complete all as specified and directed by Engineer-in-Charge.Note:-(i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even.(ii) The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. |
| 11 | Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer on walls complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material and labour for preparation of Old plastered surfaces of wall and applying two coats of cement base paint on walls complete all as specified and directed by Engineer-in-Charge. |
| 13 | Demolition of RCC manhole covers including RCC slab set in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 14 | Material and labour for pre-cast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate as in cover slabs (for manhole, drain etc) and simililar articles with plain faces including necessary form work etc, set in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. (Note: Reinforcement shall be measured and paid separately under respective items ) |
| 15 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material and labour for Broken glass coping in Cement mortar 1:3 on top of walls, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position of unframed/ framed work complete all as specified and directed by Engineer-in-Charge. |
| 18 | Supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material and labour for two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface of any description over 10 cm in width or girth complete all as specified and directed by Engineer-in-Charge. |
| 20 | Dismantling for disturbed Razor Tape Concertina Coil any type over existing fenceing complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supply and fixing of Razor Tape Concertina Coil not less than 2.5mm thick of 600mm dia meter with uniform sapcing 8-9 inches tied with using binding wire between the embeded angle post complete all as specified and directed by Engineer-in-Charge. |
| 22 | Supply and fixing of galvanized 2 strand, steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc (each line of wire to be measured), including dismantling of deterioted barbed wire fencing complete all as specified and directed by Engineer-in-Charge. |
| 23 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds complete all as specified and directed by Engineer-in-Charge. |
| 24 | NOTE:- Amount of credit of Rs. 1,35,316.00 for retrieved materials is mentioned in Schedule of Credit Page No 21 & 22 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender