Tender For Special Repair For Centrifugal Pump Sets (Against Ber) At Sect C1 & C2 & Provn Of Chemical Dosing Sys For Syl Filtration Plant Under Ge (U) Ambala Cantt.
Tender Value
35.40 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
20 days left
EMD
70800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambala → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair For Centrifugal Pump Sets (Against Ber) At Sect C1 & C2 & Provn Of Chemical Dosing Sys For Syl Filtration Plant Under Ge (U) Ambala Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying installing, testing and commissioning centrifugal pump set with squirrel cage induction motor 25 HP, 1450 RPM, 415 V, 3 Phase, 50 Hz, TEFC, IP55 protection, Class 'F' insulation, coupled with horizantal split casing pump not less than 1500 LPM water discharge, 20 meter head, dynamically balanced impeller, stainless steel shaft, mechanical seal, antifriction bearings, flexible coupling with coupling guard, common MS fabricated base frame, foundation bolts, anti-vibration pads, all accessories, internal wiring between motor and starter, painting, alignment, trial run and performance testing, suitable for delivering the specified discharge against the required total head complete all as specified and directed. |
| 2 | Supplying installing, testing and commissioning centrifugal pump set with squirrel cage induction motor 10 HP, 1450 RPM, 415 V, 3 Phase, 50 Hz, TEFC, IP55 protection, Class 'F' insulation, coupled with horizantal split casing pump not less than 600 LPM water discharge, 20 meter head, dynamically balanced impeller, stainless steel shaft, mechanical seal, antifriction bearings, flexible coupling with coupling guard, common MS fabricated base frame, foundation bolts, anti-vibration pads, all accessories, internal wiring between motor and starter, painting, alignment, trial run and performance testing, suitable for delivering the specified discharge against the required total head complete all as specified and directed. |
| 3 | Supplying installing, testing and commissioning centrifugal pump set with squirrel cage induction motor 120 HP, 1450 RPM, 415 V, 3 Phase, 50 Hz, TEFC, IP55 protection, Class 'F' insulation, coupled with horizantal split casing pump not less than 50000 GPH water discharge, 80 meter head, TEFC, IP55 protection, Class 'F' insulation, complete with cast iron pump casing, dynamically balanced impeller, stainless steel shaft, mechanical seal, antifriction bearings, flexible coupling with coupling guard, common MS fabricated base frame, foundation bolts, anti-vibration pads, all accessories, internal wiring between motor and starter, painting, alignment, trial run and performance testing, suitable for delivering the specified discharge against the required total head complete all as specified and directed. |
| 4 | Supplying installing, testing and commissioning submersible bore well pump set suitable for installation in 300 mm dia bore well casing pipe, capacity of 50 HP, not less than 8 stage, discharge 1500 LPM, head 90 meter, directly coupled with 50 HP, 415 Volts, 3 Phase, 50 Hz, squirrel cage induction submersible motor, water-filled/water-lubricated, suitable for continuous duty, complete with multistage centrifugal pump, stainless steel shaft, SS impellers, lowering into bore well, alignment, connection to delivery main, testing, trial run and commissioning complete all as specified and directed. |
| 5 | Supplying installing, testing and commissioning submersible bore well pump set suitable for installation in 300 mm dia casing pipe, having a hydraulic capacity of 62 HP, not less than 8 stage, head 90 mtr , discharge 2000 LPM directly coupled with a 62 HP, 415 Volts, 3 Phase, 50 Hz, squirrel cage induction submersible motor, water-filled/water-lubricated, suitable for continuous duty, complete with stainless steel shaft, stainless steel impellers and diffusers, heavy-duty thrust bearing complete all as specified and directed. |
| 6 | Supplying installing, testing and commissioning non-clogging dewatering pump set of 3.5 HP capacity, capable of delivering the specified discharge against a total head of 18 metres, vertical submersible centrifugal type with non-clog impeller suitable for handling dirty water, sewage, silt-laden water and suspended solids, directly coupled with 415 Volts, 3 Phase, 50 Hz, squirrel cage induction submersible motor, TEFC/IP68, Class 'F' insulation, suitable for continuous duty, complete with cast iron pump casing, abrasion-resistant impeller, stainless steel shaft, double mechanical seal in oil chamber, heavy-duty bearings, discharge connection complete all as specified and directed. |
| 7 | Note:- Ser item no- 1.00 to 6.00 is against BER items and material taken out will be deposited in MES store Please Enable Macros to View BoQ information |
| 8 | Note:- Ser item no- 1.00 to 6.00 is against BER items and material taken out will be deposited in MES store Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender