Tender For Addn/Altn To Building No Bt-8 And Bt-6/3 And 6/4 At Afs Amla
Tender Value
38.50 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
20 days left
EMD
77000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betul → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addn/Altn To Building No Bt-8 And Bt-6/3 And 6/4 At Afs Amla
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set, over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in coloured cement to match of lighter shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 4 | All as per item No. 3 above but in vertical surfaces, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:4 complete all as specified and directed. |
| 5 | M&L for digital glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/450 x 300 x 7 mm thick,etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles including 10mm thick backing coat in 1:4 cement mortor complete all as specified and directed. |
| 6 | M&L for yellow/ Red colour pre-polished rubber moulded chequred cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 7 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed. |
| 8 | M&L for Granite (Z Black) 18 to 20 mm thick table rubbed & polished in steps , jambs, cills, shelves, chowkats etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixture of pigment to match with the shade of granite over and including 15mm thick screed in CM 1:4 complete all as specified and as directed . |
| 9 | M&L for machine cut kota stone slab 20-25 mm thick (size of each stone not less than 55cm x 55cm), laid in flooring, over and including cement screed bed 20mm thick in cement mortar (1:6) base set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete all as specified and directed. |
| 10 | M&L for machine cut kota stone slab 20-25mm thick (size of each stone in single piece, laid on vertical surfaces of skirting/dado, over and including 15 mm thick rendering in cement mortar (1:4) and set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Mirror finish) complete all as specified and directed. |
| 11 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed. |
| 12 | M&L for brickwork with fly ash ,subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all complete as specified and as directed. |
| 13 | Taking down, cement plaster of any description from brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc and disposing of the rubbish materials in low lying areas of defence land complete all as specified and as directed. |
| 14 | M & L for 10 mm thick rendering in 1:6 CM on wall of fair faces brick & concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L (10+5)mm thick for rendering fair faces of brick work or Concrete surface in two coats 10mm thick in CM(1:6) as under coat 5mm thick CM (1:4) as finishing coat in two separate layer mixed with Liquid water proofing compound finished even and smooth without using extra cement at any height including necessary scaffolding, ladder, formwork etc complete all as specified and as directed. Note: Water proofing compund shall be measured and paied seperately. |
| 16 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 17 | M & L for preparing of old/new decorative any interior surface of walls and applying average 3mm interior wall care putty followed by two coat of internal emulsion paint, anti-fungal and anti-bacterial (Asian- Royale or equivalent of approved make as approved by GE) on wall over a coat of interior primer on any surfaces using airless spray technology with max working presssure of 3300PSI and capable to operating single spray gun with max material whole length of 30mtr. The spray machine should be reported manufacturer with pro-gaurd technology and capability of tracking pressure and paint uses and certified by paint manufacturer and accesosries to be able to spray in hard to reach areas penetration of paint on the surface by smart periodical methodology/auto roller, complete all as specified and directed. |
| 18 | M&L for complete removal/preparation of existing/new (Cement Base Paint/White Wash/OBD/Exterior weather paint/Oil paint etc) of external decorative surface of walls, cornices, jambs, cills, parapet wall, pillars etc or any other description by scrapping with mechanical wall sander (having mechanical vacume mechanism) with RPM not less than 1500, sanding pad of 80 grit having dia of 7\\"/9\\" or scrapping with wire brishesto to make the surface free from dust, loose paint, removal of nails etc including fillings depression surfaces, cracks/holes by waterproof cement based putty complete by skilled labour to the entire satisfaction by EIC complete all as specified and directed. |
| 19 | M&L for preparation of external old/new decorative surfaces of walls and applying two coat of weather shield/waterproof Acrylic exterior emulsion paint (Apex Ultima Luxury enulsion of Asian or equivalent of approvd make as approved by GE) by skilled labour and applying one coat of acrylic water based exterior grade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats including filling cracks with wall care putty wherever necessary complete all as specified and directed. Note : Colour and shade as per new colour scheme approved by GE. |
| 20 | M & L for preparation by grinder or otherwise of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 21 | M&L for preparation of old painted wooden Surfaces by grinder or otherwise of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 22 | Dismantling of wall, display board/ceiling board fibre, pulp, insulation etc or insulation board/slab/wool of any thickness including cover fillets complete all as specified and directed. |
| 23 | S & F size of grid 605X605mm Anodised aluminium snap grid frame work for false ceiling all as specified and directed with hangers 6mm dia GI cup to 1200mm length adjusting lvel fixed to roof slab by means of ceiling leat of GI flat 40x3mm and 60mm long and expension holed fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 24 | M&L for 4mm thick non asbestos fibre cement building board fixed in cement ceiling flat or sloping to GI/aluiminium frame work complete all as specified and as directed. |
| 25 | Dismantling Asbestos Cement (Corrugated, semi corrugated etc) steel sheeting in covering any gauge, thickness, including Nainital or similar pattern roof coveringsering complete all as specified and directed. |
| 26 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering /cladding to wall /roof covering fixed with self tapping screw complete all as specified and directed. |
| 27 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 28 | M&L for Steel work in tubular pole including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 29 | M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Fe-410-W (Gde-E-250) Quality B) complete all as specified and directed. |
| 30 | S&F Mild steel screw bolts (machine made) 11mm to 15mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends and screwed other end or screed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but exc 10 cm but n.exc 15 cm long complete all as specified and directed. |
| 31 | M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide priming complete all as specified and directed. |
| 32 | Taking down PVC chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 33 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain or colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 34 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed. |
| 35 | Taken down and refixing in same opening, shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complte all as specified and directed. |
| 36 | Taking down chowkats or frames with shutters any type not exceeding 1.5 Sqm each (without taking off shutter from the frame) complete all as specidied and directed. |
| 37 | Taking down chowkats or frames with shutters exceeding 1.5 Sqm and not exceeding 4.0 Sqm each (without taking off shutter from the frame) complete all as specified and directed. |
| 38 | S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 39 | S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 40 | S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and directed |
| 41 | S & F 35mm thick 2nd class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, but divided in to square with plain, chamfered or rounded, mitred and rebated sash bar, any number fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR Part-I section 8 cluase 8.20 (a) supplied and fitted to chowkats complete all as specified and directed. |
| 42 | S&F 75mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 43 | S&F 100mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 44 | S& F 150mm long ISI marked aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 45 | S&F 150mm long ISI marked extruded aluminium alloy handles, cast type anodised complete as specified and directed. |
| 46 | S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fix complete all as specified and directed. |
| 47 | S&F in Repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 48 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 49 | S&F 4.80/5.00mm thick sheet glass selected quality and glazing in squares not exceeding 0.50 sqm in each pane of aluminium door / window complete all as specified and directed. |
| 50 | S&F in repairs Anodised aluminium grill (Dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 51 | S&F in repairs 15 mm bore bib taps cast copper alloy with Chromium plated crutch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 52 | S & F in repair 15mm bore stop valves chromium plated screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed |
| 53 | S&F in repair 15mm dia Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete including taking down old rusted tap complete all as specified and directed. |
| 54 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 55 | S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 56 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane including hacking out broken glass pane complete all as specified and directed. |
| 57 | S&F in repairs old decorative mild steel coloured curtain rod of 20 mm dia powder coated approved pattern & design including side cups & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs complete all as specified and directed. |
| 58 | S&F in repairs vitreous china wash hand basin white flat back size 550mmx400mm excluding taps waste chain and plug and breckets waste coupling brass CP 32 mm bore with long screwed shanks bedded in red lead cement and other end fixed and pillar taps 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks screwed and removing debris out of MoD land complete all as specified and directed. |
| 59 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white including seat & cover, flush pipe, connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed. |
| 60 | S&F in repair Vitreous china squatting pan, Orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern) including connection to trap, flushing pipe to squatting pan, anti-syphonage pipe, etc., and making good to floor complete all as specified and directed. |
| 61 | S&F in repair 10 litre capacity vitreous china valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 62 | S&F PVC(SWR) 110mm dia S trap including connecting to out let with solvent cement complete all as specified and directed. |
| 63 | S&F in repairs for PVC nahani trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with solvent cement of dia 75mm complete all as specified and directed. |
| 64 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 65 | S&F in repair brass chromium plated overhead shower 125mm dia round shape with swivel joints complete all as specified and directed. |
| 66 | S&F in repairs Toilet paper holder of brass, chromium plated or stainless steel with flat recessed type stainless steel Complete all as specified and directed |
| 67 | S&F Stainless kitchen steel sink with dranage board 1mm thick sheet of over all size 915x460mm with boul size 410x330x160mm including CP waste coupling and PVC waste pipe up to chamber fixed on and including cantilivers angle iron brackets of 2 Nos 25x25x3mm complete all as specified and directed. |
| 68 | S&F 100mm dia grating doom of stainless steel (Minimum weight 25gms) complete all as specified and directed. |
| 69 | S&F in repairs Soap dish, stainless steel, approximate size 160 x 160 x 90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 70 | S&F in repair straight glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 Cm wide with chromium plated bracket guard and railing 60 Cm long complete all as specified and directed. |
| 71 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed on the wall using wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 72 | S&F Stainless steel tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges fixed on the wall using wooden plugs with chromium-plated brass screws and cup washers complete all as specified and directed. |
| 73 | Dismantling water tanks, exc 250Ltr but not exc 500 ltr and removing to store complete all as specified and directed. |
| 74 | S&F Rotational moulded polyethylene water storage tanks of capacity 500 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 75 | S&F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and dirceted. |
| 76 | S&F in repairs 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm - 210 gms/25mm-455gms/40mm - 690 gms) complete all as specified and directed. |
| 77 | Taking down GI tubing 15mm bore complete all as specified and directed. |
| 78 | Taking down GI tubing 20mm bore complete all as specified and directed. |
| 79 | Supply and fix GI tubing 15mm bore medium grade with all fittings fixed to wall and ceiling complete all as specified and directed. |
| 80 | Supply and fix GI tubing 20mm bore medium grade with all fittings fixed to wall and ceiling complete all as specified and directed. |
| 81 | Demolition of plain cement concrete as in ground floor and paving not exceeding 15 cm thickness below or above ground level (unreinforced concrete) including disposing of debris off the premises complete all as specified and directed. |
| 82 | M&L for PCC 1:4:8 type D1 (using 40mm graded stone aggregate) as in sub base 75mm thick, finished fair & even complete all as specified and directed. |
| 83 | M&L for 100 mm thick; Plain Cement Concrete (PCC) 1:2:4 Type B-2 (using 40mm graded stone aggregate), as in top layer of the floor, pavings etc., including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all specified and directed. |
| 84 | M&L for 75 mm thick; PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in plinth protection, including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green and making saucer drain complete all as specified and directed. |
| 85 | M&L for PCC 1:2:4 type B-1, (using 20mm graded stone agreagete) as in coping, hold fast, saucer drain and the like including weathering slightly rounded or chamfered angles and throting as directed with necessary formwork and finishing expsoed faces of concrete complete all as specified and directed. |
| 86 | S&F 40mm unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceiling or in floorsincluding all fittings like bend, T, elbow etc complete all as specified and as directed |
| 87 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall complete all as specified and as directed. |
| 88 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall complete all as specified and as directed. |
| 89 | S & F 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 90 | S & F 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 91 | Taking down existing old unserviceable LT UG/service cable of any type or size complete all as specified and directed. |
| 92 | Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volt grade with stranded aluminium conductor of size 4 core x 16 sqmm complete all as specified and directed. |
| 93 | Excavation in trenches n .exc 1.5 mtr wide and not exec 1.5 mtr in depth for foundation etc or for laying pipe lines and cables and getting out as in looses/soft soil complete all as specified and directed. |
| 94 | Returning filling in including spreading leveling, watering and well ramming in layer not exe. 25 cm in soft/ loose soil, complete all as specified and directed. |
| 95 | Removing excavated material to a distance not exc 50m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed. |
| 96 | Supply and laying HDPE DWC pipe size outer dia 63 m, inner dia 50 mm for LT cable protection including sockets, bends etc complete all as specified and directed. |
| 97 | Galvanised iron steel tubes, ISI marked light grade of size 40mm bore for cable protection along the poles under road under drains complete all as specified and directed. |
| 98 | Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed. |
| 99 | Taking down old unserviceable distribution board by disconnection of electric connection carefully SPN DBs/ TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 100 | Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 101 | Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and directed. Please Enable Macros to View BoQ information |
| 102 | Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender