Tender For Repair To Joinery, Flooring, Plastering, Plumbing, Sanitary, Periodical Work, And Other Misc B/R Works In Md Accn Of Cod Under Aor Of Age B/R-I Under Ge (North) Delhi Cantt-10.
Tender Value
47 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
9 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery, Flooring, Plastering, Plumbing, Sanitary, Periodical Work, And Other Misc B/R Works In Md Accn Of Cod Under Aor Of Age B/R-I Under Ge (North) Delhi Cantt-10.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of plain cement concrete (unreinforced) of any thickness of any description and in any position not specifically provided for complete all as specified and as directed. |
| 2 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement.including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 3 | Ditto- but in vertical surface as skirting, dado and risers to steps over and including10 mm thick rendering/backing coat in cement mortar 1:4 all as specified and directed. |
| 4 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 5 | M&L glazed ceramic coloured tiles in vertical surface area of each tile 0.07 to 0.15 Sqm each set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified & directed. |
| 6 | S&F for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors/skirting etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match complete including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed |
| 7 | Ditto- but in vertical surface as skirting, dado and risers to steps over and including10 mm thick rendering/backing coat in cement mortar 1:4 all as specified and directed. |
| 8 | M&L for providing 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregates as in leveling course of floor rough surface to receive floor tiles complete all as specified. |
| 9 | M&L for 75mm thick type-D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base to receive stone slab and pavement all as specified and directed. |
| 10 | M&L 20 to 25 mm thick pre-polished machine cut Kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed. (Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above). |
| 11 | M&L 20 to 25 mm thick pre-polished machine cut Kota stone slab as in riser or vertical surface over and including 10 mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. (Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above). |
| 12 | M&L Granite 12-18 mm thick colour as approved ( of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over 15mm thick screed bed in cement mortar 1:6), including moulding of edge of granite.all as specified and directed including dismantling old slab/tile incl bedding comlete all as specified and as directed. |
| 13 | M&L for applying two coats of Oil Bound Distemper on old plastered/unplastered surface of wall using Airless spray technology withmax working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note - Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc by skilled labour. Step 1- Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 14 | M&L for preparation of old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 15 | M&L for applying two coats of Oil Bound Distemper on old plastered/unplastered surface of Ceiling using Airless spray technology withmax working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note - Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc by skilled labour. Step1- Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 16 | M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 17 | M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 18 | M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (external surfaces) finished even and smooth including taking down cement plaster from wall all as specified and directed. |
| 19 | M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even and smooth including takingdown existing cement plaster from wall all as specified and directed by GE. |
| 20 | M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth including taking down cement plaster from ceilling all as specified and directed by GE. |
| 21 | M&L for brick works withsub class 'B' bricks straight or curved on plain exc 6 m mean radius built in cement mortar 1:6 incl Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed. |
| 22 | M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even and smoothl all as specified and directed by GE. |
| 23 | M&L for applying two coats of Oil Bound Distemper on new plastered/unplastered surface of wall using Airless spray technology withmax working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note - Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over M&L waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc by skilled labour. Step 1- Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface complete all as specifiec and as directed. |
| 24 | M&L for preparation of new plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer complete all as specifiec and as directed. |
| 25 | M&L for applying two coats of Oil Bound Distemper on New plastered surface of Ceiling using Airless spray technology withmax working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note - Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc by skilled labour. Step1- Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface. |
| 26 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete. |
| 27 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete. |
| 28 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete. |
| 29 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 75mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete. |
| 30 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 31 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.50 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 32 | S & F in repair sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long. |
| 33 | S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate mix with WPC complete all as specified and as directed. |
| 34 | S & F in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete. |
| 35 | S & F in repair Brass CP mixer/wall mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore including connection pipe and fittings complete . |
| 36 | S&F in repair 10 litre capacity PVC low level flushing cistern with dual flush type‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600 mm long complete. |
| 37 | S & F in repair PVC connection 600mm long and15 mm dia with brass fly nut at both ends complete. |
| 38 | S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including trap and plain cement concrete bedding, outgoing flushing pipe, anti syphonage pipe etc complete. |
| 39 | S&F in repair Chromium plated brass angle valve concelled type for 15mm bore pipe, fixed in repairs complete all as specified and directed. |
| 40 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 41 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 42 | Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed |
| 43 | Refixing of shutter exc 1 Sqm but n. exc 2 Sqm after necessary repairs in the same opening incl taking down complete all as specified and as directed. |
| 44 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 45 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 46 | S&F Factory Made double rebated extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made |
| 47 | Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panneled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” (Note: Fixture/fittings shall be measured & paid under relevant item except meshes) |
| 48 | S&F double rebated,Pressed steel frames of size 60 x 125mm for doors including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,supplied and fixed. |
| 49 | S&F box type mild steel window glazed/gauzed incl frame made of hollow section 60x25x1.25 mm thick 50mm x 20mm x 1.25mm thick MS hollow pipes as in windows shutter with or without sash bar incl 150mm size MS tower bolts 2 Nos each leaf, MS handle made of Z section 100 mm long 2 Nos each leaf,mild steel cheat 55 mm x25mmx75mm long 2 Nos each leaf,mild steel cleat 55 mmx25mmx75mm long,MS pintel hing 75 mm long 14 mm dia 02 Nos each leaf complete all as specified and as directed. |
| 50 | S&F 35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebeated sash bars, any numbers, wooden beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a) and as directed. |
| 51 | S&F Flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beading complete. |
| 52 | S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 53 | S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as Specified.Note : The manufacturing test certificate (MTC) is to be provided and authantication certificate/Logo/hologram/barcode of the make/manufacturer must be there on the product. |
| 54 | S&F in repair sheet glass ordinary quality, 4 mm thick and glazing with oil putty in square n.exc. 0.5 Sqm in each pane at ht upto 15 metres complete all as specified and directed. |
| 55 | S&F sheet glass ordinary quality, 4 mm thick and glazing with oil putty in square n.exc. 0.5 Sqm in each pane at ht upto 15 metres complete all as specified and directed. |
| 56 | S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel wire staples, wooden beads, tinned tacks to steel windows and wooden doors shutters complete. |
| 57 | S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel wire staples, wooden beads, tinned tacks to steel windows and wooden doors shutters complete. |
| 58 | M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete. |
| 59 | M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete. |
| 60 | Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified. |
| 61 | “S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made froms Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company: For WC/Bathroom/Toilet/Kitchen & Cabinets.” |
| 62 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet. Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive strength of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company: For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 63 | S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete. |
| 64 | S & F Continuous (piano) hinges of width 30mm when open flap) , mild steel, bright finish or electrogalvanised |
| 65 | S&F 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete |
| 66 | S&F 4 levers brass cupboard locks grade-I, size 65 mm |
| 67 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete |
| 68 | S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete |
| 69 | S&F butt hinges, 100 mm size medium weight, cold rolled mild steel complete |
| 70 | S&F aluminium handles 150 mm size cast type, anodised complete |
| 71 | S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete. |
| 72 | Disconnecting existing tanks of capacity exc 250 Ltrs and n exc. 500 ltrs, setting aside (or lowering if required) for rapairs, cleaning, etc. and hoisting if required reconnecting and refixing in position. (Cleaning repairing, etc measured separately) |
| 73 | M&L for Cleaning and removing all scale and dirt, etc from tanks of capacity exc 250 & n exc 500 ltrs and from mouths of circulating pipes etc. |
| 74 | Dismantling PVC water tanks of capacity exc 250 Ltrs but n.exc 500 Ltrs from roof all as specified and directed . |
| 75 | S&F Rotational moulded polyethylene water storage tanks in white colour (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes all as specified and directed. |
| 76 | S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete. |
| 77 | S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 25 mm bore size (Minimum weight 210gms), complete. |
| 78 | S & F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 25 mm bore size (Minimum weight 210gms), complete. |
| 79 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and as directed. |
| 80 | S&F in repair Stainless steel plate rack (utensil rack) of size (600 mm x 750 mm) and depth 250 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts complete. |
| 81 | S&F Stainless Steel Cromium Plated tubing of 25 mm dia curtain rod fancy type including fancy type CP brabs brackets (wall to wall or flush to wall) with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete. |
| 82 | M&L for preparation of old plastered surfaces of wall and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm using auto-roller and airless paint sprayer complete all as specifiec and as directed. |
| 83 | Material & labour for PCC (1:3:6) Type C-2 (20 mm graded aggregate) as in plinth protection/hard standing incl finishing the concrete surface even and smooth w/o using extra cement complete all as specified.(Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume of plinth protection) |
| 84 | M&L for mild steel framed work such as grills, gratings, gates , cooler stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; fixed type window frame , door chowkath, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including primer complete all as specified and directed. |
| 85 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thk of an colour having tensile strength of 550 Mpa as window/door chajja (sunshade) of overall projection/width 0.75 metre from the face of the wall, fixed with self tapping screw; supported on fabricated MS angle (50x50x6mm) cantilever brackets (right angle traingle shape) at max 1.2 m c/c with Longitudinal stiffener/runner angle (50x50x6mm) running continuously along the front drip edge and rear wall edge, fully shop-welded to the triangular brackets., painted with two coats of synthetic enamel paint over one coat of red oxide; Vertical legs (0.45 m length) of brackets secured/anchored to masonry wall /RCC lintel with 10/12 mm expansion fasteners(minimum 2 to 3 Nos. per bracket); rear edge chased 50 mm into wall, grouted with waterproof CM 1:3 and sealed with neutral silicone; including cutting chases, drilling holes, staging, and making good disturbed plaster to match adjacent wall surfaces and demolition of old RCC chajja complete, all as specified and directed by Engr-in- Charge. |
| 86 | Removing of existing water proofing membrane, damage plaster, vegitation/plants, PCC any thickness, Tar-felt, loose particles and all forgin materials over the roof and shifting the debris from site to out-side area as directed by authority on factory garbage area. |
| 87 | Taking down brick tiles, terracing tiles, single layer from roof laid, bedded and pointed in any mortar all as specified & directed. |
| 88 | Demolition of cement concrete mud phuska of any description and in any position not specifically provided for complete all as specified and as directed. |
| 89 | M&L PCC 1:2:4 type B-0 padding on roof as in leveling to making slope, surface finished even and smooth without using extra cement. |
| 90 | APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) removing and Cleaning existing damaged APP membrane from roof surface and clean all cement mortar and vegitation, plants with roots properly.(b) Applying oil bound bitumen primer @ 0.40 Kg/Sqm over 10mm thick plastering in CM (1:4) with WPC @ 3% by weight of the cement.(c) Apply a coat of hot bitumen 85/25 grade @ 1.60 kg/sqm.(c) Apply standard quality APP modified polymeric memrane minimum 3mm thick over the bitumen coat joints to be touched hot and width of overlaps shall e 75 mm length wise and 100mm widthwise of the membrane.(d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. |
| 91 | APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) removing and Cleaning existing damaged APP membrane from roof surface and clean all cement mortar and vegitation, plants with roots properly.(b) Applying oil bound bitumen primer @ 0.40 Kg/Sqm over 10mm thick plastering in CM (1:4) with WPC @ 3% by weight of the cement.(c) Apply a coat of hot bitumen 85/25 grade @ 1.60 kg/sqm.(c) Apply standard quality APP modified polymeric memrane minimum 3mm thick over the bitumen coat joints to be touched hot and width of overlaps shall e 75 mm length wise and 100mm widthwise of the membrane.(d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane. |
| 92 | S & F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner. |
| 93 | M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in string courses copings or as floors. |
| 94 | M&L for 15 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) mixed with WPC @ 200 ml @ 50 Kg of cement complete all as specified and dierected. Note : WPC shall be measured and paid separately |
| 95 | Supply only liquid water proofing compound Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender