Tender For Conversion Of Existing Parking Shed Into Night Flying Store At Atc At Af Stn Bkt
Tender Value
4.84 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
19 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Conversion Of Existing Parking Shed Into Night Flying Store At Atc At Af Stn Bkt
BOQ
| Sl. No. | Item Description |
| 1 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting, welding, reviting and other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running, rails and guides) and hanging also fastening and fixing with locking brackets and handles for opening and closing complete all as specified and directed. |
| 2 | M&L for painting new steel surfaces of any description, over 10cm in width or girth, not otherwise described with preparation of new or previously not treated surfaces with two coat of synthetic enamel coat over one coat of red oxide, zinc chrome primer complete all as specified and directed (Make:- M/s Asian Paints Apcolite Premium Glass Enamel/Nerolac Synthetic High-Glass Enamel/Berger Hi-Glass Luxol) |
| 3 | M&L for preparation of old painted steel surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed (Make:- M/s Asian Paints Apcolite Premium Glass Enamel/Nerolac Synthetic High-Glass Enamel/Berger Hi-Glass Luxol) |
| 4 | M&L for cutting holes in brick walls built in cement mortar or concrete columns for inserting holdfasts (exc half brick but not exc one bricks) and making good dismantled portion in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as required and removing surplus hardcore and rubbish complete all as specified and directed. |
| 5 | Taking down existing Mild steel angle door of size 2.5m width and 2.4m height with holdfast and hanging hinges, and refixing to other opening and making good of the jambs and holes with brick bats and plastering as required after taking down and removing the door to a distance not exc. 200 metres including loading/unloading as directed etc complete all as specified and directed. |
| 6 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed. |
| 7 | Supply only liquid water proofing compound, ISI marked complete all as specified and directed. (Make : Dr Fixit/Asian Paints smart care/Sika India Pvt. Ltd) |
| 8 | Demolition of brick masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 9 | M&L for Brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius and setting in cement mortar (1:6) complete all as specified and directed. |
| 10 | Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed. |
| 11 | M&L for 15mm thick rendering on brick work in cement mortar (1:6) and surface finished even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L for 15mm thick rendering on fair faces of brick work, concrete surfaces (external walls) in cement mortar (1:4) mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified and directed. Note : (i) WPC shall be measured and paid separately under specification of Sch 'A'. |
| 13 | M&L for providing reinforced cement concrete (1:2 :4) type B1 using (20mm graded stone aggregate) as in platform slab supported on wall, beam, cantilevers and platform including necessary formwork complete all as specified and directed. |
| 14 | M&L mild steel TMT bars, 8mm mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 15 | M&L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregates in subbase, foundation, filling and mass concrete complete all as specified and directed. |
| 16 | M&L for machine cut Kota stone slab 18-20 mm thick (of size not less than 55 cm x 55 cm in flooring laid and jointed with grey cement slurry mixed with pigment to match shade of the slab, over and including cement screed bed 20mm thick in cement mortar (1:6) base including rubbing and mirror polishing etc,complete all as specified. |
| 17 | M&L for machine cut Kota stone slab 18-22 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and Mirror polishing with including half round edge moulding but as in vertical surfaces such as skirting over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, complete all as specified. |
| 18 | M&L for applying 1 mm thick wall care white putty in two layers white wall care putty on walls complete all as specified and directed. |
| 19 | M&L for preparation and applying two coats of oil emulsion distemper over one coat of primer on new putty surfaces of walls complete all as specified and directed. (Make:- M/s Asian Paints Tractor Uno/Nerolac Beuty Acrylic/Berger Bison) |
| 20 | M&L for preparation of surfaces and applying two coat of white wash on newly plastered surfaces of walls complete all as specified and directed. |
| 21 | M&L for preparation of surfaces and applying one coat of white wash on old surfaces of ceiling complete all as specified and directed. |
| 22 | Complete removal or existing treatment on wall/roof projections including fascia cornices etc by scrapping with mechanical sander (having mechanical vaccum machine, scruber) with sanding pad adjustable size according to high of building of appropriate grit to make surface clean free from dust loose paint etc by skilled labour complete all as specified and directed. Note: Contractor shall ensured that all deployed labour's on operations, like painting & misc building repairs & maintenance work, electricity subjected repairs & instrallation and its testing related have to maintained according to CA & related regulated other agency norms as followed, No extra payment will be entertained by the department on this account. |
| 23 | M&L for preparation of newly putty surfaces of walls and applying two or more coats of 100% premium acrylic emulsion in Comouflaging tri or other pattern having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltrs/ 10 Sqm over and including priming coat of exterior primer applied @0.9 ltr/10sqm over new by prepare surface complete all as specified and directed.(Make:- Asian Paint Apex Ultima/Berger Weather Coat Long Life 10/Nerolac Excel Everlast-12) |
| 24 | Roughening surfaces of old concrete floor/terrace by picking including taking down existing detoriated / decayed tar felt or any other treatment including roof tiles etc. loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials/debris to a distance not exc. 100 metres including loading/unloading and removing to a place complete all as specified and directed. |
| 25 | M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in padding on roof top including WPC as per manufacturers instructions to achieve the slop required, and finished even and fair without using extra cement complete all as specified and directed. (WPC shall be measured and paid separately under relevant item of Sch 'A'. |
| 26 | M&L for 10 mm thick screed bed or bedding layer in CM (1:3) mixed with water proofing compound as per manufacturer instructions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 27 | M&L for 10 mm thick screed bed or bedding layer in CM (1:3) mixed with water proofing compound as per manufacturer instructions on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender