Tender For Shifting Of 500Kva Sub-Station At Shastri Nagar W. No. 13 Bemc
Tender Value
9.26 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
9 days left
EMD
9300
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Shifting Of 500Kva Sub-Station At Shastri Nagar W. No. 13 Bemc
BOQ
| Sl. No. | Item Description |
| 1 | 11 MTRS WPB (160X152 MM2) (30.44kg per meter) GI with base plate & stiffner (10.74kg) |
| 2 | Earthing support (coil type) |
| 3 | No-8 GI Wire Dia 4.6mm 0.131Kg/mtr - 2mtr each pole connecting pole with Coil earthing. |
| 4 | Top Pressure GI channel 100x50x6mm, 2.8mtr long 2Nos (@9.2kg/mtr) |
| 5 | DP structure supporting GI channel 100x50x6 mm each 2.8mtr. Long ( @9.2Kg/mtr)x 4Nos |
| 6 | Angle for cross bracing 50x50x6mm Angle (3.5mtrs. Long 2 nos.) @ 4.5Kg/mtr |
| 7 | AB switch and H.G fuse mounting GI channel 75x40x6mm,2.8mtr long 4nos (6.8kg/mtr) |
| 8 | Cantilever GI channel for supporting AB Switch arm, 75x40x6-1 mtr. Long, 2 nos.(6.8 K.g. per mtr.) |
| 9 | Cantilever Angel for supporting AB Switch 50x 50 x6 mm Angel (2mtrs. Long 2 nos.) @ 4.5Kg/mtr |
| 10 | GI Angle for mounting LT distribution Box 50x50x 6 mm MS Angel -2.5 mtrs.each Long 2 nos.( 4.5 K.g. per mtr.) |
| 11 | 11kv Disc Insulator( B& S) 70KN polymer |
| 12 | 11 KVHW fitting (B&S)3bolted bolted |
| 13 | 11KV AB Switch 3 Pole (400 Amp) |
| 14 | Lightening arrester (9KV, 10KA) |
| 15 | H.G. Fuse(11 KV,200 A,3 Pole, 50Hz) Polymer type insulator (Horizontal Mount) |
| 16 | HT stay set (complete) |
| 17 | HT Stay insulator |
| 18 | HT Stay clamp(1.95Kg/mtr) |
| 19 | 7/10 SWG G.I stay wire |
| 20 | 1Cx630 mmsq (Armoured) LT XLPE Cable(from DTR to LTDB) 4nos 8mtr each RC Rate |
| 21 | 80mm2 AAAC |
| 22 | G.I pipe earthing 40mm dia medium gauge 3mtr long |
| 23 | 25x4mm GI Flat for (Neutral) and Body earthing of Metering Panel |
| 24 | 25x6mm GI Flat for Sub Station earthing |
| 25 | GI Nut , Bolt & Washer of different sizes |
| 26 | GI barbed wire anticlimbing device 3Kg. Per support |
| 27 | Back Clamp for anticlimbing device 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (8x0.59x0.510) |
| 28 | Back Clamp for danger Plate 25X3 mm. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (1x0.59x0.510) |
| 29 | Black Paint |
| 30 | Yellow Colour Paint for Background RC Rate |
| 31 | Sundries (Al binding tape, Insulation tape, etc.) |
| 32 | 11 MTRS WPB (160X152 MM2) (30.44kg per meter) GI with base plate & stiffner (10.74kg) |
| 33 | Earthing support (coil type) |
| 34 | No-8 GI Wire Dia 4.6mm 0.131Kg/mtr - 2mtr each pole connecting pole with Coil earthing. |
| 35 | 100x50x6mm MS Channel (9.2Kg/Mtr) with Galvanization @ 1.5 Mtr long2Nos per pole for Cantilever arrangement (Pin Point) |
| 36 | 50x50x6 mm M.S Angle(4.5 KG /Mtr)with Galvanization @ (2.25+2.25) mtr long 2nos per pole (Pin Point) |
| 37 | GI Back Clamp for supporting in pole with channel (02nos) and 02 nos for supporting angle 1.7 Kg/each |
| 38 | 11 KV Pin Insulator Polymer |
| 39 | GI nuts, bolts and washers |
| 40 | 100 mm2 AAAC conductor |
| 41 | Danger Board |
| 42 | G I Barbed Wire anticlimbimg device 3. kg per support |
| 43 | GI Clamp for Danger Board GI Flat(25X3 @0.6 Kg/Mtr) 510 mm length(0.306 Kg/Piece) |
| 44 | GI clamp for anti Climbing Devicev25X3 mm Flat (0.6 Kg /Mtr) Flat of 0.510 Mtr Length =4 No.s /Pole(1.22 KG /Pole) |
| 45 | Black Paint |
| 46 | Yellow Colour Paint for Background |
| 47 | Sundries |
| 48 | Pole Clamp for Holding of Supporting of Eye Hook and Dead End Clamp |
| 49 | Suspension Clamp with EYE hook For ABC |
| 50 | Dead End Clamp |
| 51 | Cap Cable End for ABC 95 SQMM |
| 52 | Piercing Connector Type -B Main |
| 53 | (4x95+1X95+1X16) sqmm LT XLPE AB Cable |
| 54 | GI nuts,bolts and washers |
| 55 | Boundary wall with sand filling and metal spreading, Fixing of Iron gril gate with locking arrangement etc as per TPSODL specification |
| 56 | Civil cost for making TRF plinth for 500 KVA . Provide necessary civil material, manpower, machinery for construction of plintj as per standard drawing |
| 57 | Reerrection of 500 KVA, 11/0.4KV Plinth mounted S/S |
| 58 | Couping with C.C. 1:1.5:3, 0.1125 Cum @ Rs.6648.85 |
| 59 | Concreting of support C.C. 1:1.5:3, 0.45 Cum. @ 6648.85/- for 11 Mtr. WPB Pole |
| 60 | Cement concreting for stay anchor plate with C.C. 1:2:4, 0.2 Cum @ 6177.92/- |
| 61 | Material for masonary work for earth pit with charcoal, salt etc and RCC slab cover. |
| 62 | Dismantle of 500KVA, 11/0.4KV Iron framed mounted DSS |
| 63 | Dismatling charges of LT pole PSC |
| 64 | Dismantle of LT line (02 Span) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender