Tender For Renovation / Alteration Work Services At S/By Bcr Location At Af Stn Bkt
Tender Value
4.84 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
3 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation / Alteration Work Services At S/By Bcr Location At Af Stn Bkt
BOQ
| Sl. No. | Item Description |
| 1 | Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed.(Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid). |
| 2 | Taking down Shutter of any description not exc 1 sqm each all as specified and directed. |
| 3 | Taking down Shutter of any description exc. 1 sqm and not exc . 2 sqm each all as specified and directed. |
| 4 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window & other Frames/ Chowkhat of size 75x50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 5 | S&F in factory single extruded WPC (Wood Polymer Composite) solid decorative type 10mm deep CNC moulding design with 0.12 micron laminated both sides shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). |
| 6 | S&F 100 mm size stainless steel butt hinges with galvanised MS hinge pin etc. complete all as specified and directed. |
| 7 | S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed. |
| 8 | S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed. |
| 9 | S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed. |
| 10 | S&F Anodised aluminium three track frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 11 | S&F in Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 12 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and directed. |
| 13 | Supply and fixing Sheet, ordinary quality in squares not exc 0.5 sqm each pane 4mm thick complete all as specified and directed. |
| 14 | S&F in repair 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and directed. |
| 15 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed. |
| 16 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed. |
| 17 | S&F in repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen oe laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 18 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 20mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction of Engineer-in-charge. |
| 19 | S&F in repair rotational molded polyethylene water storage tanks (white colour, tripple layer) (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position after dismantling (water tank of cap exc 250 ltr and n.exc 500 ltr) and removing to store and complete all as specified and directed. |
| 20 | S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia complete all as specified and directed. |
| 21 | S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes complete all as specified and directed. |
| 22 | M&L for 75mm bore sand cast iron pipe in any length including jointing with cement, in floor/trench complete all as specified and directed. |
| 23 | Supply & Fixed cast iron bend 75mm bore complete all as specified and directed. |
| 24 | Supply & Fixed branch pieces cast iron single (equal or unequal) 75mm bore complete all as specified. |
| 25 | M&L for repairs 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate complete all as specified and directed. |
| 26 | M&L for 15mm thick rendering in cement mortar (1:6) on brick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 27 | M&L for applying 1 mm thick wall care white putty in two layers white wall care putty on walls complete all as specified and directed. |
| 28 | M&L for preparation and applying two coats of oil emulsion distemper over one coat of primer on new putty surfaces of walls complete all as specified and directed. |
| 29 | Complete removal or existing treatment on wall/roof projections including fascia cornices etc by scrapping with mechanical sander (having mechanical vaccum machine, scruber) with sanding pad adjustable size according to high of building of appropriate grit to make surface clean free from dust loose paint etc by skilled labour complete all as specified and directed. Note: Contractor shall ensured that all deployed labour's on operations, like painting & misc building repairs & maintenance work, electricity subjected repairs & instrallation and its testing related have to maintained according to CA & related regulated other agency norms as followed, No extra demand will be occured on department on this account. |
| 30 | M&L for preparation of newly putty surfaces of walls and applying two or more coats of 100% premium acrylic emulsion in Comouflaging tri or other pattern having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltrs/ 10 Sqm over and including priming coat of exterior primer applied @0.9 ltr/10sqm over new by prepare surface complete all as specified and directed. |
| 31 | S&F in repairs Brass Hat and coat hooks, solid body, 175mm to 250mm complete all as specified and directed. |
| 32 | S&F for mild steel framed work as in door chowkats/gate of angle or angle iron work as in fixing of cooler stand by drilling/cutting the stone masonry wall and fixing up to 1st floor walls, other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides), complete all as specified and directed. |
| 33 | M&L for two coat of synthetic enamel painting to steel surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of red oxide primer complete all as specified and directed. |
| 34 | Material and labour for providing reinforced cement concrete 1:2:4 type B1 using (20mm graded stone aggregate ) as slab supported on wall, beam, cantilevers including necessary formwork complete all as specified and directed. |
| 35 | M&L for mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 36 | Excavating in post holes (or similar holes) each n.exc0.5cum, getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick, complete all as specified and directed. |
| 37 | M&L for removing excavated material not exc. 50 m and depositing in soft/hard soil, where directed . |
| 38 | M&L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregates in subbase, foundation, filling and mass concrete complete all as specified and directed. |
| 39 | M&L for cement concrete (1:2:4) type B-1 using (20mm graded aggregate) Nominal mix in foundation, filling, post holes, hardstanding/ pavement and mass concrete including necessary formwork complete all as specified and directed. |
| 40 | M&L for rolled mild steel sections or MS pipe round/square as in posts, rafters and purlins or trusees or plates etc . where connected to common rafters and runnuing rails fixed with angle cleats or other connecting plates, nut bolts etc. confirnimg to Fe-290 ( Gde E-165). |
| 41 | S & F for MS steel as in base plate, gusset plate etc welded or riveted to steel staircases including holding down bolts, nuts, rivets etc confirming to Fe 410-W (Gde-E-250) quality - A complete all as specified and directed. |
| 42 | S & F 0.50 mm thick pre painted galvalume coloured aluminium zinc coating AZ-150 GI based corrugated steel coloured having tensile strength of 550 Mpa as in roof covering & ridge fixed with self tapping screws etc complete all as specified and directed. |
| 43 | M&L for mild steel flat iron in wind ties for roof including securing bolts etc. complete all as specified and directed. |
| 44 | Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all as specified and directed. |
| 45 | M&L for Brick work with old size fly ash bricks straight or curved on plan exc 6m nean radius and setting in cement mortar (1:6) complete all as specified and directed. |
| 46 | Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces (external walls) in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified. Note : (i) WPC shall be measured and paid separately. |
| 47 | Material and labour for machine cut Kota stone slab 18-20 mm thick (of size not less than 55 cm x 55 cm in flooring laid and jointed with grey cement slurry mixed with pigment to match shade of the slab, over and including cement screed bed 20mm thick in cement mortar (1:6) base including rubbing and mirror polishing etc,complete all as specified and directed. |
| 48 | M&L for machine cut Kota stone slab 18-22 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and Mirror polishing with including half round edge moulding but as in vertical surfaces such as skirting and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, complete all as specified and directed. |
| 49 | Dismantling of asbestos cement sheet (corrugated, semicorrugated, etc, sheet in roof coverings etc all as specified and directed. |
| 50 | M&L for providing reinforced cement concrete 1:2:4 type B1 using (20mm graded stone aggregate ) as slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and finished even and fair without using extra cement including WPC as per manufacturers instructions the like all as specified and directed. |
| 51 | Providing formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick horizontal or sloping) with fair finished surfaces etc all as specified and directed. |
| 52 | M&L for mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 53 | M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate) as in padding on roof top including WPC as per manufacturers instructions to achieve the slop required, with minimum thickness of 25mm consolidated and finished even and fair without using extra cement. (WPC shall be measured and paid separately |
| 54 | M&L for 10 mm thick screed bed or bedding layer in CM (1:3) mixed with water proofing compound as per manufacturer instructions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. |
| 55 | M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non Approachable roofs- Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. |
| 56 | One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. |
| 57 | One layer of polymeric water proofing membrane 3mm thick of weight not less than 3.5 kg/Sqm consisting 90 micron thick of central core shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame. |
| 58 | One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over polymeric membrane. |
| 59 | Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm. |
| 60 | Supply only liquid water proofing compound, ISI marked complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender