Tender For Repair/Replacement Of Roof Sheet, False Ceiling, Wind Ties, E/M Poles, Cables And Allied Works Due To Storm Damage Of Bldg No T-228 (Cook House), T-229 (Guest House), T-548 (Dining Hall) And T-554 (Cmp, annual maintenance contract & Eme Li
Tender Value
47.12 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
21 days left
EMD
94240
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Roof Sheet, False Ceiling, Wind Ties, E/M Poles, Cables And Allied Works Due To Storm Damage Of Bldg No T-228 (Cook House), T-229 (Guest House), T-548 (Dining Hall) And T-554 (Cmp, annual maintenance contract & Eme Living Room) At Teesta Tcp Works Under Para 35 Of Dwp 2020 Under Ge 867 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including nainital or salimar pattern roof coverings, etc. complete all as specified and as directed. |
| 2 | S&F pre painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, etc. complete all as specified and as directed. |
| 3 | S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, etc. complete all as specified and as directed. |
| 4 | Dismantling wrought iron or mild steel work of any description, etc. complete all as specified and as directed. |
| 5 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410-W (Gde 250 quality A), etc. complete all as specified and as directed. |
| 6 | S&F joist, channel, angle, flat iron or Tee sections, as in wind ties, cross bracings etc fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A), etc. complete all as specified and as directed. |
| 7 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamal paint over one coat of red oxide primer, etc. complete all as specified and as directed. |
| 8 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises, etc. complete all as specified and as directed. |
| 9 | M&L for 75 mm thick PCC type C-2 (1:3:6) (using 40mm graded stone aggregate) as in path, plinth protection, etc. complete all as specified and as directed. |
| 10 | M&L for PCC type C-2 (1:3:6) (using 40 mm graded stone aggregate) as in surface channels, drains including all necessary forms, moulds, mitred/ stopped ends and form work, etc. complete all as specified and as directed. |
| 11 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, etc. complete all as specified and as directed. |
| 12 | M&L for Chequered cement concrete tiles 20cm x 20cm x25 mm thick set jointed with grey pigment cement and pigments in neat cement slurry including 15 mm thick screed bed in cement mortar 1:6, etc. complete all as specified and as directed. |
| 13 | M&L for PCC type B0 (1:2:4) (using 12.5mm graded stone aggregate) AS in coping, coving, roof padding, as directing mixed with liquid water proofing compound, etc. complete all as specified and as directed. |
| 14 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling, etc. complete all as specified and as directed. |
| 15 | M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) block masonry with machine pressed sokid blocks,exc 10 cm in width setting in cement mortar 1:6, etc. complete all as specified and as directed. |
| 16 | Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 17 | M&L for 10mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces, etc. complete all as specified and as directed. |
| 18 | M&L for 15mm thick rendering in cement mortar in 1:4 on other than fair faces of brick work or concrete surfaces, etc. complete all as specified and as directed. |
| 19 | M&L for preparing new plastered or unplastered surfaces of wall and applying two coat of oil bound distemper over two coat of wall care putty, etc. complete all as specified and as directed. |
| 20 | M&L for complete removal of existing treatement and preparing plastered or unplastered surfaces of wall and applying two coat of oil bound distemper over two coat of wall care putty, etc. complete all as specified and as directed. |
| 21 | M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. over and including a coat of alkali resistant primer, etc. complete all as specified and as directed. |
| 22 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet, etc. complete all as specified and as directed. |
| 23 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre size of grid 605x605mm, etc. complete all as specified and as directed. |
| 24 | S&F 2mm dia hangers G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, etc. complete all as specified and as directed. |
| 25 | M&L for 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./ M.S. as per specification and drawing, etc. complete all as specified and as directed. |
| 26 | M&L for 4mm thick asbestos cement plain building boards, fixed or laid /inserted to GI snap grid framework with screw in ceilings, etc. complete all as specified and as directed. |
| 27 | M&L for three coats of white wash on AC boards ceiling, etc. complete all as specified and as directed. |
| 28 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drwaing, etc. complete all as specified and as directed. |
| 29 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall to make PVC Frame as per specification and drawing, etc. complete all as specified and as directed. |
| 30 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc. complete all as specified and as directed. |
| 31 | M&L for 10mm thick Virified Ceramic coloured tiles (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar 1:6, etc. complete all as specified and as directed. |
| 32 | M&L for 10mm thick Vitrified Ceramic coloured tiles (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm, in vertical suface like, dado and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick backcoat in cement mortar 1:4, etc. complete all as specified and as directed. |
| 33 | M&L for 7 to 8mm thick Coloured Non - skid Ceramic tiles area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed in cement mortar 1:6, etc. complete all as specified and as directed. |
| 34 | M&L for 7 to 8mm thick Coloured Non - skid Ceramic tiles area of each tile exc 0.18 sqm but n.exc 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backcoat in cement mortar 1:4, etc. complete all as specified and as directed. |
| 35 | M&L for 7 to 8mm thick Coloured Non - skid Ceramic tiles (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6, etc. complete all as specified and as directed. |
| 36 | S&F 7 to 8mm thick glazed ceramic coloured tiles of 450 x 350mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick backcoat in cement mortar 1:4, etc. complete all as specified and as directed. |
| 37 | Demolition of stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar, etc. complete all as specified and as directed. |
| 38 | M&L for 20mm thick Granite work of any type of table rubbed and polished as in steps, jambs, pillars, window cills, cooking plat forms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick screed bed in cement mortar (1:6) 100 mm stainless steel rawl plug of Hilti will be fixed @ 2 Nos per sqm, etc. complete all as specified and as directed.. |
| 39 | Taking down chowkhats or frame n.exc 1.50 Sqm and each with shutter (without taking off shutters from the frame), etc. complete all as specified and as directed. |
| 40 | Taking down chowkhats or frame exc 1.50 and n.exc 4 sqm each with shutter (without taking off shutters from the frame), etc. complete all as specified and as directed. |
| 41 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc. complete all as specified and as directed. |
| 42 | S&F Powder Coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, hinges, handles & towerbolts of 2 Nos each in door shutter, anodised aluminum snap beading screws, etc. complete all as specified and as directed. |
| 43 | S&F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, hinges, handles, towerbolts, anodised aluminum snap beading screws, etc. complete all as specified and as directed. |
| 44 | S&F Pressed steel frames of size 165x60 mm for door with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete all as specified and as directed. |
| 45 | S&F 30mm thick solid core construction flush shutters with blockboard core and plywood face panels, commercial type on both sides face is covered with decorative face veneer with lipping/frame to match, etc. complete all as specified and as directed. |
| 46 | M&L for steel windows with side hung shutters including necessory projecting type hinges, steel handle, towerbolts and steel peg stay, complete with glazing bars, dovetailed or welded, etc. complete all as specified and as directed. |
| 47 | M&L for steel windows with side hung shutters including necessary projecting type hinges, steel handles, towerbolts and steel peg stay, complete without glazing bars, dovetailed or welded, etc. complete all as specified and as directed. |
| 48 | S&F Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixing in openings, etc. complete all as specified and as directed. |
| 49 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification, etc. complete all as specified and as directed. |
| 50 | S&F steel ventilator with top hung shutter, including necessary hinges, steel handles, towerbolts, peg stay, etc. complete all as specified and as directed. |
| 51 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed. |
| 52 | S&F 125mm size Butt hinges of cold rolled mild steel heavy duty fixed with screws, etc. complete all as specified and as directed. |
| 53 | S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed with screws in floor, etc. complete all as specified and as directed. |
| 54 | S&F 200mm size aluminium anodised barrel tower bolts of extruded sections fixed with screws, etc. complete all as specified and as directed. |
| 55 | S&F 150mm size aluminium anodised cast type handle fixed with screws, etc. complete all as specified and as directed. |
| 56 | S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed with screws etc. complete all as specified and as directed. |
| 57 | S&F 25mm dia decorative type curtain rod (curtain rails), of stainless steel (SS-304 grade) including suitable selective choice decorative knobs and fixing brackets including taking down existing curtain rails, etc. complete all as specified and as directed by Engr-in-Charge. |
| 58 | S&F 4mm thick sheet glass oridinary quality exc 0.5 sqm in each pane including necessary glazing with oil putty, securing pins, etc. complete all as specified and as directed. |
| 59 | S&F 3mm thick sheet glass ordinary quality in n.exc 0.50sqm in each pane including necessary glazing with oil putty, securing pins, etc. complete all as specified and as directed. |
| 60 | M&L for prepration of old painted steel surfaces of any description, not otherwise described, over 10cm width & applying one coat of synthetic enamel paints, etc. complete all as specified and as directed. |
| 61 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, etc. complete all as specified and as directed. |
| 62 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of synthetic enamel paint, etc. complete all as specified and as directed. |
| 63 | S&F in repairs Vitreous Vitreous China wash basin, white, flat back of size 630x450mm including waste pipe, cuppling, cutting for pinning in ends of brackets or erecting stand, etc. complete all as specified and as directed. |
| 64 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern) including fixing bolts, CP Health faucet, seat cover, Paper holder, excluding flushing cistern and flush pipe, etc. complete all as specified and as directed. |
| 65 | S&F 10 ltr capacity low level PVC valve less, syphonic action type flushing cistern with inlet, ball valve float, flush pipe and handle including brackets, etc. complete all as specified and as directed. |
| 66 | S&F in repairs 15mm bore fancy type CP bib taps of cast copper alloy with crutch or butter fly handle with wall flange, screwed down, screwed for iron pipe or for brass ferrule, etc. complete all as specified and as directed. |
| 67 | S&F in repairs 15mm bore fancy type CP Stop cock of cast copper alloy screwed down high pressure with crutch or butter fly handle with wall flange, serwed at both ends for iron pipe or for unions, etc. complete all as specified and as directed. |
| 68 | S&F 15mm bore PTMT PVC connection of 450mm length with fixing screws, etc. complete all as specified and as directed. |
| 69 | S&F in repairs brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges etc. complete all as specified and as directed. |
| 70 | S&F in repairs Chromium plated shower roses with arms with or without swivel joints, including wall flange, fixing to steel pipe or union, etc. complete all as specified and as directed. |
| 71 | S&F in repairs 600 X 450 mm bevelled edge mirror, of selected quality glass, mounted on 6mm thick AC building board or commercial playwood and fixed to wooden plugs with chromium plated brass screw and cup washer, etc. complete all as specified and as directed. |
| 72 | S&F in repairs 15mm dia fancy type CP Pillar tap of cast copper alloy, capstan heads, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe, etc. complete all as specified and as directed. |
| 73 | S&F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, etc. complete all as specified and as directed. |
| 74 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps including taking down existing pipes, etc. complete all as specified and as directed. |
| 75 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps including taking down existing pipes, etc. complete all as specified and as directed. |
| 76 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), etc. complete all as specified and as directed. |
| 77 | S&F 1.25mm thick Mild steel sheet / PVC eaves gutters, 150mm dia, galvanised class 3, half round with rounded edges, etc. complete all as specified and as directed. |
| 78 | S&F 1.25mm thick/ PVC drop ends of 150mm dia Mild steel sheet for spigot or socket ends or nozzles, etc. complete all as specified and as directed. |
| 79 | S&F 1.25mm thick/ PVC stop ends of 150mm dia Mild steel sheet for spigot or socket ends or nozzles, etc. complete all as specified and as directed. |
| 80 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, etc. complete all as specified and as directed. |
| 81 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, etc. complete all as specified and as directed. |
| 82 | S&F 15 mm bore GI tubes of medium grade with and including all necessary GI fitting for fixing such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc to wall and ceiling or laid in/on floor, etc. complete all as specified and as directed. |
| 83 | S&F 20 mm bore GI tubes of medium grade with and including all necessary GI fitting for fixing such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc to wall and ceiling or laid in/on floor, etc. complete all as specified and as directed. |
| 84 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 85 | M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall with modular back plate and top cover for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black). 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights, etc. complete all as specified and as directed. |
| 86 | All as per serial item No. 2 here-in-before but for one bell/buzzer point controlled by one push button on the same board with other switches or independent, etc. complete all as specified and as directed. |
| 87 | All as per serial item No. 2 here-in-before but for one 5 Amp, 5 pin socket outlet point on same board with other switches including earth wire, etc. complete all as specified and as directed. |
| 88 | All as per serial item No. 2 above but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical plane, with cables, 1.5 sq. mm size, etc. complete all as specified and as directed. |
| 89 | All as per serial item No. 2 here-in-before but on independent board, etc. complete all as specified and as directed. |
| 90 | All as per serial item No. 2 here-in-before but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp, 6 pin socket on independent board, etc. complete all as specified and as directed. |
| 91 | All as per serial item No. 2 above but for one 3 pin socket outlet, 15 Amps on independent board but below the switch board of light points in the same vertical plane/horizontal plane, with cables, 2.5 sq. mm size, etc. complete all as specified and as directed. |
| 92 | S&F Modular switch, piano type, 5 Amp, single pole, one way, flush type, white or ivory, ISI marked, etc. complete all as specified and as directed. |
| 93 | S&F Modular switch, piano type, 15 Amp, single pole, one way, flush type, white or ivory, ISI marked, etc. complete all as specified and as directed. |
| 94 | S&F Modular socket outlet, 3 pin, 5 Amps, flush type, ISI marked, etc. complete all as specified and as directed. |
| 95 | S&F Modular socket outlet, 6 or 5 pin & 15 Amps, flush type, ISI marked, etc. complete all as specified and as directed. |
| 96 | S&F Modular bell push, 6 Amp, one module, 230V, etc. complete all as specified and as directed. |
| 97 | S&F Electric door bell, 230 V, multi music type, ISI marked, etc. complete all as specified and as directed. |
| 98 | S&F Lamp holder insulated, PVC / polycarbonate /bakelite body, etc. complete all as specified and as directed. |
| 99 | S&F in repairs 12W LED inverter Bulb, 230 Volts AC supply, etc. complete all as specified and as directed by Engr-in-Charge. |
| 100 | S&F Ceiling rose surface bakelite 65x50mm three terminal, etc. complete all as specified and as directed. |
| 101 | S&F 20W Energy efficient LED tube lights fitting of 4\\", 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, etc. complete all as specified and as directed. Make : Havells/Philips/Crompton |
| 102 | S&F 10W LED light fitting of mirror type with high out put diffuser 2 feet, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old u/s light fitting, etc. complete all as specified and as directed.Make : Crompton/ Philips/Havells. |
| 103 | S&F 15W LED light fitting of round/square shape, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, etc. complete all as specified and as directed. |
| 104 | S&F in repairs 36W ultra slim recess mounted LED luminaire OF 600 mm x 600 mm size with driver, for soft glare free light, AC 230 volt complete with all acessories and connections, etc. complete all as specified and as directed. |
| 105 | S&F 10W LED light fittings of decorative type surface mounted round plastic bulk head LED luminaire comprising of high brightness LED's, IP54 protection of 6000K complete fitting with LED lamp, driver and all other fixing accessories including electric connection connecting with using flexible copper wire twin core upto ceilling rose/connector including taking down old unserviceable light fitting of any type, etc. complete all as specified and as directed. |
| 106 | S&F in repairs 30W LED security light fitting of building with single piece new generation energy savng and environmental friendly, long life, made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia, 1.5 mtr long, fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminium cable, etc. complete all as specified and as directed. |
| 107 | S&F 25 Ltrs capacity Electric water heater storage type steel body and heating element upto 2 KW of BEE-5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece including anchoring bolts and making connection and testing, etc. complete all as specified and as directed. |
| 108 | S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep, min air delivery 210 CFM with service value 6.00, BEE-5 star rated with brushless direct current motor (BLDC), etc. complete all as specified and as directed. |
| 109 | S&F Exhaust fan of steel body AC single Phase, 230V of size 300m sweep with, blades, and frame and louvers, etc. complete all as specified and as directed. |
| 110 | S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, etc. complete all as specified and as directed. |
| 111 | S&F in repairs single pole & neutral DBs, 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar, etc. complete all as specified and as directed. |
| 112 | S&F MCB Single pole and neutral upto 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, etc. complete all as specified and as directed. |
| 113 | S&F MCB single pole (SP), 10 KA of 6 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, etc. complete all as specified and as directed. |
| 114 | S&F single pole and neutral enclosure with a 3 pin plug and socket complete with one single pole MCB 25 Amp 240 Volts(AC & Geyser ), etc. complete all as specified and as directed. |
| 115 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC type C-1 (1:3:6), 50 mm thick pre cast RCC type B-1 (1:2:4) for cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I, etc. complete all as specified and as directed. |
| 116 | M&L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia PVC conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit, etc. complete all as specified and as directed. |
| 117 | M&L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia PVC conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit, etc. complete all as specified and as directed. Make of wire :- Havels,Finolex, RPG,Standard, HPL. Please Enable Macros to View BoQ information |
| 118 | M&L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia PVC conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit, etc. complete all as specified and as directed. Make of wire :- Havels,Finolex, RPG,Standard, HPL. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender