Petroleum and Natural Gas Boards / Undertakings / PSU Closing in 16 days TDR #58244255

Bids Are invited for Custom Bid For Services - Interior Renovation Of Hngpl Proposed Office Space At Khasra No 2483 M Arya Nagar Chowk Jwalapur Near Soni Nursing Home Haridwar Uk - Plain Cement Concrete (Pcc)-: Providing, Laying , Consolidating And C

Issued by Boards / Undertakings / PSU · Haridwar, Uttarakhand
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2026
16 days left
EMD
3.05 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
1

Project Description

Bids Are invited for Custom Bid For Services - Interior Renovation Of Hngpl Proposed Office Space At Khasra No 2483 M Arya Nagar Chowk Jwalapur Near Soni Nursing Home Haridwar Uk - Plain Cement Concrete (Pcc)-: Providing, Laying , Consolidating And Curing Plain Cement Concrete (P.C.C.) As Required Including The Cost Of Centering And Shuttering Etc, Provision Of Glass Strips For Expansion Joints, Etc. If Required As Directed, With Ordinary Portland Cement (Opc) Of Approved Make Including As Specified. P.C.C. 1:2:4 Mix (1 Cement: 2 Coarse Sand:4 Graded Stone Agregates Of 20 Mm Nominal Size) , Providing, Laying , Consolidating And Curing Plain Cement Concrete (P.C.C.) As Required Including The Cost Of Centering And Shuttering Etc. As Directed, With Ordinary Portland Cement (Opc) Of Approved Make Including As Specified. P.C.C. 1:3:6 Mix (1 Cement: 3 Coarse Sand: 6 Graded Stone Agregates 20 Mm Nominal Size) , Providing Dry Trap / Granite / Quartzite Rubble Stone Soling In Layers Of 15 To 20Cm.Thick Including Hand Packing And Consolidation With Mechanical Rammer Etc. , Providing And Placing Steel Reinforcement In Position For Rcc Works Including Strainghtening, Cutting, Bending, Placing In Position And Binding All Complete Including Cleaning And Making It Free From Oil, Grease Etc. Complete. Cold Twisted Bars (Tor Steel) - Fe 500 , Construction Of 6 Thk Brcikwall:Providing And Laying Autoclaved Aerated Cement Blocks Masonry With > 200 Mm Thick Aac Blocks In Super Structure Above Plinth Level Up To Floor V Level In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand ) Complete In All Respects Complying With Relevant Standard Specifications And As Directed By The Bpcl , Construction Of 9 Thk Brcikwall: Providing And Laying Autoclaved Aerated Cement Blocks Masonry With < 200 Mm Thick Aac Blocks In Super Structure Above Plinth Level Up To Floor V Level In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand ) Complete In All Respects Complying With Relevant Standard Specifications And As Directed By The Bpcl.The Rate To Include Cost Of Providing, Laying In Position The Rcc Stiffener With 2 Nos 6 Mm Dia M.S. Bars At Every Third Course Of Masonry Work. Wherever Necessary Proper Setting Curing Etc., Complete In All Respects Complying With Relevant Standard Specifications And As Directed By The Bpcl. , M.S Framing Work : Providing, Fabricating, Erecting And Fixing In Position Structral Members Made Out Of Ms Square Bars, Ms Flats, Structural Steel Sections With All Joints Welded Bolted Screwed And Grinding As Required Fixed By Lugs And Welding With Inserts In Rcc Masonary Works Complete As Per Approved Design Including A Coat Of Red Oxide Primer And Two Coats Of Synthic Enamel Paint Of Approved Shade Etc.Complete. , Cement Plaster – Internal : Providing And Applying 12-15 Mm (Avg) Thick Cement Plaster In Cement Mortar 1:4 With/ Without Neeru Finished Smooth Wherever Instructed By The Architect For All Plain / Curved Surfaces Of Brick / Block / Rcc Walls And Finishing The Same (Smooth Or Broom) In Correct Line, Level & Plumb, Making Of Edges, Corners, Sill, Jambs, Soffits, Grooves, Pattas Etc. As Per Drawings & Relevant Specifications Including All Necessary Surface Preparation, Scaffolding Etc. Complete. The Rate Shall Be Inclusive Of Providing And Fixing Of Pvc Chicken Mesh Of Approved Quality At All Junctions Of Rcc & Masonry Work, Hacking Of Concrete Surface To Receive Plaster, Watering, Curing, Cleaning Etc. Complete At All Levels And Heights Etc. Complete In All Respects Including Scaffolding, Bonding Agent, Curing And As Directed By The Architect. , Wall Dado (In Kitchen Rooms) :Providing, Laying And Fixing The Following Tiles Of Approved Quality, Shade And Make, Filling Joints With Cement Admixed With Matching Pigments And Cleaning Etc.Complete As Directed In The Required Pattern On Existing Flooring Or Walls Or Skirting With Suitable Adhesive Including Surface Prepration I.E., Cleaning, Chipping, Hacking Etc., As Required. Vitrified Tiles Of Upto Size 60X60cm , Providing Half Round Edge Moulding To 18 Mm Thick Granite Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc.Complete As Per Design Approved By Engineer-In-Charge. , Providing Full Round Edge Moulding To 18 Mm Thick Granite Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc.Complete As Per Design Approved By Engineer-In-Charge. , Providing Champher Edge Moulding To 18 Mm Thick Granite Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc.Complete As Per Design Approved By Engineer-In-Charge. , Double Patti Granite Frame :Providing And Erecting Door Frame Window Cills In Step Pattern In Jet Black Granite Of 17 To 19Mm Thick On Inside And Outside In Required Sizes As Per The Site. Cills To Be Fixed In Perfect Line, Level And Plumb On Required Thickness Of Cement Bedding In Cm 1:3. Granite Cill To Have Full Round Polishing As Required Moulded Nosing On The Entire Running Length Only On Internal Side And The Moulding Shall Be Machine Polished. (Basic Rate Of Granite Rs 185- Per Sqft. Step Shall Not Be Measured For Payment Purpose.) , Kitchen Platform: Providing And Fixing Kitchen Platform With Required Cutouts For Sink. The Counter Top, Shelves, Vertical Partitions Etc. To Have 40Mm Thick Cuddappah Undercarriage Supported On Brackets And Top Finished In 17 To 19Mm Thick Telephonic Black Granite. The Facia To Be Of Black Granite 75Mm Wide Along The Length Of The Counter With Full Round Moulding Polished Etc. The Cost To Include Full Round Moulding Along The Perimeter Of The Sink Cutout (Polished), Making Holes For Gas Pipes In The Wall Counter Top, Fixing The Stainless Steel Sink But Excluding The Cost Of Sink And Cp Brass Fittings. The Exposed Vertical Side Of L-Shape Shall Be Cladded With 17 To 19Mm Thick Telephonic Black Granite Slab (With 3 Inch Extended Heigth Above The Kitchen Platform) With Full Round Edge Moulding And Polishing Etc. The Basic Cost Of Granite Rs. 185- Per Sqft. The Item Shall Include Providing And Fixing Angular Shape Pvc Pipe Of Required Dia. And Length For Hosing Lpg Gas Pipe. (Only Plan Area Will Be Measured For The Purpose Of Payment.) , Providing, Laying, Fixing (With Adhesive Solution As Per Manufacturers Specifications) And Testing In Position Cpvc Pipes With All Fitting Like Coupling, Transition Coupling, Reducer Coupling, Brass Coupling, Tee, Reducer Tee, Brass Fpt Tee, Elbow, Reducer Elbow, Brass Fpt Elbow, Male And Female Adapter (Cpvc And Brass Threads), Cap, Union, Cross, Step Over Bend Etc. Of Astral Or Approved Equivalent Make Including Concealing The Pipes In Walls Or Under Floors, Including Making Chases In The Walls, Fixing In The Wall With M.S Clamps Etc. Complete Hydraulic Testing After Laying The Pipes As Specified Including Making Holes In Walls Or Floors As Required And Making Good The Same With Brass Fitting Of Seamless Half Hard Temper, With Cylindrical And Smooth Inner And Outer Surface, And Free From Air Holes Cracks And Other Defects. All Cpvc Pipes And Fittings Should Be Properly Cleaned Before Joining. All The Joints Shall Be Perfectly Air And Water Tight. If Require All Pipework Shall Be Supported With Pvc G.I Clips. And Complete As Per Manufactures Instruction. All The Above Work Shall Be Carried Out Strictly As Per The Manufactures Specifications And Instructions - 20 Mm Dia Nominal Bore , Providing, Laying, Fixing (With Adhesive Solution As Per Manufacturers Specifications) And Testing In Position Cpvc Pipes With All Fitting Like Coupling, Transition Coupling, Reducer Coupling, Brass Coupling, Tee, Reducer Tee, Brass Fpt Tee, Elbow, Reducer Elbow, Brass Fpt Elbow, Male And Female Adapter (Cpvc And Brass Threads), Cap, Union, Cross, Step Over Bend Etc. Of Astral Or Approved Equivalent Make Including Concealing The Pipes In Walls Or Under Floors, Including Making Chases In The Walls, Fixing In The Wall With M.S Clamps Etc. Complete Hydraulic Testing After Laying The Pipes As Specified Including Making Holes In Walls Or Floors As Required And Making Good The Same With Brass Fitting Of Seamless Half Hard Temper, With Cylindrical And Smooth Inner And Outer Surface, And Free From Air Holes Cracks And Other Defects. All Cpvc Pipes And Fittings Should Be Properly Cleaned Before Joining. All The Joints Shall Be Perfectly Air And Water Tight. If Require All Pipework Shall Be Supported With Pvc G.I Clips. And Complete As Per Manufactures Instruction. All The Above Work Shall Be Carried Out Strictly As Per The Manufactures Specifications And Instructions - 25 Mm Dia Nominal Bore , Providing, Laying, Fixing (With Adhesive Solution As Per Manufacturers Specifications) And Testing In Position Cpvc Pipes With All Fitting Like Coupling, Transition Coupling, Reducer Coupling, Brass Coupling, Tee, Reducer Tee, Brass Fpt Tee, Elbow, Reducer Elbow, Brass Fpt Elbow, Male And Female Adapter (Cpvc And Brass Threads), Cap, Union, Cross, Step Over Bend Etc. Of Astral Or Approved Equivalent Make Including Concealing The Pipes In Walls Or Under Floors, Including Making Chases In The Walls, Fixing In The Wall With M.S Clamps Etc. Complete Hydraulic Testing After Laying The Pipes As Specified Including Making Holes In Walls Or Floors As Required And Making Good The Same With Brass Fitting Of Seamless Half Hard Temper, With Cylindrical And Smooth Inner And Outer Surface, And Free From Air Holes Cracks And Other Defects. All Cpvc Pipes And Fittings Should Be Properly Cleaned Before Joining. All The Joints Shall Be Perfectly Air And Water Tight. If Require All Pipework Shall Be Supported With Pvc G.I Clips. And Complete As Per Manufactures Instruction. All The Above Work Shall Be Carried Out Strictly As Per The Manufactures Specifications And Instructions - 40Mm Dia Nominal Bore , Providing And Fixing Pvc Pipes Conforming To Relevant Is Code Type A Including Jointing With Seal Ring And All Necessary Fittings Conforming To Is:5382 Leaving 10Mm Gap For Thermal Expansion: 100Mm Dia N.B , Providing And Fixing Pvc Pipes Conforming To Relevant Is Code Type A Including Jointing With Seal Ring And All Necessary Fittings Conforming To Is:5382 Leaving 10Mm Gap For Thermal Expansion: 150Mm Dia N.B , Providing And Fixing Stainless Steel Jali (Grating) With Or Without Hole For Waste Pipe For Floor Nahani Trap - 100 To 125 Mm Dia Weight Not Less Than 100 Gms. Cockroach Proof , Supply, Installation, Testing & Commissioning Of White Vitreous China Wall Mounting Ewc Including Of Approved Make, P Trap, Seat Cover, Cistern Fittings, Nuts, Bolts, Rubber Gasket, Wall Cutting As Required Etc., Complete. Appproved Make Jaquar (Kubix ) Or Grohe Or Kohler Or Approved Equivalent , Supply, Installation, Testing & Commissioning Of Conceled Cisten Along With Face Plate Of Appproved Make Jaquar (Kubix ) Or Grohe Or Kohler Or Approved Equivalent , Providing And Fixing Health Faucet (Jet Spray) With 1M Long Flexible Pipe With Wall Hook Appproved Make Jaquar (Kubix) Or Grohe Or Kohler Or Approved Equivalent , Providing And Fixing Cp Brass Angular 2 Way Bib Cock , Job Icludes Dismantling Of Existing One And Removing It From Our Premises . Material Shall Be Of Approved Make Jaquar(Kubix)/Grohe/Kohlar Or Approved Make , Providing And Fixing Stainless Steel Kitchen Sink (1Mm Thick) As Per Is 13983 With Ci Brackets And Stainless Steel Plug 40 Mm Including Painting Of Fitting And Brackets, Cutting And Making Good The Walls Wherever Required: Without Drain Board 535 X 460 Bowl Depth 178 Mm. , Providing And Fixing Cp Brass Angle Cock Of Approved Quality Conforming To Is: 8931Of Appproved Make Jaquar (Kubix) Or Grohe Or Kohler Or Approved Equivalent , Providing And Fixing White Vitreous Half Stall Sensor Based Urinal With Fittings Ci Ms Brackets Standard Size Cp Brass Flush Pipe, Spreaders With Unions And Clamps (All In Cp Brass) With Waste Fitting As Per Is : 2556, Ci Trap With Outlet Grating And Other Couplings In Cp Brass Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required. Single Half Stall Sensor Based Urinal As Per Relevant Is Code. , Providing And Fixing Cp Brass Stop Cock (Concealed) Along With Face, Of Standard Design And Of Approved Make Conforming To Is: 8931 , Providing And Fixing 32 Mm Dia Cp Brass Bottle Trap With Necessary Fittings Like Wall Connection Pipe Of Required Length, Wall Flange, Trap Pipe Upto 300 Mm Etc Complete. , Supply And Fixing Toilet Paper Holder With Flap Recessed Type (Stainless Steel) , Supplying And Fixing Stainless Steel Auto Soap Dispenser Of Approved Make Of Capacity 0.8L Of Approved Make Jaquar (Model-Sdr-Blc-Dj0160as )/ Kohler / Grohe Or Approved Equivalent. , Hand Dryer Supply Of Slim Stainless Steel Finished Automatic Hand Dryers, Solid State, No Touch Operting, Fully Hygienic Hand Drier Of Approved Shade With Blower, Continuous Repeat Usage, Time Delay, Summer And Winter Control, Music While Drying, Volume On/Off Controls Including Providing Necessary Bracket, Cable From Drier To Plug, Plug Top Key And Lock Etc. Complete As Required.Single Blower Of Makes And Quality As Approved By Architect And Engineer - In - Charge. Optima Of Jaquar/Equivalent , Automatic Shoe Polishing Machine Having 200 Ml Dispenser Capacity And 2 Brushes Of Approved Make Novatech (Ntsm3) Or Eye Vision Or Uniair Or Approved Equivalent. , Paper Towel Dispensor Of Multifold Type Paper Of Approved Make Euronics (Ep23) Or Jaquar Or Kimberly Clark Or Approved Equivalent , Demolition Wall Or Cutting With Wall Cutter For Window/Ventilaor Cut Out - Dismantling Brick Masonry Or Reinforced Brick Masonry Along With Plaster In Cement Mortar And Including Stacking Of Serviceable Materials And Disposal Of Unserviceable Materials Outside Our Premises To Approved Dumping Grounds Of Local Municipal Authorities. In Existing Wall For Creation Of Window/Ventilator Etc, As Per Engg I/C

BOQ

Sl. No. Item TitleItem Description
1PLAIN CEMENT CONCRETE (PCC)-: Providing, laying , consolidating and curing plain cement concrete (P.C.C.) as required including the cost of centering and shuttering etc, provision of glass strips for expansion joints, etc. if required as directed, with ordinary Portland cement (OPC) of approved make including as specified. P.C.C. 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone agregates of 20 mm nominal size)PLAIN CEMENT CONCRETE (PCC)-: Providing, laying , consolidating and curing plain cement concrete (P.C.C.) as required including the cost of centering and shuttering etc, provision of glass strips for expansion joints, etc. if required as directed, with ordinary Portland cement (OPC) of approved make including as specified. P.C.C. 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone agregates of 20 mm nominal size)
2Providing, laying , consolidating and curing plain cement concrete (P.C.C.) as required including the cost of centering and shuttering etc. as directed, with ordinary Portland cement (OPC) of approved make including as specified. P.C.C. 1:3:6 mix (1 cement: 3 coarse sand: 6 graded stone agregates 20 mm nominal size)Providing, laying , consolidating and curing plain cement concrete (P.C.C.) as required including the cost of centering and shuttering etc. as directed, with ordinary Portland cement (OPC) of approved make including as specified. P.C.C. 1:3:6 mix (1 cement: 3 coarse sand: 6 graded stone agregates 20 mm nominal size)
3Providing dry trap / granite / quartzite rubble stone soling in layers of 15 to 20cm.thick including hand packing and consolidation with mechanical rammer etc.Providing dry trap / granite / quartzite rubble stone soling in layers of 15 to 20cm.thick including hand packing and consolidation with mechanical rammer etc.
4Providing and placing steel reinforcement in position for RCC works including strainghtening, cutting, bending, placing in position and binding all complete including cleaning and making it free from oil, grease etc. complete. Cold twisted bars (TOR Steel) - FE 500Providing and placing steel reinforcement in position for RCC works including strainghtening, cutting, bending, placing in position and binding all complete including cleaning and making it free from oil, grease etc. complete. Cold twisted bars (TOR Steel) - FE 500
5CONSTRUCTION OF 6\\" THK BRCIKWALL:Providing and laying autoclaved aerated cement blocks masonry with > 200 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ) complete in all respects complying with relevant standard specifications and as directed by the BPCLCONSTRUCTION OF 6\\" THK BRCIKWALL:Providing and laying autoclaved aerated cement blocks masonry with > 200 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ) complete in all respects complying with relevant standard specifications and as directed by the BPCL
6CONSTRUCTION OF 9\\" THK BRCIKWALL: Providing and laying autoclaved aerated cement blocks masonry with < 200 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ) complete in all respects complying with relevant standard specifications and as directed by the BPCL.The rate to include cost of Providing, laying in position the RCC Stiffener with 2 Nos 6 mm dia M.S. bars at every third course of masonry work. wherever necessary proper setting curing etc., complete in all respects complying with relevant standard specifications and as directed by the BPCL.CONSTRUCTION OF 9\\" THK BRCIKWALL: Providing and laying autoclaved aerated cement blocks masonry with < 200 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ) complete in all respects complying with relevant standard specifications and as directed by the BPCL.The rate to include cost of Providing, laying in position the RCC Stiffener with 2 Nos 6 mm dia M.S. bars at every third course of masonry work. wherever necessary proper setting curing etc., complete in all respects complying with relevant standard specifications and as directed by the BPCL.
7M.S FRAMING WORK : Providing, fabricating, erecting and fixing in position structral members made out of MS square bars, MS flats, structural steel sections with all joints welded bolted screwed and grinding as required fixed by lugs and welding with inserts in RCC Masonary works complete as per approved design including a coat of red oxide primer and two coats of synthic enamel paint of approved shade etc.complete.M.S FRAMING WORK : Providing, fabricating, erecting and fixing in position structral members made out of MS square bars, MS flats, structural steel sections with all joints welded bolted screwed and grinding as required fixed by lugs and welding with inserts in RCC Masonary works complete as per approved design including a coat of red oxide primer and two coats of synthic enamel paint of approved shade etc.complete.
8CEMENT PLASTER – INTERNAL : Providing and applying 12-15 mm (avg) thick cement plaster in cement mortar 1:4 with/ without neeru finished smooth wherever instructed by the Architect for all plain / curved surfaces of brick / block / RCC walls and finishing the same (smooth or broom) in correct line, level & plumb, making of edges, corners, sill, jambs, soffits, grooves, pattas etc. as per drawings & relevant specifications including all necessary surface preparation, scaffolding etc. complete. The rate shall be inclusive of providing and fixing of PVC chicken mesh of approved quality at all junctions of RCC & masonry work, hacking of concrete surface to receive plaster, watering, curing, cleaning etc. complete at all levels and heights etc. complete in all respects including scaffolding, bonding agent, curing and as directed by the Architect.CEMENT PLASTER – INTERNAL : Providing and applying 12-15 mm (avg) thick cement plaster in cement mortar 1:4 with/ without neeru finished smooth wherever instructed by the Architect for all plain / curved surfaces of brick / block / RCC walls and finishing the same (smooth or broom) in correct line, level & plumb, making of edges, corners, sill, jambs, soffits, grooves, pattas etc. as per drawings & relevant specifications including all necessary surface preparation, scaffolding etc. complete. The rate shall be inclusive of providing and fixing of PVC chicken mesh of approved quality at all junctions of RCC & masonry work, hacking of concrete surface to receive plaster, watering, curing, cleaning etc. complete at all levels and heights etc. complete in all respects including scaffolding, bonding agent, curing and as directed by the Architect.
9WALL DADO (IN KITCHEN ROOMS) :Providing, laying and fixing the following tiles of approved quality, Shade and make, filling joints with cement admixed with matching pigments and cleaning etc.complete as directed in the required pattern on existing flooring or walls or skirting with suitable adhesive including surface prepration i.e., cleaning, chipping, hacking etc., as required. Vitrified tiles of upto size 60x60cmWALL DADO (IN KITCHEN ROOMS) :Providing, laying and fixing the following tiles of approved quality, Shade and make, filling joints with cement admixed with matching pigments and cleaning etc.complete as directed in the required pattern on existing flooring or walls or skirting with suitable adhesive including surface prepration i.e., cleaning, chipping, hacking etc., as required. Vitrified tiles of upto size 60x60cm
10Providing Half round edge moulding to 18 mm thick Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.Providing Half round edge moulding to 18 mm thick Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.
11Providing Full round edge moulding to 18 mm thick Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.Providing Full round edge moulding to 18 mm thick Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.
12Providing Champher edge moulding to 18 mm thick Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.Providing Champher edge moulding to 18 mm thick Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-Charge.
13DOUBLE PATTI GRANITE FRAME :Providing and erecting door frame window cills in step pattern in Jet black granite of 17 to 19mm thick on inside and outside in required sizes as per the site. Cills to be fixed in perfect line, level and plumb on required thickness of cement bedding in CM 1:3. Granite cill to have full round polishing as required moulded nosing on the entire running length only on internal side and the moulding shall be machine polished. (Basic Rate of Granite Rs 185- Per Sqft. Step shall not be measured for payment purpose.)DOUBLE PATTI GRANITE FRAME :Providing and erecting door frame window cills in step pattern in Jet black granite of 17 to 19mm thick on inside and outside in required sizes as per the site. Cills to be fixed in perfect line, level and plumb on required thickness of cement bedding in CM 1:3. Granite cill to have full round polishing as required moulded nosing on the entire running length only on internal side and the moulding shall be machine polished. (Basic Rate of Granite Rs 185- Per Sqft. Step shall not be measured for payment purpose.)
14KITCHEN PLATFORM: Providing and fixing Kitchen Platform with required cutouts for sink. The counter top, shelves, vertical partitions etc. to have 40mm thick cuddappah undercarriage supported on brackets and top finished in 17 to 19mm thick telephonic black granite. The facia to be of black granite 75mm wide along the length of the counter with full round moulding polished etc. The cost to include full round moulding along the perimeter of the sink cutout (polished), making holes for gas pipes in the wall counter top, fixing the stainless steel sink but excluding the cost of sink and CP brass fittings. The exposed vertical side of L-shape shall be cladded with 17 to 19mm thick Telephonic black granite slab (with 3 inch extended heigth above the kitchen platform) with full round edge moulding and polishing etc. The basic cost of granite Rs. 185- per sqft. The item shall include providing and fixing Angular shape PVC pipe of required dia. and length for hosing LPG Gas pipe. (Only plan area will be measured for the purpose of payment.)KITCHEN PLATFORM: Providing and fixing Kitchen Platform with required cutouts for sink. The counter top, shelves, vertical partitions etc. to have 40mm thick cuddappah undercarriage supported on brackets and top finished in 17 to 19mm thick telephonic black granite. The facia to be of black granite 75mm wide along the length of the counter with full round moulding polished etc. The cost to include full round moulding along the perimeter of the sink cutout (polished), making holes for gas pipes in the wall counter top, fixing the stainless steel sink but excluding the cost of sink and CP brass fittings. The exposed vertical side of L-shape shall be cladded with 17 to 19mm thick Telephonic black granite slab (with 3 inch extended heigth above the kitchen platform) with full round edge moulding and polishing etc. The basic cost of granite Rs. 185- per sqft. The item shall include providing and fixing Angular shape PVC pipe of required dia. and length for hosing LPG Gas pipe. (Only plan area will be measured for the purpose of payment.)
15Providing, laying, fixing (with adhesive solution as per manufacturers specifications) and testing in position CPVC pipes with all fitting like coupling, transition coupling, reducer coupling, brass coupling, tee, reducer tee, brass FPT tee, elbow, reducer elbow, brass FPT elbow, male and female adapter (CPVC and Brass threads), cap, union, cross, step over bend etc. of Astral or approved equivalent make including concealing the pipes in walls or under floors, including making chases in the walls, fixing in the wall with M.S clamps etc. complete hydraulic testing after laying the pipes as specified including making holes in walls or floors as required and making good the same with brass fitting of seamless half hard temper, with cylindrical and smooth inner and outer surface, and free from air holes cracks and other defects. All CPVC Pipes and fittings should be properly cleaned before joining. All the joints shall be perfectly air and water tight. If require all pipework shall be supported with PVC G.I clips. and complete as per manufactures instruction. All the above work shall be carried out strictly as per the manufactures specifications and instructions - 20 mm dia nominal boreProviding, laying, fixing (with adhesive solution as per manufacturers specifications) and testing in position CPVC pipes with all fitting like coupling, transition coupling, reducer coupling, brass coupling, tee, reducer tee, brass FPT tee, elbow, reducer elbow, brass FPT elbow, male and female adapter (CPVC and Brass threads), cap, union, cross, step over bend etc. of Astral or approved equivalent make including concealing the pipes in walls or under floors, including making chases in the walls, fixing in the wall with M.S clamps etc. complete hydraulic testing after laying the pipes as specified including making holes in walls or floors as required and making good the same with brass fitting of seamless half hard temper, with cylindrical and smooth inner and outer surface, and free from air holes cracks and other defects. All CPVC Pipes and fittings should be properly cleaned before joining. All the joints shall be perfectly air and water tight. If require all pipework shall be supported with PVC G.I clips. and complete as per manufactures instruction. All the above work shall be carried out strictly as per the manufactures specifications and instructions - 20 mm dia nominal bore
16Providing, laying, fixing (with adhesive solution as per manufacturers specifications) and testing in position CPVC pipes with all fitting like coupling, transition coupling, reducer coupling, brass coupling, tee, reducer tee, brass FPT tee, elbow, reducer elbow, brass FPT elbow, male and female adapter (CPVC and Brass threads), cap, union, cross, step over bend etc. of Astral or approved equivalent make including concealing the pipes in walls or under floors, including making chases in the walls, fixing in the wall with M.S clamps etc. complete hydraulic testing after laying the pipes as specified including making holes in walls or floors as required and making good the same with brass fitting of seamless half hard temper, with cylindrical and smooth inner and outer surface, and free from air holes cracks and other defects. All CPVC Pipes and fittings should be properly cleaned before joining. All the joints shall be perfectly air and water tight. If require all pipework shall be supported with PVC G.I clips. and complete as per manufactures instruction. All the above work shall be carried out strictly as per the manufactures specifications and instructions - 25 mm dia nominal boreProviding, laying, fixing (with adhesive solution as per manufacturers specifications) and testing in position CPVC pipes with all fitting like coupling, transition coupling, reducer coupling, brass coupling, tee, reducer tee, brass FPT tee, elbow, reducer elbow, brass FPT elbow, male and female adapter (CPVC and Brass threads), cap, union, cross, step over bend etc. of Astral or approved equivalent make including concealing the pipes in walls or under floors, including making chases in the walls, fixing in the wall with M.S clamps etc. complete hydraulic testing after laying the pipes as specified including making holes in walls or floors as required and making good the same with brass fitting of seamless half hard temper, with cylindrical and smooth inner and outer surface, and free from air holes cracks and other defects. All CPVC Pipes and fittings should be properly cleaned before joining. All the joints shall be perfectly air and water tight. If require all pipework shall be supported with PVC G.I clips. and complete as per manufactures instruction. All the above work shall be carried out strictly as per the manufactures specifications and instructions - 25 mm dia nominal bore
17Providing, laying, fixing (with adhesive solution as per manufacturers specifications) and testing in position CPVC pipes with all fitting like coupling, transition coupling, reducer coupling, brass coupling, tee, reducer tee, brass FPT tee, elbow, reducer elbow, brass FPT elbow, male and female adapter (CPVC and Brass threads), cap, union, cross, step over bend etc. of Astral or approved equivalent make including concealing the pipes in walls or under floors, including making chases in the walls, fixing in the wall with M.S clamps etc. complete hydraulic testing after laying the pipes as specified including making holes in walls or floors as required and making good the same with brass fitting of seamless half hard temper, with cylindrical and smooth inner and outer surface, and free from air holes cracks and other defects. All CPVC Pipes and fittings should be properly cleaned before joining. All the joints shall be perfectly air and water tight. If require all pipework shall be supported with PVC G.I clips. and complete as per manufactures instruction. All the above work shall be carried out strictly as per the manufactures specifications and instructions - 40MM dia Nominal boreProviding, laying, fixing (with adhesive solution as per manufacturers specifications) and testing in position CPVC pipes with all fitting like coupling, transition coupling, reducer coupling, brass coupling, tee, reducer tee, brass FPT tee, elbow, reducer elbow, brass FPT elbow, male and female adapter (CPVC and Brass threads), cap, union, cross, step over bend etc. of Astral or approved equivalent make including concealing the pipes in walls or under floors, including making chases in the walls, fixing in the wall with M.S clamps etc. complete hydraulic testing after laying the pipes as specified including making holes in walls or floors as required and making good the same with brass fitting of seamless half hard temper, with cylindrical and smooth inner and outer surface, and free from air holes cracks and other defects. All CPVC Pipes and fittings should be properly cleaned before joining. All the joints shall be perfectly air and water tight. If require all pipework shall be supported with PVC G.I clips. and complete as per manufactures instruction. All the above work shall be carried out strictly as per the manufactures specifications and instructions - 40MM dia Nominal bore
18Providing and fixing PVC pipes conforming to relevant IS code Type A including jointing with seal ring and all necessary fittings conforming to IS:5382 leaving 10mm gap for thermal expansion: 100mm dia N.BProviding and fixing PVC pipes conforming to relevant IS code Type A including jointing with seal ring and all necessary fittings conforming to IS:5382 leaving 10mm gap for thermal expansion: 100mm dia N.B
19Providing and fixing PVC pipes conforming to relevant IS code Type A including jointing with seal ring and all necessary fittings conforming to IS:5382 leaving 10mm gap for thermal expansion: 150mm dia N.BProviding and fixing PVC pipes conforming to relevant IS code Type A including jointing with seal ring and all necessary fittings conforming to IS:5382 leaving 10mm gap for thermal expansion: 150mm dia N.B
20Providing and fixing stainless steel jali (grating) with or without hole for waste pipe for floor Nahani trap - 100 to 125 mm dia weight not less than 100 gms. cockroach proofProviding and fixing stainless steel jali (grating) with or without hole for waste pipe for floor Nahani trap - 100 to 125 mm dia weight not less than 100 gms. cockroach proof
21Supply, Installation, Testing & Commissioning of white vitreous china Wall mounting EWC including of approved make, P trap, seat cover, cistern fittings, nuts, bolts, Rubber gasket, wall cutting as required etc., complete. appproved make Jaquar (Kubix ) or Grohe or Kohler or approved equivalentSupply, Installation, Testing & Commissioning of white vitreous china Wall mounting EWC including of approved make, P trap, seat cover, cistern fittings, nuts, bolts, Rubber gasket, wall cutting as required etc., complete. appproved make Jaquar (Kubix ) or Grohe or Kohler or approved equivalent
22Supply, Installation, Testing & Commissioning of Conceled cisten along with face plate of appproved make Jaquar (Kubix ) or Grohe or Kohler or approved equivalentSupply, Installation, Testing & Commissioning of Conceled cisten along with face plate of appproved make Jaquar (Kubix ) or Grohe or Kohler or approved equivalent
23Providing and fixing Health Faucet (Jet Spray) with 1m long flexible pipe with wall hook appproved make Jaquar (Kubix) or Grohe or Kohler or approved equivalentProviding and fixing Health Faucet (Jet Spray) with 1m long flexible pipe with wall hook appproved make Jaquar (Kubix) or Grohe or Kohler or approved equivalent
24Providing and fixing CP brass angular 2 way bib cock , Job icludes dismantling of existing one and removing it from our premises . Material shall be of approved make Jaquar(Kubix)/Grohe/kohlar or approved makeProviding and fixing CP brass angular 2 way bib cock , Job icludes dismantling of existing one and removing it from our premises . Material shall be of approved make Jaquar(Kubix)/Grohe/kohlar or approved make
25Providing and fixing stainless steel kitchen sink (1mm thick) as per IS 13983 with CI brackets and stainless steel plug 40 mm including painting of fitting and brackets, cutting and making good the walls wherever required: Without drain board 535 X 460 bowl depth 178 mm.Providing and fixing stainless steel kitchen sink (1mm thick) as per IS 13983 with CI brackets and stainless steel plug 40 mm including painting of fitting and brackets, cutting and making good the walls wherever required: Without drain board 535 X 460 bowl depth 178 mm.
26Providing and fixing CP brass angle cock of approved quality conforming to IS: 8931of appproved make Jaquar (Kubix) or Grohe or Kohler or approved equivalentProviding and fixing CP brass angle cock of approved quality conforming to IS: 8931of appproved make Jaquar (Kubix) or Grohe or Kohler or approved equivalent
27Providing and fixing white vitreous half stall sensor based urinal with fittings CI MS brackets standard size CP brass flush pipe, spreaders with unions and clamps (all in CP brass) with waste fitting as per IS : 2556, CI trap with outlet grating and other couplings in CP brass including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Single half stall sensor based urinal as per relevant IS code.Providing and fixing white vitreous half stall sensor based urinal with fittings CI MS brackets standard size CP brass flush pipe, spreaders with unions and clamps (all in CP brass) with waste fitting as per IS : 2556, CI trap with outlet grating and other couplings in CP brass including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Single half stall sensor based urinal as per relevant IS code.
28Providing and fixing CP brass stop cock (concealed) along with face, of standard design and of approved make conforming to IS: 8931Providing and fixing CP brass stop cock (concealed) along with face, of standard design and of approved make conforming to IS: 8931
29Providing and fixing 32 mm dia CP brass bottle trap with necessary fittings like wall connection pipe of required length, wall flange, trap pipe upto 300 mm etc complete.Providing and fixing 32 mm dia CP brass bottle trap with necessary fittings like wall connection pipe of required length, wall flange, trap pipe upto 300 mm etc complete.
30Supply and fixing Toilet Paper Holder with Flap Recessed Type (Stainless Steel)Supply and fixing Toilet Paper Holder with Flap Recessed Type (Stainless Steel)
31Supplying and fixing stainless steel auto soap dispenser of approved make of capacity 0.8L of approved make Jaquar (Model-SDR-BLC-DJ0160AS )/ Kohler / Grohe or approved equivalent.Supplying and fixing stainless steel auto soap dispenser of approved make of capacity 0.8L of approved make Jaquar (Model-SDR-BLC-DJ0160AS )/ Kohler / Grohe or approved equivalent.
32Hand Dryer’ Supply of slim stainless steel finished automatic hand dryers, solid state, no touch operting, fully hygienic hand drier of approved shade with blower, continuous repeat usage, time delay, summer and winter control, music while drying, volume ON/OFF controls including providing necessary bracket, cable from drier to plug, plug top key and lock etc. complete as required.single blower of makes and quality as approved by Architect and Engineer - in - Charge. optima of jaquar/EquivalentHand Dryer’ Supply of slim stainless steel finished automatic hand dryers, solid state, no touch operting, fully hygienic hand drier of approved shade with blower, continuous repeat usage, time delay, summer and winter control, music while drying, volume ON/OFF controls including providing necessary bracket, cable from drier to plug, plug top key and lock etc. complete as required.single blower of makes and quality as approved by Architect and Engineer - in - Charge. optima of jaquar/Equivalent
33Automatic Shoe Polishing Machine having 200 ml dispenser capacity and 2 brushes of approved make NovaTech (NTSM3) or Eye Vision or Uniair or approved equivalent.Automatic Shoe Polishing Machine having 200 ml dispenser capacity and 2 brushes of approved make NovaTech (NTSM3) or Eye Vision or Uniair or approved equivalent.
34Paper Towel Dispensor of multifold type paper of approved make Euronics (EP23) or Jaquar or Kimberly Clark or approved equivalentPaper Towel Dispensor of multifold type paper of approved make Euronics (EP23) or Jaquar or Kimberly Clark or approved equivalent
35DEMOLITION WALL OR CUTTING WITH WALL CUTTER FOR WINDOW/VENTILAOR CUT OUT - Dismantling brick masonry or reinforced brick masonry along with plaster in cement mortar and including stacking of serviceable materials and disposal of unserviceable materials outside our premises to approved dumping grounds of local Municipal Authorities. In existing wall for creation of Window/Ventilator etc, as per ENGG I/CDEMOLITION WALL OR CUTTING WITH WALL CUTTER FOR WINDOW/VENTILAOR CUT OUT - Dismantling brick masonry or reinforced brick masonry along with plaster in cement mortar and including stacking of serviceable materials and disposal of unserviceable materials outside our premises to approved dumping grounds of local Municipal Authorities. In existing wall for creation of Window/Ventilator etc, as per ENGG I/C

AI Tender Summary

OUR REF NO 58244255
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 18-11-2026
Authority
Authority Name Haridwar Natural Gas Private Limited
Work Description Bids Are invited for Custom Bid For Services - Interior Renovation Of Hngpl Proposed Office Space At Khasra No 2483 M Arya Nagar Chowk Jwalapur Near Soni Nursing Home Haridwar Uk - Plain Cement Concrete (Pcc)-: Providing, Laying , Consolidating And Curing Plain Cement Concrete (P.C.C.) As Required Including The Cost Of Centering And Shuttering Etc, Provision Of Glass Strips For Expansion Joints, Etc. If Required As Directed, With Ordinary Portland Cement (Opc) Of Approved Make Including As Specified. P.C.C. 1:2:4 Mix (1 Cement: 2 Coarse Sand:4 Graded Stone Agregates Of 20 Mm Nominal Size) , Providing, Laying , Consolidating And Curing Plain Cement Concrete (P.C.C.) As Required Including The Cost Of Centering And Shuttering Etc. As Directed, With Ordinary Portland Cement (Opc) Of Approved Make Including As Specified. P.C.C. 1:3:6 Mix (1 Cement: 3 Coarse Sand: 6 Graded Stone Agregates 20 Mm Nominal Size) , Providing Dry Trap / Granite / Quartzite Rubble Stone Soling In Layers Of 15 To 20Cm.Thick Including Hand Packing And Consolidation With Mechanical Rammer Etc. , Providing And Placing Steel Reinforcement In Position For Rcc Works Including Strainghtening, Cutting, Bending, Placing In Position And Binding All Complete Including Cleaning And Making It Free From Oil, Grease Etc. Complete. Cold Twisted Bars (Tor Steel) - Fe 500 , Construction Of 6 Thk Brcikwall:Providing And Laying Autoclaved Aerated Cement Blocks Masonry With > 200 Mm Thick Aac Blocks In Super Structure Above Plinth Level Up To Floor V Level In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand ) Complete In All Respects Complying With Relevant Standard Specifications And As Directed By The Bpcl , Construction Of 9 Thk Brcikwall: Providing And Laying Autoclaved Aerated Cement Blocks Masonry With < 200 Mm Thick Aac Blocks In Super Structure Above Plinth Level Up To Floor V Level In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand ) Complete In All Respects Complying With Relevant Standard Specifications And As Directed By The Bpcl.The Rate To Include Cost Of Providing, Laying In Position The Rcc Stiffener With 2 Nos 6 Mm Dia M.S. Bars At Every Third Course Of Masonry Work. Wherever Necessary Proper Setting Curing Etc., Complete In All Respects Complying With Relevant Standard Specifications And As Directed By The Bpcl. , M.S Framing Work : Providing, Fabricating, Erecting And Fixing In Position Structral Members Made Out Of Ms Square Bars, Ms Flats, Structural Steel Sections With All Joints Welded Bolted Screwed And Grinding As Required Fixed By Lugs And Welding With Inserts In Rcc Masonary Works Complete As Per Approved Design Including A Coat Of Red Oxide Primer And Two Coats Of Synthic Enamel Paint Of Approved Shade Etc.Complete. , Cement Plaster – Internal : Providing And Applying 12-15 Mm (Avg) Thick Cement Plaster In Cement Mortar 1:4 With/ Without Neeru Finished Smooth Wherever Instructed By The Architect For All Plain / Curved Surfaces Of Brick / Block / Rcc Walls And Finishing The Same (Smooth Or Broom) In Correct Line, Level & Plumb, Making Of Edges, Corners, Sill, Jambs, Soffits, Grooves, Pattas Etc. As Per Drawings & Relevant Specifications Including All Necessary Surface Preparation, Scaffolding Etc. Complete. The Rate Shall Be Inclusive Of Providing And Fixing Of Pvc Chicken Mesh Of Approved Quality At All Junctions Of Rcc & Masonry Work, Hacking Of Concrete Surface To Receive Plaster, Watering, Curing, Cleaning Etc. Complete At All Levels And Heights Etc. Complete In All Respects Including Scaffolding, Bonding Agent, Curing And As Directed By The Architect. , Wall Dado (In Kitchen Rooms) :Providing, Laying And Fixing The Following Tiles Of Approved Quality, Shade And Make, Filling Joints With Cement Admixed With Matching Pigments And Cleaning Etc.Complete As Directed In The Required Pattern On Existing Flooring Or Walls Or Skirting With Suitable Adhesive Including Surface Prepration I.E., Cleaning, Chipping, Hacking Etc., As Required. Vitrified Tiles Of Upto Size 60X60cm , Providing Half Round Edge Moulding To 18 Mm Thick Granite Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc.Complete As Per Design Approved By Engineer-In-Charge. , Providing Full Round Edge Moulding To 18 Mm Thick Granite Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc.Complete As Per Design Approved By Engineer-In-Charge. , Providing Champher Edge Moulding To 18 Mm Thick Granite Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc.Complete As Per Design Approved By Engineer-In-Charge. , Double Patti Granite Frame :Providing And Erecting Door Frame Window Cills In Step Pattern In Jet Black Granite Of 17 To 19Mm Thick On Inside And Outside In Required Sizes As Per The Site. Cills To Be Fixed In Perfect Line, Level And Plumb On Required Thickness Of Cement Bedding In Cm 1:3. Granite Cill To Have Full Round Polishing As Required Moulded Nosing On The Entire Running Length Only On Internal Side And The Moulding Shall Be Machine Polished. (Basic Rate Of Granite Rs 185- Per Sqft. Step Shall Not Be Measured For Payment Purpose.) , Kitchen Platform: Providing And Fixing Kitchen Platform With Required Cutouts For Sink. The Counter Top, Shelves, Vertical Partitions Etc. To Have 40Mm Thick Cuddappah Undercarriage Supported On Brackets And Top Finished In 17 To 19Mm Thick Telephonic Black Granite. The Facia To Be Of Black Granite 75Mm Wide Along The Length Of The Counter With Full Round Moulding Polished Etc. The Cost To Include Full Round Moulding Along The Perimeter Of The Sink Cutout (Polished), Making Holes For Gas Pipes In The Wall Counter Top, Fixing The Stainless Steel Sink But Excluding The Cost Of Sink And Cp Brass Fittings. The Exposed Vertical Side Of L-Shape Shall Be Cladded With 17 To 19Mm Thick Telephonic Black Granite Slab (With 3 Inch Extended Heigth Above The Kitchen Platform) With Full Round Edge Moulding And Polishing Etc. The Basic Cost Of Granite Rs. 185- Per Sqft. The Item Shall Include Providing And Fixing Angular Shape Pvc Pipe Of Required Dia. And Length For Hosing Lpg Gas Pipe. (Only Plan Area Will Be Measured For The Purpose Of Payment.) , Providing, Laying, Fixing (With Adhesive Solution As Per Manufacturers Specifications) And Testing In Position Cpvc Pipes With All Fitting Like Coupling, Transition Coupling, Reducer Coupling, Brass Coupling, Tee, Reducer Tee, Brass Fpt Tee, Elbow, Reducer Elbow, Brass Fpt Elbow, Male And Female Adapter (Cpvc And Brass Threads), Cap, Union, Cross, Step Over Bend Etc. Of Astral Or Approved Equivalent Make Including Concealing The Pipes In Walls Or Under Floors, Including Making Chases In The Walls, Fixing In The Wall With M.S Clamps Etc. Complete Hydraulic Testing After Laying The Pipes As Specified Including Making Holes In Walls Or Floors As Required And Making Good The Same With Brass Fitting Of Seamless Half Hard Temper, With Cylindrical And Smooth Inner And Outer Surface, And Free From Air Holes Cracks And Other Defects. All Cpvc Pipes And Fittings Should Be Properly Cleaned Before Joining. All The Joints Shall Be Perfectly Air And Water Tight. If Require All Pipework Shall Be Supported With Pvc G.I Clips. And Complete As Per Manufactures Instruction. All The Above Work Shall Be Carried Out Strictly As Per The Manufactures Specifications And Instructions - 20 Mm Dia Nominal Bore , Providing, Laying, Fixing (With Adhesive Solution As Per Manufacturers Specifications) And Testing In Position Cpvc Pipes With All Fitting Like Coupling, Transition Coupling, Reducer Coupling, Brass Coupling, Tee, Reducer Tee, Brass Fpt Tee, Elbow, Reducer Elbow, Brass Fpt Elbow, Male And Female Adapter (Cpvc And Brass Threads), Cap, Union, Cross, Step Over Bend Etc. Of Astral Or Approved Equivalent Make Including Concealing The Pipes In Walls Or Under Floors, Including Making Chases In The Walls, Fixing In The Wall With M.S Clamps Etc. Complete Hydraulic Testing After Laying The Pipes As Specified Including Making Holes In Walls Or Floors As Required And Making Good The Same With Brass Fitting Of Seamless Half Hard Temper, With Cylindrical And Smooth Inner And Outer Surface, And Free From Air Holes Cracks And Other Defects. All Cpvc Pipes And Fittings Should Be Properly Cleaned Before Joining. All The Joints Shall Be Perfectly Air And Water Tight. If Require All Pipework Shall Be Supported With Pvc G.I Clips. And Complete As Per Manufactures Instruction. All The Above Work Shall Be Carried Out Strictly As Per The Manufactures Specifications And Instructions - 25 Mm Dia Nominal Bore , Providing, Laying, Fixing (With Adhesive Solution As Per Manufacturers Specifications) And Testing In Position Cpvc Pipes With All Fitting Like Coupling, Transition Coupling, Reducer Coupling, Brass Coupling, Tee, Reducer Tee, Brass Fpt Tee, Elbow, Reducer Elbow, Brass Fpt Elbow, Male And Female Adapter (Cpvc And Brass Threads), Cap, Union, Cross, Step Over Bend Etc. Of Astral Or Approved Equivalent Make Including Concealing The Pipes In Walls Or Under Floors, Including Making Chases In The Walls, Fixing In The Wall With M.S Clamps Etc. Complete Hydraulic Testing After Laying The Pipes As Specified Including Making Holes In Walls Or Floors As Required And Making Good The Same With Brass Fitting Of Seamless Half Hard Temper, With Cylindrical And Smooth Inner And Outer Surface, And Free From Air Holes Cracks And Other Defects. All Cpvc Pipes And Fittings Should Be Properly Cleaned Before Joining. All The Joints Shall Be Perfectly Air And Water Tight. If Require All Pipework Shall Be Supported With Pvc G.I Clips. And Complete As Per Manufactures Instruction. All The Above Work Shall Be Carried Out Strictly As Per The Manufactures Specifications And Instructions - 40Mm Dia Nominal Bore , Providing And Fixing Pvc Pipes Conforming To Relevant Is Code Type A Including Jointing With Seal Ring And All Necessary Fittings Conforming To Is:5382 Leaving 10Mm Gap For Thermal Expansion: 100Mm Dia N.B , Providing And Fixing Pvc Pipes Conforming To Relevant Is Code Type A Including Jointing With Seal Ring And All Necessary Fittings Conforming To Is:5382 Leaving 10Mm Gap For Thermal Expansion: 150Mm Dia N.B , Providing And Fixing Stainless Steel Jali (Grating) With Or Without Hole For Waste Pipe For Floor Nahani Trap - 100 To 125 Mm Dia Weight Not Less Than 100 Gms. Cockroach Proof , Supply, Installation, Testing & Commissioning Of White Vitreous China Wall Mounting Ewc Including Of Approved Make, P Trap, Seat Cover, Cistern Fittings, Nuts, Bolts, Rubber Gasket, Wall Cutting As Required Etc., Complete. Appproved Make Jaquar (Kubix ) Or Grohe Or Kohler Or Approved Equivalent , Supply, Installation, Testing & Commissioning Of Conceled Cisten Along With Face Plate Of Appproved Make Jaquar (Kubix ) Or Grohe Or Kohler Or Approved Equivalent , Providing And Fixing Health Faucet (Jet Spray) With 1M Long Flexible Pipe With Wall Hook Appproved Make Jaquar (Kubix) Or Grohe Or Kohler Or Approved Equivalent , Providing And Fixing Cp Brass Angular 2 Way Bib Cock , Job Icludes Dismantling Of Existing One And Removing It From Our Premises . Material Shall Be Of Approved Make Jaquar(Kubix)/Grohe/Kohlar Or Approved Make , Providing And Fixing Stainless Steel Kitchen Sink (1Mm Thick) As Per Is 13983 With Ci Brackets And Stainless Steel Plug 40 Mm Including Painting Of Fitting And Brackets, Cutting And Making Good The Walls Wherever Required: Without Drain Board 535 X 460 Bowl Depth 178 Mm. , Providing And Fixing Cp Brass Angle Cock Of Approved Quality Conforming To Is: 8931Of Appproved Make Jaquar (Kubix) Or Grohe Or Kohler Or Approved Equivalent , Providing And Fixing White Vitreous Half Stall Sensor Based Urinal With Fittings Ci Ms Brackets Standard Size Cp Brass Flush Pipe, Spreaders With Unions And Clamps (All In Cp Brass) With Waste Fitting As Per Is : 2556, Ci Trap With Outlet Grating And Other Couplings In Cp Brass Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required. Single Half Stall Sensor Based Urinal As Per Relevant Is Code. , Providing And Fixing Cp Brass Stop Cock (Concealed) Along With Face, Of Standard Design And Of Approved Make Conforming To Is: 8931 , Providing And Fixing 32 Mm Dia Cp Brass Bottle Trap With Necessary Fittings Like Wall Connection Pipe Of Required Length, Wall Flange, Trap Pipe Upto 300 Mm Etc Complete. , Supply And Fixing Toilet Paper Holder With Flap Recessed Type (Stainless Steel) , Supplying And Fixing Stainless Steel Auto Soap Dispenser Of Approved Make Of Capacity 0.8L Of Approved Make Jaquar (Model-Sdr-Blc-Dj0160as )/ Kohler / Grohe Or Approved Equivalent. , Hand Dryer Supply Of Slim Stainless Steel Finished Automatic Hand Dryers, Solid State, No Touch Operting, Fully Hygienic Hand Drier Of Approved Shade With Blower, Continuous Repeat Usage, Time Delay, Summer And Winter Control, Music While Drying, Volume On/Off Controls Including Providing Necessary Bracket, Cable From Drier To Plug, Plug Top Key And Lock Etc. Complete As Required.Single Blower Of Makes And Quality As Approved By Architect And Engineer - In - Charge. Optima Of Jaquar/Equivalent , Automatic Shoe Polishing Machine Having 200 Ml Dispenser Capacity And 2 Brushes Of Approved Make Novatech (Ntsm3) Or Eye Vision Or Uniair Or Approved Equivalent. , Paper Towel Dispensor Of Multifold Type Paper Of Approved Make Euronics (Ep23) Or Jaquar Or Kimberly Clark Or Approved Equivalent , Demolition Wall Or Cutting With Wall Cutter For Window/Ventilaor Cut Out - Dismantling Brick Masonry Or Reinforced Brick Masonry Along With Plaster In Cement Mortar And Including Stacking Of Serviceable Materials And Disposal Of Unserviceable Materials Outside Our Premises To Approved Dumping Grounds Of Local Municipal Authorities. In Existing Wall For Creation Of Window/Ventilator Etc, As Per Engg I/C
Basic Detail
Tender No GEM/2026/B/8207321
Bidding Type Tender
Location
City Haridwar
State Uttarakhand
Key Dates
Publish Date 28 Oct 2026
Submission Date 18 Nov 2026
Open Date 19 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 3.05 Lakhs
Exemption Not Available
Document List
8e7648e1-921e-4d20-8ca5-b97f3027e362.pdf
1793168081.xlsx
1793101953.pdf
1793101955.pdf
1793168089.pdf
1793168096.pdf
1793168101.pdf
1793168108.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 28, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Nov 19, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 17 days

Tender Documents

Download All (ZIP) ↓
pdf

8e7648e1-921e-4d20-8ca5-b97f3027e362.pdf

xlsx

1793168081.xlsx

pdf

1793101953.pdf

pdf

1793101955.pdf

pdf

1793168089.pdf

pdf

1793168096.pdf

pdf

1793168101.pdf

pdf

1793168108.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender