Tender For Providing Galvalume Sheet Roofing Over The Roof Of 33Kva Muss Inside Wharf Area
Tender Value
18.51 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
20 days left
EMD
43700
Bank guarantee accepted
Document Fee
560
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dakshina Kannada → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Galvalume Sheet Roofing Over The Roof Of 33Kva Muss Inside Wharf Area
BOQ
| Sl. No. | Item Description |
| 1 | Description |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge. |
| 3 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications including providing & removing formwork, centering & scaffolding (The cost of steel reinforcement to be paid separately) Mix 1:2:4 (M15) using 20 mm nominal size graded crushed coarse aggregates- for plinth beam and Colunm above plinth beam |
| 4 | Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications including providing & removing formwork, centering & scaffolding (The cost of steel reinforcement to be paid separately) Mix 1:2:4 (M15) using 20 mm nominal size graded crushed coarse aggregates concrete for Slab |
| 5 | Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification |
| 6 | Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. |
| 7 | Providing and fixing 80mm G.I. B class pipe of approved make and quality, inlcuding cost of materials, labour charges, welding, painting fixing transpotation charges and all other incidental charges etc. complete |
| 8 | Providing and fixing 65mm G.I. B class pipe of approved make and quality, inlcuding cost of materials, labour charges, welding, painting fixing transpotation charges and all other incidental charges etc. complete |
| 9 | Providing and fixing 50mm G.I. B class pipe of approved make and quality, inlcuding cost of materials, labour charges, welding, painting fixing transpotation charges and all other incidental charges etc. complete |
| 10 | Providing & Fixing 0.50mm thick colour coated Galvalume sheets for roofing with galvanized iron J/L hooks & bolts 8mm dia of required size/ self tapping screws with washer. The sheets are of hot dip coated with an Aluminium Zinc Silicon alloy coating with 55% Alu, 43.5% Zinc & 1.5% Silicon. The cost includes cost of sheets, transportation & fixing in position with GI bolts 8mm with CI plain and bitumen/ rubber washer with plastic cap at top etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender