Tender For Repair To Fencing, Compound Wall, Hard Standing, Drain & Other Allied Work In Otm Accn -Iv, V & Vi Of Age Br-Ii Under Ge (North) Ambala Cantt
Tender Value
46 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
20 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Fencing, Compound Wall, Hard Standing, Drain & Other Allied Work In Otm Accn -Iv, V & Vi Of Age Br-Ii Under Ge (North) Ambala Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises ,complete all as specified and as directed. |
| 2 | Material and labour for outdoor non skid heavy duty tiles of size exc 0.11 sqm but n.exc. 0.38 sqm, 10 to 12 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified & directed |
| 3 | Material and labour for 8 to 10mm thick heavy duty(digital) ,vitrified coloured paver tiles of size 300mm x 300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6) , complete all as specified and as directed.Make: Endura of Johnson or Durastone of Somany or equivalent make given in App ‘B’ |
| 4 | Dismantling of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar, etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and as directed. |
| 5 | Material and labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4), complete all as specified and as directed . |
| 6 | All as per serial No. 05 here in before but except bricks (the old serviceable bricks as obtained from serial item No 04 here in before shall be used the rates includes removing motar, cleaning the bricks with water, etc), complete, all as specified and as directed . |
| 7 | Material and labour for brick work with sub class -B bricks, in half brick thick walls, built in cement mortar 1:4 straight or curved on plan to any radius, complete all as specified and directed . |
| 8 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 9 | Material and labour for rendering 15 mm thick on any faces of brick work or concrete surfaces in cement mortar (1:4) and finished fair and smooth without using extra cement , complete all as specified and as directed. |
| 10 | Material and labour rough cast plaster 15 mm thick in cement motar (1:4) complete as specified in SSR Part–I, clause 14.22 shall consisting of following:– firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete all as specified and as directed . |
| 11 | Material and labour for preparation of new plastered/unplastered surfaces of walls, chajjas, roof projection, etc. and applying two coats of cement base paint over a coat of alkali resistant primer ,complete all as specified and as directed. |
| 12 | Material and labour for repairing of RCC projection, chajjas, facia, bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion of RCC at any height and in any sitution / floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of cement based paint to match with existing surfaces complete all as specified and as directed by the Engineer–in–Charge.Note:-Unit rate of this item includes the cost of scaffolding, formwork etc. and nothing extra shall be paid on account of variation in height. |
| 13 | Dismantling of wire mesh fencing of any type/size and in any position, neatly coiled and removing from site complete, all as specified and as directed . |
| 14 | Dismantling dilapated /decayed posts or struts (wood, steel or R.C.C.) of any section /height, including taking out embedded portion, embedded in concrete /brick work /masonry /natural ground and each n exc 0.5 cum in volume below GL, getting out and removing surplus soil to a distance n exc 50 m and making good ,complete all as specified and as directed . |
| 15 | Excavating in post holes (or similer holes) each n exc 0.5 cum, getting out,returning filling in and raming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm each layer , watering , ramming and removing surplus soil to a distance n exc 50m and making good surface complete, all as specified and directed. |
| 16 | Material and labour for PCC (1:3:6), Type C-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete, all as specified and as directed . |
| 17 | Supply and fixing mild steel work as in posts/poles or struts in fencing etc including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed . |
| 18 | Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long , diameter of the neck in 5 to 10 mm , complete all as specified and directed . |
| 19 | Material and labour for mild steel round bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Gd I, IS-432 Part I, complete all as specified and as directed. |
| 20 | Supply only chain link MS galvanised fencing including any size and type to any type of standards, complete, all as specified and as directed . Note :-Weight of chain link fencing shall be ascertained by BOO as ordered by GE. |
| 21 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete, all as specified and as directed. |
| 22 | Supply and fixing, as in repair, galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete, all as specified and as directed. |
| 23 | Prepation of new surfaces of steel any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 24 | Demolition of Stone slabs and tiles laid bedded on sand/cement pointed in mortar of any description or thickness in floors, aprons etc. complete all as specified and as directed . |
| 25 | Material and labour for 16 to 20mm thick Granite stone of black shade work (table rubbed, polished & moulding), as in floors, RCC/brick pillars or wall surfaces and like bedded with and including 10 mm thick rendering in CM (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointed with white with admixture of pigment to match with shade of granite stone including grinding, polishing, rounding and moulding of stone slabs on edges, including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified & directed. |
| 26 | Material and labour machine pressed rubber moulded precast coloured concrete interlocking paver block, any shape and size conforming to IS 15658–2006 of 80 mm thickness, grade M–40 with grey cement and pigments over and including a layer of sand cushioning, 25 mm thick, complete all as specified and as directed. |
| 27 | Material and labour machine pressed rubber moulded coloured precast concrete interlocking paver block, any shape and size conforming to IS 15658–2006 of 60 mm thickness, grade M–35 with grey cement and pigments over and including a layer of sand cushioning, 25 mm thick complete all as specified and as directed. |
| 28 | Supply and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage complete all as specified and as directed. |
| 29 | Material and labour for providing precast cement concrete louvres and jallies/Zafri jali 25mm thick (measured solid) type C0, 1:3:6 (using 12.5mm graded stone aggregate) set in cement mortar (1:4) including all mouldings as fixed complete all as specified and directed . |
| 30 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including removal the rubbish/ demolished material outside defence land, complete, all as specified and directed . |
| 31 | Material and labour for providing PCC (1:4:8) Type D2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed. |
| 32 | Material and labour for plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in surface channels and drains, complete all as specified and as directed . |
| 33 | Material and labour for plain cement concrete type B0, 1:2:4 (using 12.5mm graded stone aggregate), as roof kerbs, mud stop, coping etc including rounding and chamfered ,complete all as specified and as directed . |
| 34 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed . |
| 35 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having zinc coating 150 grams per Sqm (Az 150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall etc,fixed with self tapping screws ,complete all as specified and as directed. |
| 36 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa having zinc coating 150grams/Sqm (Az-150) as in roof ridge,valley gutter etc fixed with self tapping screws complete all as specified and as directed. |
| 37 | Material and labour glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/ skirtings /dados of size 300 x 450 x 7 to 8 mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 15mm thick rendering on fair faces of brick /concrete surfaces in cement mortar (1:6), complete, all as specified and as directed. |
| 38 | Note:- Amount of credit of Rs.50,765.00 for retrieved materials is mentioned in Schedule of Credit Page No.111 of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender