Tender For Renovation Of Hall Work Near Mahajan Sabha Ward No 20 Gandhi Nagar Ac Bahu . Amount : Rs 14.00 Lacs
Tender Value
14 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
5 days left
EMD
28000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Hall Work Near Mahajan Sabha Ward No 20 Gandhi Nagar Ac Bahu . Amount : Rs 14.00 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:3:6 or richer mix (I/c equivalent design mix |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kind of Soil |
| 3 | Removal of Excavated mulba dismantled unserviceable material from the site of work by mechanical transport or manual means or animal means including loading and unloading complete job . |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with : 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 7 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 10 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 11 | 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) |
| 12 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) Neat cement punning |
| 13 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick. |
| 14 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 15 | Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats |
| 16 | Supplying and filling in plinth with fine sand under floors including, watering,ramming, consolidating and dressing complete |
| 17 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown and wooden shade as per direction of engineer in charge at site. |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 21 | Providing and Fixing of Aluminium Doors / Vents as per directions of engineer in charge. |
| 22 | Providing and fixing of Stainless steel benches as per direction engineer-in charge at site. |
| 23 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:15 mm dia. nominal bore |
| 24 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:20mm dia. nominal bore |
| 25 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm |
| 26 | P/F UPVC pipes complete with all fittings excluding trenching & refilling etc internal Work 110 mm dia. |
| 27 | Providing and fixing upvc bend 110mm dia |
| 28 | Providing and fixing upvc bend 75 mm dia |
| 29 | Providing and fixing upvc Tee 110mm dia |
| 30 | Providing and fixing upvc flow trap 110mm dia |
| 31 | Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore 125 mm long foam flow ,weighing long body |
| 32 | Providing and fixing 15 mm nominal bore C.P. brass bib cock small body |
| 33 | P/F of C.P Grating with hole |
| 34 | P/F of C.P Grating without hole |
| 35 | P/F of 600 x 450 mm beveled edge mirror of superior glass complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. |
| 36 | P/F of Towel Rod with all fittings complete. |
| 37 | P/F of Soap Case with all fittings complete. |
| 38 | P/F of 0.5 H.P electric mortar for lifting of water to over head tank |
| 39 | P/F in position PVC water tank with lockable cover of approved brand incl. inlet/outet and overflow connection complete. (Including placing on terrace) |
| 40 | Providing and fixing white vitreous china pedestal type water closet (European-type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled 39 device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting land making good the walls and floors wherever required: 18.2.1 W.C. pan with ISI marked white solid plastic seat and lid. |
| 41 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard 40 flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of /18.4.1 One urinal basin with 5 literwhite P.V.C automatic flushing cistern. require |
| 42 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls 41 wherever required:18.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 43 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fiftings. |
| 44 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: |
| 45 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete |
| 46 | Providing and fixing 15 mm nominal bore C.P. brass angle valve |
| 47 | Providing and fixing pvc connection as per dirctions of engineer in charge |
| 48 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia,steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, |
| 49 | Lump sum of soak pit as per dirctions of engineer in charge |
| 50 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth. White Agaria Marble Stone |
| 51 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required including cutting the wall and making the good same in case of recessed conduit as per site requirement. |
| 52 | Supplying and fixing C.I. cover without frame for manholes: 500 mm diameter C.I. cover (medium duty) the weight of thecover to be not less than 58 kg |
| 53 | Providing and fixing of inauguration granite Stone of size 2’-6 x 3’-6” including engraved letters and pedestrial of Standard height complete job as per directions engineer-in charge at site. |
| 54 | Carriage of materials by all means including loading/ unloading and stacking complete. Sand |
| 55 | Carriage of materials by all means including loading/ unloading and stacking complete Stone aggregate below 40mm Nominal size . |
| 56 | Carriage of materials by all means including loading/ unloading & stacking complete. Bricks. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender