Tender For S:-(A) Provn Of Rain Water Harvesting Near Mercury Lake Under Ge (West) Jabalpur(B) Provn Of Shed With Hardstanding Near Stn Auditorium Under Ge (West) Jabalpur(C ) Provn Of Shed With Plinth For Meditation/Yoga Near Cobra Integrated Sports
Tender Value
49.90 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
11 days left
EMD
99800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for S:-(A) Provn Of Rain Water Harvesting Near Mercury Lake Under Ge (West) Jabalpur(B) Provn Of Shed With Hardstanding Near Stn Auditorium Under Ge (West) Jabalpur(C ) Provn Of Shed With Plinth For Meditation/Yoga Near Cobra Integrated Sports Complex Under Ge West Jabalpur(D) Provn Of View Cutter For Bldg No P-206 Of Cobra Offrs Mess Under Ge (West) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft /loose soil.complete all as specified and as directed. |
| 2 | Excavation in trenches in soft /loose soil,n exc 1.5m wide and n exc 1.5m in depth ;for foundation etc.or for shafts well cesspit,maholes, pier holes etc.n exc 10 sqm on plan and n exc 1.50m in depth complete all as specified and as directed |
| 3 | Returing, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cms in soft /loose soil complete all as specified and as directed. |
| 4 | Removing excavated material not exceed 50 m depositing where directed level n exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 5 | M&L Hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 6 | M&L fro Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed. |
| 7 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 8 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate in copings, kerbs, and the like all as directed incl necessary form work |
| 9 | M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed. |
| 10 | M&L for brickwork with fly ash old sized bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 etc all as specified and as directed. |
| 11 | M&L brick work with sub class'B' bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed. |
| 12 | M&L for Brick work with Fly ash, old size sub class 'B' bricks of compressive strength not less than 75 Kg/sqcm, straight or curved on plan exc 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 13 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish all as specified. |
| 14 | M&L for formwork curved surface flat rough finished surface faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed. |
| 15 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed. |
| 16 | Mild Steel TMT bar 6 to 8mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete. |
| 17 | M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed |
| 18 | M&L for Cement concrete of type C2 (1:3:6) 20 MM graded aggregate in surface channels and drains etc all as specified and as directed |
| 19 | M&L cement concrete type C-2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete. |
| 20 | Taking down cement plaster of any description on wall and ceiling in patches incl taking out joints, hacking for key, scrubbing down with water etc complete. |
| 21 | M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed. |
| 22 | M&L non skid ceramic coloured joint free tiles 7 to 8 mm thick (square/rectangular) are of each tiles exceeding 0.18 sqm but n.exc 0.38 sqm (600x600) in floors et and jointed in neat cement slurry and paointed in white cement to over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed . |
| 23 | M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)ung marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 24 | M&L 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed |
| 25 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4.etc all as specified and as directed. |
| 26 | M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth wihtout using extra cement complete all as specified and directed |
| 27 | M&L for 15mm thick rendering in patches in CM 1:6 on fair faces of brick masonry including finishing even and smooth finish without using extra cement complete all as specified. |
| 28 | M&L rendering on concrete/brick surfaces 15mm thick in CM 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified .( Note:- WPC measured and paid saperately) |
| 29 | M&L for Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of alkali reststant primer complete all as as specified and as directed. |
| 30 | M&L for Preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 31 | S&F, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed. |
| 32 | M&L for Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 3.0 m, as directed by Engineer-incharge. |
| 33 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape,etc., n exc. 1.5 m high from base complete all as specified and as directed. |
| 34 | Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape,etc., exc. 1.5 m but n exc 3.0 m high from base complete all as specified and as directed. |
| 35 | M&L for Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed. |
| 36 | M&L for filling coarse filler of gravel/stone aggregate over traverse of size 10 mm to 12.50 mm upto height of 3.00 mtr spreading and levelling in layers n exc 25 cm thick well ramming including watering as required complete all as specified and as directed. |
| 37 | M&L for filling of sand with mixed with cement in ratio of 1 : 12 ,spread over traverse upto height of 3.00 mtr spreading and levelling in layers n exc 25 cm thick as required slope well ramming including watering as required complete all as specified and as directed. |
| 38 | M&L for excavating in hard and dense soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outetc all as specified and as directed. |
| 39 | M & L for stone boulder pitching with random rubble including grouting with cement sand mortar 1:6 complete all as specified and directed. |
| 40 | M&L for RCC M-25 (Design Mix ) 20 mmm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed. |
| 41 | M&L for RCC M-25 (Design Mix ) 20 mmm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 42 | M&L for RCC design Mix M-25 using 20mm graded stone aggregate as in slab supported on walls as in kichen plateform complete all as specified and directed |
| 43 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped endsetc all as specified and as directed. |
| 44 | M&L for Reinforced concrete pipes of bore dia 450 mm, class NP-3, laid and jointed complete with collars all as specified and as directed |
| 45 | Excavating in post holes (or similar holes) each n.exc 0.5 cu.m getting out, returning filling in and ramming earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft and loose soil. |
| 46 | S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified |
| 47 | S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 48 | M&L Painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified. |
| 49 | M&L for Roof trusses (framed), trussed,post,rafters, purlins, tube crane, gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, wind ties etc. conforming Fe 410 -W (GdeE- 250) quality ''A'' complete all as specified and directed. |
| 50 | S&F Steel work in tubular trushes including special shaped washer etc complete using ERW or induction but welded tubes confirming to IS 1161-1979 grade St. 240 etc complete all as specified and directed |
| 51 | M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 20mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed. |
| 52 | S & F 35 mm thick factory Made moulded glazed/gauged door with pre pressed lamination on both side, solid core construction & prepaid to receive glass/wire mesh including fixing of SS wiremesh of nominal dia 0.36 mm , 2 Nos door Aluminium handle, 0.3 Nos SS butt hing of 100mm , 2 nos Aluminium tower bolt 150mm length in each shutter complete all as specified in SSR Part I and as directed and fitted to chowkhats. |
| 53 | S & F 35 mm thick Factory made moulded flush door with pre pressed lamination on both side, solid core construction 2 Nos Aluminium door handle, 0.3 Nos SS butt hing of 100mm , 2 nos Aluminium tower bolt 150mm length and 300 mm length Aluminium sliding door bolt in each shutter complete all as specified in SSR Part I and as directed and fitted to chowkhats. |
| 54 | S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints |
| 55 | M&L for box type section for door frame for fixing of door shutter of single channel/double shutter etc complete as specified and directed. |
| 56 | Supply and fixing for aluminium alloy (powder-coated) door shutters with hollow aluminium sections as specified including aluminium powder coated snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, Mortice lock 4 levers (vertical type), two numbers of aluminium alloy anodized tower bolts 200mm long to each leaf, etc. including fixing frame to wall/RCC members with rawl plugs complete. Sections of doors shall be aluminium hollow sections as follows : - (a) Shutter top 83.50mmx44.45mmx1.87mm thick. (b) Shutter bottom 104.00mmx44.45mmx 1.80mm thick (c) Shutter vertical 83.5mmx44.45mmx1.87mm thick (d) Shutter middle 100.00mmx 44.45mmx 2.00mm thick (e) Gauging clip weighing not less than 0.097kg/metre (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. 2. Glass pane shall be measured and paid separately.) |
| 57 | S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge |
| 58 | S & F Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete including necessary welding if fixed in steel door. |
| 59 | Supply only liquid water proofing compound. |
| 60 | M&L for preparation of new decorated surfaces of walls and applying two coat of oil bound distemper over and including wall care putty 1 mm thick over a coat of primer complete all as directed. |
| 61 | M & L for two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surfaces of any description exc 10 cm width or girth. |
| 62 | S&F Floor door stopper having overall length of cover plate 50 mm , cast aluminium alloy body and tongue anodised with double leg ,fixed in floor complete |
| 63 | M & L, aluminium grills(Decogrill) 40 mm size and fixed including necessary glazing clips, anodized aluminiunm snap beading screws and aluminium fittings complete all as specified and directed. |
| 64 | S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and as directed. |
| 65 | S & F curtain rod 20 mm dia stainless steel with brackets(size 18 x 3 mm -L shape ) stops, rollers etc. and fixed in position complete. |
| 66 | S&F door closer hydraulically regulated designation No-2 universal type of aluminium body extruded section fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & wt between 36-60 kgcomplete all as specified and directed by Engr-in-charge. |
| 67 | S&F Mortice lock,vertical type size 100 mm 4 lever suitable for aluminium door including fixing with stainless steel screw as complete all as specified ( Make : Godrej or equivalent )and directed |
| 68 | S&F solar control film 25 micron reflective type (garware sun control or equivalent) all as specified and directed by Engr-in-charge. |
| 69 | Supply & fixing frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm or any other size stainless steel (202) pipe including cutting & necessary welding as per drawing. |
| 70 | M&L MS Work as in wind ties for roof including securing boplts drilling holes, notching for wire etc complete all as directed |
| 71 | S&F in repair 18 mm thick ply , PVC sheet Prelaminated on one side with approved texture (\\"Celuca ply of Rajshree make or equivalent in \\"sintex\\" as approved by GE) as in kitchen cabinet ( with shelves and partition ) including necessary fittings & fixtures as per manufacture's instrucions complete all as specified and directed by Engr-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender