Housing Urban and Rular Development Government Departments Closing in 12 days TDR #58239195

Tender For Sagolmang To Molkon Via Saikul Including Construction Of Bailey Bridge At Thangkhanphai

Issued by Government Departments · Kangpokpi, Manipur
Tender Value
21.71 Crore
Estimated cost
Bid Submission
17 Nov 2026
12 days left
EMD
31.72 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangpokpi → Manipur
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Sagolmang To Molkon Via Saikul Including Construction Of Bailey Bridge At Thangkhanphai

BOQ

Name of Work:- Sagolmang to Molkon via Saikul including Construction of Bailey bridge at Thangkhanphai
Sl. No. Item Description
1SH: Improvement of Road
2D) Granular Base/Sub-Base with naturally occuring Sand Gravel material Providing laying and compacting Granular Base/Sub base according to lines, grades and cross sections by using naturally occurred Sand Gravel/confrming to IRC- Grd - II of MOST Specification free from organic or other deleterious constituent spread with motor grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickness) i/c rolling of the road surface to proper level and grades 30 cm width edging on both sides etc. complete as directed by Engineer-in-charge.
3Providing, Laying, Spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening, binding materials to fill up the interstices of Coarse aggregate, watering and compacting to the required density.i) Grading-I
4ii)Grading-II
5A) Prime Coat on WMM/WBM(i) P&A primer coat with bitumen emulsion on prepared surface of granular base i/c clearing of road surface and sprayung primer @ 0.7 kg/sqm using mechanical means
6P&A tack coat with bitumen emulsion using emulsion pressure distributor @ 0.20 kg/sqm on the prepared bituminous/ granular surface clean with mechanical brooms
7Open graded premix surfacing (Providing laying and rolling of open graded premix surfacing of 20 mm thckness composed of 13.2 mm to 5.6 mm aggregates using viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades)ii) Case -II: Using penetration grade bitumen and hot bitumen mixer 0.5cum.
8Seal Coat (providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A seal coats
9Surface Drains in soil (Construction of unlined surface drain of average cross sectional area 0.4 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 to 309. Excavated materials to be used in embankment at site within a lead of 1000 metres) A) Mechanical means
10SH: Construction of NP-3 pipe culvert
11Excavation for Structures (Earthwork in excavation of foundation of structures as per drawing and technical specifications, including setting out, construction of shorting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilizing the remaining earth locally for road work.)(i) Ordinary soil(B) Mechanical Means (Depth upto 3 m)
12Cement concrete 1:4:8 mix with stone aggregate 40 mm nominal size in foundation upto a depth of 1.5 metres below ground / bed level and upto height of 1.5 metre above ground / bed level
13Stone Masonry Work in Cement Mortar 1 : 3 in sub-structure Complete as per Drawing and Technical Specifications(A) Random Rubble Masonry
14Laying reinforced cement concrete pipe/ prestressed concrete pipe on first class bedding in single row. (Laying reinforced cement concrete pipe/ prestressed concrete pipe for culverts on first class bedding of granular material in single row i/c fixing collar with cement mortar 1:2 but e/c excavation, protection works, backfilling, concrete and masonry works in head walls and parapets.)NP-3 ii). 900 mm dia
15Plastering with cement mortar (1:3) on brick work in sub-structure as per Technical Specifications
16SH: Construction of 3m Breast Wall
17Excavation for Structures Earthwork in excavation of foundation of structures as per drawing and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling with approved material.(I) Ordinary soil(B) Mechanical Means (i) Depth upto 3 m
18Excavation for Structures Earthwork in excavation of foundation of structures as per drawing and technical specifications, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling with approved material.(I) Ordinary soil(B) Mechanical Means (i) Depth upto 3 m
19Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and Technical SpecificationsA Random Rubble Masonry
20Providing weep holes in brick masonry/ Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full wifth of the structure with slope of 1V:20H towards drawing face. Complete as per drawing and Technical specifications.
21SH: Road Safety Items
22Retro- reflectorised Traffic signs (Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)60 cm equilateral triangle
2360 cm circular
24Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or aluminium composite material sheet with overall thickness of 4mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x3mm angle mounted on a mild steel circular pipe 65 NB firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60cm, 60cm below ground level as per approved drawing.)
25Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc)(i) 5th kilometre stone (precast)
26(ii)Ordinary Kilometer stone (Precast)
27Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level, uniform and free from streaks and holes.)
28SH: Construction of 150 ft Span Bailey Bridge at Thangkanphai
29I. ExcavationEarth work in excavation in foundation for structures complete as per drawing and technical specification.Ordinary soil Mechanical Means i) Depth upto 3.0 m.
30ii) Depth 3.0 m. to 6.0 m.
31ii) Above 6.0 m.
32II. FoundationPlain /reinforced cement concrete in open foundation complete as per drawing and technical specification. PCC M15 Grade With Batching plant and Concrete Pump
33Plain /reinforced cement concrete in open foundation complete as per drawing and technical specification. R.C.C. M-35With Batching plant and Concrete Pump
34Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in foundation complete as per drawing and technical specification.HYSD bars in foundation (Fe 500)
35III. SubstructurePlain /reinforced cement concrete in sub structure complete as per drawing and technical specification. RCC M35 Grade With Batching plant, Transit Mixer and Concrete Pumpi) Above 10 m
36Supplying, Fitting and Placing HYSD bar Reinforcement in substructure complete as per drawing and technical specification. Using Batching plant, Transit Mixer and Concrete pump HYSD bars in substructure ( Fe 500 )
37Back filling behind abutment, wing walls and return walls complete as per drawing and technical specification.a)Granular material
38Providing and laying of filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MORTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specifications.
39Providing weep holes in Brick mansonary/plain/ /reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V: 20H towards drawing face complete as per drawing and technical specification.
40IV. SuperstructureAssembly & launching of Bailey Bridge within a lead of 50m but excluding mechanical transport. TDR Steel Decking. 40R Extrawidth
41Assembly and fixing of stiffened steel decking within a lead of 50m but excluding mechanical transport charges. TDR Steel Decking. 40R Extrawidth
42Manufacturing, supplying and transportation of DDR construction std width galvanised Bailey Bridge component suitable.
43Dismantelling of Structures (Dismanteling of existing structures like culverts, bridges, retaining wall and other structures comprising of masonary, cement concrete, wood work, steel work i/c T&P & scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material & staking the serviceable material within a lead of 1000m) i) Lime/cement concrete II) By machanical means B) Cement concrete Grade M-15 & M-20
44Dismanteling of stiffened steel decking i/c stacking neatly the dismanteled part by mechanical transport Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58239195
AUTHORITY Government Departments
TENDER VALUE 21.71 Crore
LAST DATE 17-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Sagolmang To Molkon Via Saikul Including Construction Of Bailey Bridge At Thangkhanphai
Basic Detail
Tender No EE/PWD/KPI/E-Tender/2026-27/4
Bidding Type Tender
Location
City Kangpokpi
State Manipur
Key Dates
Publish Date 28 Oct 2026
Submission Date 17 Nov 2026
Open Date 17 Nov 2026
Finance
Tender Value 21.71 Crore
Tender Fee 20000
EMD 31.72 Lakhs
Exemption Available
Document List
41a50d88-7870-412f-85c1-912b7b89134d.html
BOQ_3860.xls
GCC.pdf
NITSagolmangMolkon.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 28, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 17, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Nov 17, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

41a50d88-7870-412f-85c1-912b7b89134d.html

xls

BOQ_3860.xls

pdf

GCC.pdf

pdf

NITSagolmangMolkon.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender