Bids Are invited for Hss And Carbide Drill
Tender Overview
Project Description
Bids Are invited for Item-1 - Hss Centre Drills, Pilot Dia 2Mm Body Dia 5Mm , Item-2 - Hss Centre Drills, Pilot Dia 2.50Mm, Body Dia 6.30Mm , Item-3 - Hss Centre Drills, Pilot Dia 3.15Mm, Body Dia 8Mm , Item-4 - Hss Centre Drills, Pilot Dia 4 Mm, Body Dia 10 Mm , Item-5 - Hss Parallel Shank Drill Bits 2.40Mm , Item-6 - Hss Parallel Shank Drill Bits 2.50Mm , Item-7 - Hss Parallel Shank Drill Bits 3.00Mm , Item-8 - Hss Parallel Shank Drill Bits 3.30Mm , Item-9 - Hss Parallel Shank Drill Bits 3.40Mm , Item-10 - Hss Parallel Shank Drill Bits 3.50Mm , Item-11 - Hss Parallel Shank Drill Bits 4.10Mm , Item-12 - Hss Parallel Shank Drill Bits 4.20Mm , Item-13 - Hss Parallel Shank Drill Bits 4.30Mm , Item-14 - Hss Parallel Shank Drill Bits 5.00Mm , Item-15 - Hss Parallel Shank Drill Bits 5.10Mm , Item-16 - Hss Parallel Shank Drill Bits 5.20Mm , Item-17 - Hss Parallel Shank Drill Bits 5.30Mm , Item-18 - Hss Tap Set M3.0Mm X0.6Mm Pitch , Item-19 - Hss Tap Set M4.0Mm X0.7Mm Pitch , Item-20 - Hss Tap Set M5.0Mm X0.8Mm Pitch , Item-21 - Hss Tap Set M6.0Mm X1.0Mm Pitch , Item-22 - Hss Tap Set M8.0Mm X1.25Mm Pitch , Item-23 - Hss End Mill Cutter 4.0Mm , Item-24 - Hss End Mill Cutter 5.0Mm , Item-25 - Hss End Mill Cutter 6.0Mm , Item-26 - Hss End Mill Cutter 8.0Mm , Item-27 - High Speed Steel (Hss) Tool Bit Of Square Cross Section With Following Specification-- 1) Size 1/2 Inch X 6.0 Inch Long. 2) Hardness (Hv) Minimum 760. , Item-28 - High Speed Steel (Hss) Square Cross Section Tool Bit With Following Specifications-- 1) Size 3/4 Inch X 6 Inch Long. 2) Hardness (Hv) Minimum 720 , Item-29 - High Speed Steel (Hss) Square Cross Section Tool Bit With Following Specifications-- 1) Size 1/2 Inch (12-13 Mm) X 6 Inch (150 Mm) Long. 2) Hardness (Hv) Minimum 720 , Item-30 - High Speed Steel (Hss) Square Cross Section Tool Bit With Following Specifications-- 1) Size 3/8 Inch X 6 Inch Long. 2) Hardness (Hv) Minimum 720 , Item-31 - High Speed Steel (Hss) Square Cross Section Tool Bit With Following Specifications-- 1) Size 5/8 Inch X 6 Inch Long. 2) Hardness (Hv) Minimum 720 , Item-32 - Tungsten Carbide End Mill Cutter Parallel Shank Size 4Mm , Item-33 - Tungsten Carbide End Mill Cutter Parallel Shank Size In 5Mm , Item-34 - Tungsten Carbide End Mill Cutter Parallel Shank Size In 6 Mm , Item-35 - Tungsten Carbide End Mill Cutter Parallel Shank Size In 8 Mm , Item-36 - Tungsten Carbide End Mill Cutter Parallel Shank Size In 10 Mm , Item-37 - Tungsten Carbide End Mill Cutter Parallel Shank Size In 12 Mm , Item-38 - Tungsten Carbide End Mill Cutter Parallel Shank Size In 14 Mm , Item-39 - Tungsten Carbide Parallel Shank Drill Size In 2Mm , Item-40 - Tungsten Carbide Parallel Shank Drill Size In 2.5 Mm , Item-41 - Tungsten Carbide Parallel Shank Drill Size In 3 Mm , Item-42 - Tungsten Carbide Parallel Shank Drill Size In 3.1 Mm , Item-43 - Tungsten Carbide Parallel Shank Drill Size In 3.2 Mm , Item-44 - Tungsten Carbide Parallel Shank Drill Size In 4 Mm , Item-45 - Tungsten Carbide Parallel Shank Drill Size In 4.1 Mm , Item-46 - Tungsten Carbide Parallel Shank Drill Size In 5 Mm , Item-47 - Tungsten Carbide Parallel Shank Drill Size In 6 Mm , Item-48 - Tungsten Carbide Parallel Shank Drill Size In 6.5 Mm , Item-49 - Tungsten Carbide Parallel Shank Drill Size In 6.8 Mm , Item-50 - Tungsten Carbide Parallel Shank Drill Size In 8 Mm , Item-51 - Tungsten Carbide Parallel Shank Drill Size In 8.6 Mm , Item-52 - Tungsten Carbide Parallel Shank Drill Size In 12 Mm , Item-53 - Tungsten Carbide Parallel Shank Extra Long Drill Size In 5 Mm , Item-54 - Tungsten Carbide Parallel Shank Extra Long Drill Size In 6 Mm , Item-55 - Tungsten Carbide Parallel Shank Extra Long Drill Size In 8 Mm
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | item-1 | HSS Centre drills, Pilot Dia 2mm Body Dia 5mm |
| 2 | item-2 | HSS Centre drills, Pilot Dia 2.50mm, Body Dia 6.30mm |
| 3 | item-3 | HSS Centre drills, Pilot Dia 3.15mm, Body Dia 8mm |
| 4 | item-4 | HSS Centre drills, Pilot Dia 4 mm, Body Dia 10 mm |
| 5 | item-5 | HSS Parallel shank drill bits 2.40mm |
| 6 | item-6 | HSS Parallel shank drill bits 2.50mm |
| 7 | item-7 | HSS Parallel shank drill bits 3.00mm |
| 8 | item-8 | HSS Parallel shank drill bits 3.30mm |
| 9 | item-9 | HSS Parallel shank drill bits 3.40mm |
| 10 | item-10 | HSS Parallel shank drill bits 3.50mm |
| 11 | item-11 | HSS Parallel shank drill bits 4.10mm |
| 12 | item-12 | HSS Parallel shank drill bits 4.20mm |
| 13 | item-13 | HSS Parallel shank drill bits 4.30mm |
| 14 | item-14 | HSS Parallel shank drill bits 5.00mm |
| 15 | item-15 | HSS Parallel shank drill bits 5.10mm |
| 16 | item-16 | HSS Parallel shank drill bits 5.20mm |
| 17 | item-17 | HSS Parallel shank drill bits 5.30mm |
| 18 | item-18 | HSS Tap set M3.0mm X0.6mm pitch |
| 19 | item-19 | HSS Tap set M4.0mm X0.7mm pitch |
| 20 | item-20 | HSS Tap set M5.0mm X0.8mm pitch |
| 21 | item-21 | HSS Tap set M6.0mm X1.0mm pitch |
| 22 | item-22 | HSS Tap set M8.0mm X1.25mm pitch |
| 23 | item-23 | HSS End mill cutter 4.0mm |
| 24 | item-24 | HSS End mill cutter 5.0mm |
| 25 | item-25 | HSS End mill cutter 6.0mm |
| 26 | item-26 | HSS End mill cutter 8.0mm |
| 27 | item-27 | High Speed Steel (HSS) Tool bit of square cross section with following specification-- 1) Size 1/2 inch X 6.0 inch Long. 2) Hardness (HV) Minimum 760. |
| 28 | item-28 | High Speed Steel (HSS) Square cross section Tool Bit with following specifications-- 1) Size 3/4 inch X 6 inch Long. 2) Hardness (HV) Minimum 720 |
| 29 | item-29 | High Speed Steel (HSS) Square cross section Tool Bit with following specifications-- 1) Size 1/2 inch (12-13 mm) X 6 inch (150 mm) Long. 2) Hardness (HV) Minimum 720 |
| 30 | item-30 | High Speed Steel (HSS) Square cross section Tool Bit with following specifications-- 1) Size 3/8 inch X 6 inch Long. 2) Hardness (HV) Minimum 720 |
| 31 | item-31 | High Speed Steel (HSS) Square cross section Tool Bit with following specifications-- 1) Size 5/8 inch X 6 inch Long. 2) Hardness (HV) Minimum 720 |
| 32 | item-32 | Tungsten Carbide End Mill Cutter Parallel Shank Size 4mm |
| 33 | item-33 | Tungsten Carbide End Mill Cutter Parallel Shank Size in 5mm |
| 34 | item-34 | Tungsten Carbide End Mill Cutter Parallel Shank Size in 6 mm |
| 35 | item-35 | Tungsten Carbide End Mill Cutter Parallel Shank Size in 8 mm |
| 36 | item-36 | Tungsten Carbide End Mill Cutter Parallel Shank Size in 10 mm |
| 37 | item-37 | Tungsten Carbide End Mill Cutter Parallel Shank Size in 12 mm |
| 38 | item-38 | Tungsten Carbide End Mill Cutter Parallel Shank Size in 14 mm |
| 39 | item-39 | Tungsten Carbide Parallel Shank drill Size in 2mm |
| 40 | item-40 | Tungsten Carbide Parallel Shank drill Size in 2.5 mm |
| 41 | item-41 | Tungsten Carbide Parallel Shank drill Size in 3 mm |
| 42 | item-42 | Tungsten Carbide Parallel Shank drill Size in 3.1 mm |
| 43 | item-43 | Tungsten Carbide Parallel Shank drill Size in 3.2 mm |
| 44 | item-44 | Tungsten Carbide Parallel Shank drill Size in 4 mm |
| 45 | item-45 | Tungsten Carbide Parallel Shank drill Size in 4.1 mm |
| 46 | item-46 | Tungsten Carbide Parallel Shank drill Size in 5 mm |
| 47 | item-47 | Tungsten Carbide Parallel Shank drill Size in 6 mm |
| 48 | item-48 | Tungsten Carbide Parallel Shank drill Size in 6.5 mm |
| 49 | item-49 | Tungsten Carbide Parallel Shank drill Size in 6.8 mm |
| 50 | item-50 | Tungsten Carbide Parallel Shank drill Size in 8 mm |
| 51 | item-51 | Tungsten Carbide Parallel Shank drill Size in 8.6 mm |
| 52 | item-52 | Tungsten Carbide Parallel Shank drill Size in 12 mm |
| 53 | item-53 | Tungsten Carbide Parallel Shank extra long drill Size in 5 mm |
| 54 | item-54 | Tungsten Carbide Parallel Shank extra long drill Size in 6 mm |
| 55 | item-55 | Tungsten Carbide Parallel Shank extra long drill Size in 8 mm |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
TodayBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender